Archive

Volume 74 (2023), Issue 2

Innovation of Traditional Furniture Surface Decoration Techniques with CNC Laser-Assisted Regression Modeling Production Method: Product Design Study

Authors:

Cebrail Açιk

Keywords:

laser woodworking; mother-of-pearl; filigree; inlay; wood carving

Volume 74 (2023), Issue 2

Impact of Wood Moisture Content on Structural Integrity of Wood Under Dynamic Loads

Authors:

Lukas Emmerich, Christian Brischke

Keywords:

brittleness; High-Energy Multiple Impact (HEMI) test; moisture content; moisture states; resistance to impact milling (RIM)

Volume 74 (2023), Issue 3

Criterion for Objective Determination of Threshold Value in Filtering Surface Roughness Signal of Solid Wood After Machining with Fast Fourier Transform (FFT) Based Filter

Authors:

Igor Đukić, Juraj Jovanović, Ivica Župčić, Matija Jug

Keywords:

machined surface roughness; anatomical roughness; circular saw; solid wood; signal analysis; threshold; FFT

Volume 74 (2023), Issue 4

Modeling of Color Design on Furniture Surfaces with CNC Laser Modification

Authors:

Cebrail Açιk

Keywords:

laser pyrography; furniture surfaces; color design

Volume 73 (2022), Issue 2

Analysis of Circular Saw Tooth Marks Profile on Material Machined Surface After Filtering with Fast Fourier Transform (FFT)

Authors:

Igor Đukić, Miran Merhar, Juraj Jovanović, Darko Herceg

Keywords:

machined surface roughness, circular saw, solid wood, signal analysis, FFT

Volume 73 (2022), Issue 3

Influence of Wood Surface Preparation on Roughness, Wettability and Coating Adhesion of Unmodified and Thermally Modified Wood

Authors:

Josip Miklečić, Andrea Lončarić, Nikolina Veseličić, Vlatka Jirouš-Rajković

Keywords:

face milling; sanding; UV irradiation; wetting; adhesion

Volume 73 (2022), Issue 4

Effects of CNC Processing Parameters on Surface Quality of Wood-Based Panels Used in Furniture Industry

Authors:

Aydin Demir, Evren Osman Cakiroglu, Ismail Aydin

Keywords:

wood-based panel; CNC milling machine; surface roughness; processing parameters

Volume 69 (2018), Issue 3

Experimental Examination and Modification of Chip Suction System in Circular Sawing Machine

Authors:

Jacek Baranski, Marcin Jewartowski, Jan Wajs, Kazimierz A. Orlowski, Tomasz Pikala

Keywords:

sliding table saw; chip removing system; experimental study

Volume 68 (2017), Issue 1

Interrelationship between Static a nd Dynamic Strength Properties of Wood and its Structural Integrity

Authors:

Christian Brischke

Keywords:

bending strength; High-Energy Multiple Impact (HEMI) tests; impact bending strength; modulus of elasticity; Resistance to Impact Milling (RIM)

Volume 67 (2016), Issue 3

Cutting Power during Milling of Thermally Modified Pine Wood

Authors:

Andrzej Krauss, Magdalena Piernik, Grzegorz Pinkowski

Keywords:

woodworking; thermal modification; cutting; lengthwise milling; power consumption; softwood; Pinus sylvestris L

Volume 67 (2016), Issue 3

Surface Roughness and Wettability Variation: The effect of Cutting Distance during Milling of Pinus Radiata Wood

Authors:

Aldo Rolleri, Francisco Burgos, Alfredo Aguilera

Keywords:

cutting distance; roughness; wettability; contact angle; wood; milling

Volume 66 (2015), Issue 2

Assessment of “Uso Fiume” Larch Beams Production in the Sawmilling Industry of Aosta Valley Region – Northwestern Italy

Authors:

Corrado Cremonini, Francesco Negro, Manuela Romagnoli, Roberto Zanuttini

Keywords:

