Open Access Journal

Manuscript submission

Archive

Search results for: keyword or title 'band-saws'

Volume 73 (2022), Issue 2

Effects of Wooden Dowel Species, Edge Banding Thickness, and Adhesive Types on Embedded Strength in Particleboard

Authors:
Abdurrahman Karaman
Keywords:
PUR-D4, PVC edge banding, embedded strength of dowel, particleboard, dowel

Volume 67 (2016), Issue 1

Measurement of Wood Cutting Forces during Bandsawing Using Piezoelectric Dynamometer

Authors:
Payam Moradpour, Frieder Scholz, Kazem Doosthosseini, Asghar Tarmian
Keywords:
bandsawing; cutting forces; cutting speed; feed rate; piezoelectric dynamometer

Volume 66 (2015), Issue 1

Process Characteristics of Horizontal Log Band Saw in Cutting Frozen Beech

Authors:
Mikuláš Siklienka, Richard Kminiak, Filip Argay, Branimir Šafran, Igor Đukić
Keywords:
horizontal log band saw; band saw blade; stellite teeth; swaged teeth; cutting wedge wear; cutting power; surface quality

Volume 58 (2007), Issue 1

Noise and vibration in using framesaws and bandsaws

Authors:
Igor Đukić, Vlado Goglia
Keywords:
framesaw; bandsaw; noise; vibration

Volume 57 (2006), Issue 4

Comparison of gross energy standards of framesaws and bandsaws

Authors:
Igor Đukić, Vlado Goglia
Keywords:
framesaw; bandsaw; gross energy standard

Volume 56 (2005), Issue 3

Identification of critical speeds of clamped circular saws

Authors:
Kazimierz A. Orlowski
Keywords:
circular saw; critical rotational speed; methodology of determination

Volume 46 (1995), Issue 1

The influence of band saw strain force on idling power

Authors:
Ružica Beljo Lučić, Vlado Goglia
Keywords:
band saw; strain force; cutting speed; idling power

Volume 41 (1990), Issue 9-10

Edge bending small machines

Authors:
Stjepan Tkalec
Keywords:
edge banding machine; gluing of edge strips and veneer; capacity and flexibility, technology of edge lining

Volume 40 (1989), Issue 9-10

Research work of standard times of operations on a log band sawing machine

Authors:
Milan Vukićević
Keywords:
log band sawing machine; time of log processing; deterministic operations; stochasitic operations; time of log sawing

Volume 39 (1988), Issue 9-10

Influence of static tension on a band saw lateral stability

Authors:
Vlado Goglia, Vlado Kranjčec
Keywords:
band saw; lateral stability; static tension

Volume 39 (1988), Issue 9-10

Contribution to investigation of time required for performance on a log band saw

Authors:
Ivan Aleksov, Milan Vukićević
Keywords:
log band paw; time of log conversion; correlation; log diameter; number of cuts per log; log volume

Volume 39 (1988), Issue 5-6

Reduction of extreme stresses on band-saw blades through regulation of the cross-alignment angle of the pulleys

Authors:
Mario Štambuk
Keywords:
band-saw; band-saw blade; cross-aligning of band-saw pulleys; reduction of extreme stresses in band-saw blades

Volume 37 (1986), Issue 5-6

Kinematics of the band saw blade lateral movement

Authors:
Mario Štambuk
Keywords:
Band saws; Band saw blades; Lateral movement of the band saw blade.

Volume 36 (1985), Issue 3-4

Strain measurement on band saws

Authors:
Mario Štambuk
Keywords:
band-saws; band-saw blades; strain measurement

Volume 35 (1984), Issue 7-8

Cross-aligning of band-saw pulleys

Authors:
Mario Štambuk
Keywords:
band-saws; cross-aligning of band-saw pulleys; stresses in the saw band blades; wear and tear of the pulley rim

Volume 33 (1982), Issue 3-4

Qualitative comparison of different arrangement of saw blades in regard to utilization of logs on the frame-saws

Authors:
Vladimir Hitrec
Keywords:
simulation of sawing on the frame saw; volume utilization of logs; influential factors of utilization

Volume 33 (1982), Issue 5-6

Quality of sawing fir logs on frame-saws

Authors:
Đorđe Butković
Keywords:
quality of sawing; frame; saw

Volume 32 (1981), Issue 1-2

Determination of arrangement of saw blades by a method of simulated sawing of logs on the frame saws

Authors:
Vladimir Hitrec
Keywords:
optimization of sawing; simulation of sawing; volume utilization; value utilization

Volume 29 (1978), Issue 5-6

Magnetic controller for acme measurement of the band saw blade transverse deflected shape

Authors:
Mario Štambuk
Keywords:
band saw blade; band saw

Volume 29 (1978), Issue 5-6

Utilization of low quality beech logs sawn on band saw by two different methods

Authors:
Marko Gregić
Keywords:
conversion of Iow quality beech Iogs; »radial« and »tangential« sawing on band saws; quantity, quality and value yield

Publisher

Faculty of Forestry and Wood Technology
HRCAK
ORCID
DOI
CROSSREF

DRVNA INDUSTRIJA Scientific Journal of Wood Technology

ISSN 0012-6772 (Print) / ISSN 1847-1153 (Online)

Faculty of Forestry and Wood Technology University of Zagreb, Svetošimunska 25, 10000 Zagreb, Hrvatska - Croatia
Tel: +3851 2352 430, E-mail: drind@sumfak.hr
Editor-in-Chief: Prof. Ružica Beljo-Lučić, Ph.D. E-mail: editordi@sumfak.hr
Cookie settings