Archive

Volume 75 (2024), Issue 2

Volume 74 (2023), Issue 4

Bio-Durability and Engineering Characteristics of Heat-Treated Poplar Wood

Authors:

Seyedeh Masoomeh Zamani, Reza Hajihassani, Saman Ghahri

Keywords:

poplar; thermo-wood; fungus; physical and mechanical properties; biological resistance

Volume 74 (2023), Issue 2

Determination of Machining Characteristics of Heat-Treated Siberian Pine (Pinus sibirica)

Authors:

Umit Ergin, Sait Dündar Sofuoğlu

Keywords:

heat treatment; machining parameter; roughness; Siberian pine; wood material

Volume 74 (2023), Issue 3

Anatomical Characteristics and Fibre Quality of Grapevine (Vitis vinifera L.) Stem Wood

Authors:

Kamile Tirak Hizal, Nihan Koçer

Keywords:

wood anatomy; fibre quality; fibre dimensions; fibre derivative indices

Volume 73 (2022), Issue 3

Wood Fibre Characteristics of Pedunculate Oak (Quercus R obur L.) Growing in Different Ecological Conditions

Authors:

Dušan Jokanović, Tatjana Ćirković-Mitrović, Vesna Nikolić Jokanović, Radoslav Lozjanin, Iva Ištok

Keywords:

pedunculate oak (Quercus robur L.); fibre characteristics; Gornji Srem; Donji Srem; wood variation

Volume 73 (2022), Issue 3

Influence of Moisture Content on Cutting Parameters and Fracture Characteristics of Spruce and Oak Wood

Authors:

Luďka Hanincová, Jiří Procházka, Vít Novák, Zdeněk Kopecký

Keywords:

cutting force; feed force; fracture toughness; shear yield strength; moisture content

Volume 73 (2022), Issue 1

Multivariate Hotelling T2 Control Chart for Monitoring Some Quality Characteristics in Medium Density Fiberboard Manufacturing Process

Authors:

Sebahattin Tiryaki, Aytaç Aydın

Keywords:

wood based panel industry; Hotelling T2; quality improvement; process control

Volume 73 (2022), Issue 2

Modelling and Investigating Real-World Drying Defects in Wood

Authors:

Darius Albrektas, Agne Styraite

Keywords:

wood moisture content; drying defects; resonant frequency; amplitude characteristics; transverse vibrations; modulus of elasticity; coefficient of damping

Volume 72 (2021), Issue 2

Evaluation of Creep Characteristics of Single- Staple Furniture Joints Made of Different Wood Species

Authors:

Samet Demirel, Seda Bas

Keywords:

creep; load level; single staple; wood joint

Volume 72 (2021), Issue 4

Finite Element Analysis of Dynamic Characteristics and Bending Stiffness for Cross Laminated Timber Floor Panels with and without Openings

Authors:

Ljiljana Kozarić, Smilja Bursać, Martina Vojnić Purčar, Miroslav Bešević, Žikica Tekić

Keywords:

cross laminated timber floors; bending stiffness; floors with openings; finite element analysis

Volume 72 (2021), Issue 1

Bending Characteristics of Laminated Wood Composites Made of Poplar Wood and GFRP

Authors:

Mehmet Nuri Yildrim, Abdurrahman Karaman, Mustafa Zor

Keywords:

poplar; wood laminate; bending strength; modulus of elasticity

Volume 71 (2020), Issue 4

Improving Weathering Performance of Wood by Borates Impregnation and Liquid Glass Coating

Authors:

Mustafa Kucuktuvek, Hilmi Toker, Turkay Turkoglu, Gokhan Gunduz, Ergun Baysal

Keywords:

weathering; boron compounds; liquid glass; wood coating; surface characteristics; building material

Volume 71 (2020), Issue 1

Anatomical, Chemical and Mechanical Characteristics of Beech Wood Degraded by Two Pleurotus Species

Authors:

Yaghoob Azimi, Mohsen Bahmani, Ali Jafari, Hamid Reza Riyahi Bakhtyari

Keywords:

Pleurotus cornucopiae; Pleurotus eryngii; Trametes versicolor; wood decay; chemical analysis; light microscopy

Volume 68 (2017), Issue 3

Fiber Characteristics of White Poplar (Populus alba L.) Juvenile Wood along the Drava River

Authors:

Iva Ištok, Bogoslav Šefc, Marin Hasan, Gordana Popović, Tomislav Sedlar

Keywords:

Populus alba L.; juvenile wood; fiber characteristics; wood anatomical properties variation

Volume 67 (2016), Issue 4

Characteristics of Design Process Organization in Selected Furniture Manufacturing Companies

Authors:

Beata Fabisiak

Keywords:

design; furniture companies; new product development process

Volume 66 (2015), Issue 3

Characteristics and Geographical Distribution of Fiddleback Figure in Wood of Acer pseudoplatanus L. in Slovenia

Authors:

Luka Krajnc, Katarina Čufar, Robert Brus

Keywords:

fiddleback figure; wavy grain; sycamore maple (Acer pseudoplatanus); commercial value; origin; Slovenia

Volume 66 (2015), Issue 1

Process Characteristics of Horizontal Log Band Saw in Cutting Frozen Beech

Authors:

Mikuláš Siklienka, Richard Kminiak, Filip Argay, Branimir Šafran, Igor Đukić

Keywords:

horizontal log band saw; band saw blade; stellite teeth; swaged teeth; cutting wedge wear; cutting power; surface quality

Volume 65 (2014), Issue 1

Evaluation of Material Characteristics of Xylite – Part 2. Characterization of Drying Defects

Authors:

Željko Gorišek, Aleš Straže

Keywords:

xylite; drying; drying defects; drying time; microscopy

Volume 64 (2013), Issue 4

Evaluation of Material Characteristics of Xylite – Part 1. Influence of Moisture Content on Some Mechanical Properties

Authors:

Željko Gorišek, Aleš Straže

Keywords:

xylite; moisture content; modulus of elasticity; modulus of rupture; shear strength; hardness

Volume 63 (2012), Issue 4

Some Physical and Mechanical Properties of Plum Tree (Prunus Domestica L.)

Authors:

Slavko Govorčin, Tomislav Sinković, Tomislav Sedlar, Iva Ištok, Marinko Vukadin

Keywords:

plum wood (Prunus domestica L.); plum pox virus; physical and mechanical properties of plum wood; macroscopic characteristics

Volume 62 (2011), Issue 2

Strength Characteristics of OSB in Bending – Difference between Upper and Lower Panel Faces

Authors:

Martin Böhm, Přemysl Šedivka, Jan Bomba, Jan Reisner

Keywords:

oriented strand boards (OSB); modulus of elasticity in bending (MOE); maximum deflection; image analysis

Volume 62 (2011), Issue 3

Determining the Characteristics of Composite Structure Laminae by Optical 3D Measurement of Deformation with Numerical Analysis

Authors:

Biserka Nestorović, Dušan Skakić, Ivica Grbac

Keywords:

optical 3D measurement; chair; shell; composite; material constants; stress; beech wood; finite elements

Volume 61 (2010), Issue 1

Energy Characteristics of Wood-Chips Produced from Salix Viminalis - Clone ULV

Authors:

Ladislav Dzurenda, Jarmila Geffertova, Vladimir Hecl

Keywords:

higher heating value; lower heating value; salix wood and bark; wood chips; energy plantations

Volume 57 (2006), Issue 3

Study of the office chairs comfort regard to subjects characteristics

Authors:

Zoran Vlaović, Andrija Bogner, Danijela Domljan

Keywords:

chair comfort; office chair; subjective method; ergonomics; anthropometry characteristics

Volume 55 (2004), Issue 3

Possible use of Euclid`s second theorem to determine the growth ring characteristics

Authors:

Ilker Usta, Radovan Despot, Marin Hasan

Keywords:

Euclid's second theorem; growth ring characteristics; Sytka spruce; earlywood; latewood

Volume 55 (2004), Issue 2

Viscoelasticity characteristics of wood at the change of moisture content

Authors:

Murčo Obućina, Ejub Džaferović, Jože Resnik

Keywords:

viskoelasticity; wood; creep; models

Volume 53 (2002), Issue 2

Research on antropometric characteristics of high school students and ergonomic characteristics of high school furniture

Authors:

Denis Jelačić, Krešimir Greger, Tomislav Grladinović

Keywords:

anthropometric characteristics; ergonomics; school furniture

Volume 47 (1996), Issue 1

The influence of circular saw natural frequency and excited frequency on the noise emission

Authors:

Vlado Goglia, Ružica Beljo Lučić

Keywords:

circular saw; natural frequency; noise emission; damping characteristics

Volume 46 (1995), Issue 1

Some structural characteristics of ashwood (Fraxinus angustifolia, Vahl.) from the Lipovljani region in Croatia

Authors:

Radovan Despot, Božidar Petrić, Jelena Trajković

Keywords:

variations of structural elements; juvenile wood; adult wood; ashwood

Volume 45 (1994), Issue 1

Some characteristics of means of transport in sawmill storages

Authors:

Ružica Beljo Lučić

Keywords:

handling material; means of transport; log storage; lumber storage

Volume 34 (1983), Issue 1-2

Sociological and professional characteristics of workers and their influence on efficiency of work in sawmilling in region of Slavonia and Baranja

Authors:

Petar Madžarac

Keywords:

qualifying structure of workers; distance from place of residence to work place; labour turnover

Volume 33 (1982), Issue 7-8

Some characteristics of preliminary work in production of furniture and possibilities of its improvement

Authors:

Zdravko Fučkar

Keywords:

preliminary work; block-digaram; operation of control; cybernetics

Volume 32 (1981), Issue 11-12

Some structural characteristics of adult homegrown oakwood (quercus robur, l.)