Structural timber; larch; CE marking; Uso Fiume beams; sawmills; Aosta Valley

Volume 66 (2015), Issue 4

Production Costs as a Basic Factor of Competitiveness of Softwood Sawmilling

Authors:

Kristinka Liker, Andreja Pirc Barčić, Darko Motik

Keywords:

wood processing; costs; competitiveness; calculations; logs; sawn wood

Volume 66 (2015), Issue 2

Determination of Displacement in a Loaded Wooden Chair by Using Digital Image Correlation

Authors:

Milan Šimek, Zdeněk Dlauhý, Václav Sebera, Vít Novák, Adam Adam

Keywords:

standard furniture testing; digital image correlatio; chair; plywood; CNC

Volume 65 (2014), Issue 4

An Innovative Approach to the Forecasting of Energetic Effects While Wood Sawing

Authors:

Kazimierz A. Orlowski, Tomasz Ochrymiuk, Anthony Atkins

Keywords:

energetic effects; cutting power; wood sawing process; sawing machines; fracture mechanics; fracture toughness

Volume 64 (2013), Issue 1

CE Marking of Structural Timber: the European Standardization Framework and its Effects on Italian Manufacturers

Authors:

Francesco Negro, Corrado Cremonini, Roberto Zanuttini

Keywords:

structural timber; normative framework; CE marking; visual grading; machine grading

Volume 62 (2011), Issue 3

Sawing Capacities in the Czech Republic

Authors:

Petr Pražan

Keywords:

Czech sawmilling; sawmill production; sawing capacities; log cutting technology

Volume 62 (2011), Issue 2

Assessment of Wood Surface Quality Obtained During High Speed Milling by Use of Non-Contact Method

Authors:

Vít Novák, Miroslav Rousek, Zdeněk Kopecký

Keywords:

high-speed milling; wood surface quality; roughness; waviness; shape; filter

Volume 62 (2011), Issue 1

Application of Neural Network in Simple Tool Wear Monitoring and Indentification System in MDF Milling

Authors:

Marcin Zbieć

Keywords:

tool wear; wood machining monitoring; tool condition diagnostic system

Volume 61 (2010), Issue 2

Effect of Thermal Modification of Oak Wood on Sawdust Granularity

Authors:

Ladislav Dzurenda, Kazimierz A. Orlowski, Marek Grzeskiewicz

Keywords:

oak wood sawdust; thermal modification; frame sawing machine; granulometric analysis; granularity

Volume 60 (2009), Issue 4

Effect of Feed Speed and Wood Species on Roughness of Machined Surface

Authors:

Nedim Škaljić, Ružica Beljo Lučić, Anka Ozana Čavlović, Murčo Obućina

Keywords:

surface roughness; wood planing; feed speed; wood species

Volume 60 (2009), Issue 3

Sawmilling in the Czech Republic

Authors:

Jan Bomba

Keywords:

Czech sawmilling industry; development; sawmills; sawmilling products; technology

Volume 60 (2009), Issue 2

Utilization of contribution margin in the costing system in production of components for wood working machines

Authors:

Marek Potkány, Miloš Hitka

Keywords:

calculation; costing; cost; profit; contribution margin

Volume 59 (2008), Issue 3

Effect of technological parameters and wood properties on cutting power in plane milling of juvenile poplar wood

Authors:

Štefan Barcík, Eva Pivolusková, Richard Kminiak

Keywords:

milling; poplar; cutting power; juvenile wood; fast-growing trees

Volume 59 (2008), Issue 4

Sawmilling in Croatia Part 2 – Croatian Sawmilling in New Millennium

Authors:

Josip Ištvanić, Alan Antonović, Stjepan Pervan, Vladimir Jambreković, Zlatko Benković, Marijan Kavran

Keywords:

Croatian sawmilling industry; sawmilling technology; sawmilling raw material; sawmilling products

Volume 56 (2005), Issue 3

Influence of selected factors on granulometric composition of chips in plane milling of juvenile pine wood

Authors:

Štefan Barcík, Eva Pivolusková, Mária Kotlínová

Keywords:

pine wood; juvenile wood; mature wood; plane milling; granulometric analysis

Volume 56 (2005), Issue 3

Project of instrumentation of cyclic multiple-spindle driller aimed at improving its machining efficiency

Authors:

Grzegorz Wieloch, Marcin Osajda

Keywords:

multiple-spindle drilling machine; instrumentation; effectiveness

Volume 56 (2005), Issue 3

Monitoring of power consumption in high-speed milling

Authors:

Miroslav Rousek, Zdeněk Kopecký

Keywords:

wood machining; milling; high-speed; measurement; measuring stand

Volume 56 (2005), Issue 2

Granulometric analysis and separation options of dry sawdust exhausted from narrow-kerf frame sawing machines

Authors:

Ladislav Dzurenda, Kazimierz A. Orlowski, Roman Wasielewski

Keywords:

narrow-kerf frame sawing machine; dry sawdust; granulometric analysis; separation; environment

Volume 52 (2001), Issue 4

Quantity yield of European walnut sawlogs (Juglans regia L.) during sawmilling

Authors:

Tomislav Prka, Josip Ištvanić, Ana Trušček

Keywords:

European walnut (Juglans regia L.); sawmilling of European walnut; quantity yield; production of parquet; solid lam parquet; finished parquet

Volume 51 (2000), Issue 2

The combined machine’s short work breaks as quality indicators of air conveyors work

Authors:

Ankica Kos Pervan, Dubravko Horvat, Krešimir Šega

Keywords:

air conveyors work quality; wood dust cleaning; short work breaks; respirable fraction wood particles

Volume 46 (1995), Issue 2

Research of noise levels emitted by two-spindle moulders

Authors:

Ružica Beljo Lučić, Vlado Goglia

Keywords:

noise; woodworking machinery; noise protection

Volume 45 (1994), Issue 3

A contribution to the study of cutting resistance of milled beech

Authors:

Stjepan Risović

Keywords:

woodworking; beech; milling; cutting resistance

Volume 44 (1993), Issue 3

Influence of the sawing method on yields in fir/spruce log milling

Authors:

Jurica Butković

Keywords:

sawing methods; fir/spruce; yield

Volume 44 (1993), Issue 4

A contribution to the study of cutting resistance with machining of fir

Authors:

Stjepan Risović

Keywords:

wood maschining; fir; milling; cutting resistance

Volume 43 (1992), Issue 2

Research in the application of front milling to the processing of plain surfaces

Authors:

Vlado Goglia, Antun Šoštarić

Keywords:

front milling; plane surface machining; specific cutting energy; roughness

Volume 41 (1990), Issue 9-10

Edge bending small machines

Authors:

Stjepan Tkalec

Keywords:

edge banding machine; gluing of edge strips and veneer; capacity and flexibility, technology of edge lining

Volume 40 (1989), Issue 3-4

Konstrukcije proizvoda - osnova za određivanje sistema programiranja CNC-strojeva

Authors:

Stjepan Tkalec

Keywords:

Volume 40 (1989), Issue 7-8

Producing veneer of oak (quercus robur erch) by pyramidal cutting

Authors:

Franjo Penzar

Keywords:

oak wood; pyramidal cut; cutting with standard equipment; peeling-machine.