Authors:

Božidar Petrić, Velimir Šćukanec

Keywords:

characteristics of oakwood structural elements; volume participation of structural elements

Volume 32 (1981), Issue 11-12

Technological conditions contributing to the quality of wood laminated constructions

Authors:

Ladislav Lesić

Keywords:

wood laminated constructions; technological characteristics and quality of wood laminated constructions

Volume 31 (1980), Issue 9-10

Some structural characteristics of home-grown beechwood (Fagus silvatica, L.)

Authors:

Božidar Petrić, Velimir Šćukanec

Keywords:

participation and characteristics of beechwood structural elements

Volume 31 (1980), Issue 3-4

Some structural characteristics of juvenile and mature oakwood (Quercus robur L.)

Authors:

Božidar Petrić, Velimir Šćukanec

Keywords:

juvenile wood; variations of structural elements; limit of juvenile oakwood

Some Physical and Mechanical Characteristics of Waste Olive Oil Heat-Treated Oriental Beech Wood

Bio-Durability and Engineering Characteristics of Heat-Treated Poplar Wood

Determination of Machining Characteristics of Heat-Treated Siberian Pine (Pinus sibirica)

Anatomical Characteristics and Fibre Quality of Grapevine (Vitis vinifera L.) Stem Wood

Wood Fibre Characteristics of Pedunculate Oak (Quercus R obur L.) Growing in Different Ecological Conditions

Influence of Moisture Content on Cutting Parameters and Fracture Characteristics of Spruce and Oak Wood

Multivariate Hotelling T2 Control Chart for Monitoring Some Quality Characteristics in Medium Density Fiberboard Manufacturing Process

Modelling and Investigating Real-World Drying Defects in Wood

Evaluation of Creep Characteristics of Single- Staple Furniture Joints Made of Different Wood Species

Finite Element Analysis of Dynamic Characteristics and Bending Stiffness for Cross Laminated Timber Floor Panels with and without Openings

Bending Characteristics of Laminated Wood Composites Made of Poplar Wood and GFRP

Improving Weathering Performance of Wood by Borates Impregnation and Liquid Glass Coating

Anatomical, Chemical and Mechanical Characteristics of Beech Wood Degraded by Two Pleurotus Species

Fiber Characteristics of White Poplar (Populus alba L.) Juvenile Wood along the Drava River

Characteristics of Design Process Organization in Selected Furniture Manufacturing Companies

Characteristics and Geographical Distribution of Fiddleback Figure in Wood of Acer pseudoplatanus L. in Slovenia

Process Characteristics of Horizontal Log Band Saw in Cutting Frozen Beech

Evaluation of Material Characteristics of Xylite – Part 2. Characterization of Drying Defects

Evaluation of Material Characteristics of Xylite – Part 1. Influence of Moisture Content on Some Mechanical Properties

Some Physical and Mechanical Properties of Plum Tree (Prunus Domestica L.)

Strength Characteristics of OSB in Bending – Difference between Upper and Lower Panel Faces

Determining the Characteristics of Composite Structure Laminae by Optical 3D Measurement of Deformation with Numerical Analysis

Energy Characteristics of Wood-Chips Produced from Salix Viminalis - Clone ULV

Study of the office chairs comfort regard to subjects characteristics

Possible use of Euclid`s second theorem to determine the growth ring characteristics

Viscoelasticity characteristics of wood at the change of moisture content

Research on antropometric characteristics of high school students and ergonomic characteristics of high school furniture

The influence of circular saw natural frequency and excited frequency on the noise emission

Some structural characteristics of ashwood (Fraxinus angustifolia, Vahl.) from the Lipovljani region in Croatia

Some characteristics of means of transport in sawmill storages

Sociological and professional characteristics of workers and their influence on efficiency of work in sawmilling in region of Slavonia and Baranja

Some characteristics of preliminary work in production of furniture and possibilities of its improvement

Some structural characteristics of adult homegrown oakwood (quercus robur, l.)

Technological conditions contributing to the quality of wood laminated constructions

Some structural characteristics of home-grown beechwood (Fagus silvatica, L.)

Some structural characteristics of juvenile and mature oakwood (Quercus robur L.)

Publisher