Volume 40 (1989), Issue 9-10

Research work of standard times of operations on a log band sawing machine

Authors:

Milan Vukićević

Keywords:

log band sawing machine; time of log processing; deterministic operations; stochasitic operations; time of log sawing

Volume 39 (1988), Issue 11-12

Comparative analysis of application of CNC and conventional line for finalization of solid wood parts in production of fronts for kitchen furniture

Authors:

Antun Tosenberger

Keywords:

computer adjustable and conventional line for finalization of solid wood in production of kitchen furniture fronts; time of manufacture; manufacturing costs

Volume 39 (1988), Issue 11-12

Development of oak wood sawmilling (Part 2)

Authors:

Tomislav Prka

Keywords:

Volume 39 (1988), Issue 9-10

Development of oak wood sawmilling

Authors:

Tomislav Prka

Keywords:

conventional sawmilling of oak; dimension stock technology of oak; conversion of thin oak logs

Volume 38 (1987), Issue 9-10

Development of timber conversion and utilization of Slavonian oak and other hardwood species in Croatia from 1699 to 1984

Authors:

Marko Gregić

Keywords:

forest exploitation; sawmilling and chemical processing of wood; woodworking; development of timber industry in Croatia

Volume 38 (1987), Issue 11-12

Optimization of operation mode on wood working machines with a constant main cutting speed

Authors:

Vlado Goglia

Keywords:

cutting process; mathematical model of function criterion of optimization

Volume 36 (1985), Issue 9-10

Sawmilling technology development

Authors:

Zdravko Horvat

Keywords:

prerada hrastovine; elektroničko računalo

Volume 35 (1984), Issue 3-4

Queueing theory and simulations in optimization of volume of maintainance service in industry

Authors:

Dalibor Benić

Keywords:

organization of production; maintainance of machines and equipment; appllication of queueing theory; application of simulations; operations research

Volume 34 (1983), Issue 1-2

Sociological and professional characteristics of workers and their influence on efficiency of work in sawmilling in region of Slavonia and Baranja

Authors:

Petar Madžarac

Keywords:

qualifying structure of workers; distance from place of residence to work place; labour turnover

Volume 34 (1983), Issue 4

Conversion of decidious species by combination of mechanical and chemical processing, particulary from aspect of solving the problem of wood waste

Authors:

Mile Orešković

Keywords:

chemical wood processing and sawmilling; wood waste; wood briquettes from sawdust and baric; integral utilization of wood

Volume 32 (1981), Issue 1-2

Some observations to sawmilling problems in Yugoslavia

Authors:

Ivica Milinović

Keywords:

reconstruction and modernization of sawmills; supply of logs to the sawmills; optimum capacity of sawmill; winter felling of beech logs

Volume 31 (1980), Issue 11-12

Production of woodworking machines in the SR of Croatia

Authors:

Mario Štambuk

Keywords:

woodworking machines in the SR of Croatia; development of production of woodworking machines

Volume 29 (1978), Issue 3-4

Comparative researches in production of sawn timber and purposively made wooden components

Authors:

Ramiz Zubčević

Keywords:

sawmilling of beech; dimension stock; standard sawn timber; quality-quantity and valuable coefficient of yield

Volume 28 (1977), Issue 1-2

Net planning technique application in term determination and control with the calculation on electronic computing machine

Authors:

Vjekoslav Međurečan, Zlatko Rupnik

Keywords:

net planning technique; net diagram; the earliest and the latest activity beginning; the earliest and the latest activity ending

Volume 27 (1976), Issue 9-10

Tool maintenance in woodworking industry

Authors:

Ivan Kovač

Keywords:

tool maintenance; tool sharpening; tool sharpening machine; abrasive plates

Volume 26 (1975), Issue 9-10

Standard operation time system on some machines for furniture manufacture

Authors:

Mladen Figurić

Keywords:

Innovation of Traditional Furniture Surface Decoration Techniques with CNC Laser-Assisted Regression Modeling Production Method: Product Design Study

Impact of Wood Moisture Content on Structural Integrity of Wood Under Dynamic Loads

Criterion for Objective Determination of Threshold Value in Filtering Surface Roughness Signal of Solid Wood After Machining with Fast Fourier Transform (FFT) Based Filter

Modeling of Color Design on Furniture Surfaces with CNC Laser Modification

Analysis of Circular Saw Tooth Marks Profile on Material Machined Surface After Filtering with Fast Fourier Transform (FFT)

Influence of Wood Surface Preparation on Roughness, Wettability and Coating Adhesion of Unmodified and Thermally Modified Wood

Effects of CNC Processing Parameters on Surface Quality of Wood-Based Panels Used in Furniture Industry

Experimental Examination and Modification of Chip Suction System in Circular Sawing Machine

Interrelationship between Static a nd Dynamic Strength Properties of Wood and its Structural Integrity

Cutting Power during Milling of Thermally Modified Pine Wood

Surface Roughness and Wettability Variation: The effect of Cutting Distance during Milling of Pinus Radiata Wood

Assessment of “Uso Fiume” Larch Beams Production in the Sawmilling Industry of Aosta Valley Region – Northwestern Italy

Production Costs as a Basic Factor of Competitiveness of Softwood Sawmilling

Determination of Displacement in a Loaded Wooden Chair by Using Digital Image Correlation

An Innovative Approach to the Forecasting of Energetic Effects While Wood Sawing

CE Marking of Structural Timber: the European Standardization Framework and its Effects on Italian Manufacturers

Sawing Capacities in the Czech Republic

Assessment of Wood Surface Quality Obtained During High Speed Milling by Use of Non-Contact Method

Application of Neural Network in Simple Tool Wear Monitoring and Indentification System in MDF Milling

Effect of Thermal Modification of Oak Wood on Sawdust Granularity

Effect of Feed Speed and Wood Species on Roughness of Machined Surface

Sawmilling in the Czech Republic

Utilization of contribution margin in the costing system in production of components for wood working machines

Effect of technological parameters and wood properties on cutting power in plane milling of juvenile poplar wood

Sawmilling in Croatia Part 2 – Croatian Sawmilling in New Millennium

Influence of selected factors on granulometric composition of chips in plane milling of juvenile pine wood

Project of instrumentation of cyclic multiple-spindle driller aimed at improving its machining efficiency

Monitoring of power consumption in high-speed milling

Granulometric analysis and separation options of dry sawdust exhausted from narrow-kerf frame sawing machines

Quantity yield of European walnut sawlogs (Juglans regia L.) during sawmilling

The combined machine’s short work breaks as quality indicators of air conveyors work

Research of noise levels emitted by two-spindle moulders

A contribution to the study of cutting resistance of milled beech

Influence of the sawing method on yields in fir/spruce log milling

A contribution to the study of cutting resistance with machining of fir

Research in the application of front milling to the processing of plain surfaces

Edge bending small machines

Konstrukcije proizvoda - osnova za određivanje sistema programiranja CNC-strojeva

Producing veneer of oak (quercus robur erch) by pyramidal cutting

Research work of standard times of operations on a log band sawing machine

Comparative analysis of application of CNC and conventional line for finalization of solid wood parts in production of fronts for kitchen furniture

Development of oak wood sawmilling (Part 2)

Development of oak wood sawmilling

Development of timber conversion and utilization of Slavonian oak and other hardwood species in Croatia from 1699 to 1984

Optimization of operation mode on wood working machines with a constant main cutting speed

Sawmilling technology development

Queueing theory and simulations in optimization of volume of maintainance service in industry

Sociological and professional characteristics of workers and their influence on efficiency of work in sawmilling in region of Slavonia and Baranja

Conversion of decidious species by combination of mechanical and chemical processing, particulary from aspect of solving the problem of wood waste

Some observations to sawmilling problems in Yugoslavia

Production of woodworking machines in the SR of Croatia

Comparative researches in production of sawn timber and purposively made wooden components

Net planning technique application in term determination and control with the calculation on electronic computing machine

Tool maintenance in woodworking industry

Standard operation time system on some machines for furniture manufacture

Publisher