Archive | Drvna Industrija Journal

Volume 75 (2024), Issue 1

Thermal Modification Intensity of Heat-treated Poplar Wood. Part 2: Characterization and Predication from Outside to Core Layers

Authors:

Yang Li, Yong Zhu, Shengquan Liu, Zuju Shu, Redžo Hasanagić, Fathi Leila, Demiao Chu

Keywords:

heat treatment; modification intensity; transition; hardness; color; surface layer; inner layers; poplar wood

Volume 75 (2024), Issue 1

Comparative Study on Dimensional Stability and Biological Durability of Poplar Wood Modified by Chemical and Heat Treatment

Authors:

Ajmal Samani, Sauradipta Ganguly, Sanjeet Kumar Hom, Varun Sharma

Keywords:

biological durability; chemical modification; dimensional stability; heat treatment

Volume 75 (2024), Issue 2

Dimensional Stability Properties of Medium-Density Fiberboards Produced Using Silicone-Based Chemicals

Authors:

Meryem Ondaral, Mustafa Usta, Sedat Ondaral

Keywords:

MDF; hydrophobic; silicone-based chemical; water repellent; dimensional stability

Volume 74 (2023), Issue 4

Thermal Modification Intensity of Heat-treated Poplar Wood Part 1: Characterization and Predication of Surface Layer

Authors:

Yang Li, Tao Yao, Yong Zhu, Zuju Shu, Shengquan Liu, Redžo Hasanagić, Fathi Leila, Demiao Chu

Keywords:

heat treatment; modification intensity; hardness; color; poplar wood

Volume 74 (2023), Issue 4

Influence of Pre-Impregnation Acetic Anhydride and Heating Time on Mechanical and Physical Properties of Wood-Plastic Composites

Authors:

Seyyed Khalil Hosseinihashemi, Mohammad-Ali Akhoundi, Younes Shirmohammadli, Nadir Ayrilmis

Keywords:

WPCs; wood flour; acetylation; chemical modification; mechanical properties

Volume 74 (2023), Issue 3

Improving Surface Quality of Resin Impregnated Paper Used for Laminated Flooring Overlaid

Authors:

Meltem Cengiz Önal, Ahmet Gençer, Tülin Gürkan Polat, Abdullah Sütçü

Keywords:

melamine-faced laminate; surface modification; experiment design; functional coating

Volume 74 (2023), Issue 3

Physical and Chemical Properties of Highland Bamboo (Yushania alpina) Culms Grown in Ethiopia

Authors:

Mahadi Mussa, Getachew Desalegn, Gemechu Kaba, Anteneh Tesfaye

Keywords:

bamboo (Yushania alpina); basic density; cellulose; lignin; moisture content; shrinkage

Volume 74 (2023), Issue 3

Selected Chemical and Physical Properties of Pine Wood Chips Inoculated with Aspergillus and Penicillium Mold Fungi

Authors:

Radosław Mirski, Jakub Kawalerczyk, Dorota Dziurka, Kinga Stuper-Szablewska, Joanna Walkiewicz

Keywords:

mold fungi; wood chips; FTIR spectroscopy; mass loss; hygroscopicity

Volume 74 (2023), Issue 3

Chemical Content and Antimicrobial Activities of Essential Oils Obtained from Plant Parts of Juniperus excelsa M. Bieb.

Authors:

Emrah Saruhan, Mehmet Öz

Keywords:

antimicrobial activity; chemical content; GC-MS; essential oil; Juniperus excelsa M. Bieb.

Volume 74 (2023), Issue 1

Synthesis of Phenolic Resin Reinforced with TiO2 Nanoparticles and its Effect on Combustion Performance of Laminated Veneer Lumber (LVL)

Authors:

Günay Özbay, Musa Atar, Ayhan Ozcifci

Keywords:

adhesive; combustion; FT-IR; nano-chemicals; TiO2 nanoparticles

Volume 74 (2023), Issue 1

The Influence of Different Wood Modifications on Pull-out Force of Rotary Welded Dowels

Authors:

Ivica Župčić, Igor Đukić, Matija Jug, Mario Jurišić, Marin Hasan

Keywords:

rotary welding; thermal modification; modification with citric acid; pull-out force; wooden dowels

Volume 74 (2023), Issue 4

Modeling of Color Design on Furniture Surfaces with CNC Laser Modification

Authors:

Cebrail Açιk

Keywords:

laser pyrography; furniture surfaces; color design

Volume 74 (2023), Issue 4

Comparison of Reaction Wood and Normal Wood of Some Commercial Tree Species

Authors:

Sevinç Kaz, Saim Ateş, Tuba Külçe

Keywords:

pine; fir; oak; beech; anatomical and chemical structure

Volume 73 (2022), Issue 2

Surface Roughness of Sliced Veneers in Terms of Defects and Wood Structure Variability – Impact of Mild Hydrothermal Treatment

Authors:

Vasiliki Kamperidou, Efstratios Aidinidis, Ioannis Barboutis

Keywords:

knot, modification, quality, surface property, texture, veneer

Volume 73 (2022), Issue 2

Physical and Mechanical Properties and Decay Resistance of Poplar Modified with mDMDHEU

Authors:

Huseyin Sivrikaya, Ahmet Can

Keywords:

wood modification, mDMDHEU, dimensional stability, MOR, FTIR, TGA, decay resistance

Volume 73 (2022), Issue 2

Chemical Changes and Environmental Issues of Heat Treatment of Wood

Authors:

Nikolina Barlović, Anka Ozana Čavlović, Stjepan Pervan, Miljenko Klarić, Silvana Prekrat, Nikola Španić

Keywords:

heat treatment, heat-treated wood, wood components, colour change, ecology

Volume 72 (2021), Issue 3

The Effect of Artificial Weathering on Surface Properties of Thermally Modified Oriental Beech Wood

Authors:

Turkay Turkoglu, Hilmi Toker, Ergun Baysal, Ahmet Gunduz, Caglar Altay, Mustafa Kucuktuvek, Huseyin Peker

Keywords:

thermal modification; Oriental beech wood; color; surface roughness; artificial weathering; construction materials

Volume 72 (2021), Issue 2

Chemical and Structural Characterization of Poplar and Black Pine Wood Exposed to Short Thermal Modification

Authors:

Vasiliki Kamperidou

Keywords:

cellulose; chemical composition; FTIR; lignin; thermal treatment; wood

Volume 72 (2021), Issue 3

Heat-Treated Wood Reinforced High Density Polyethylene Composites

Authors:

Kadir Karakuş, Deniz Aydemir, Gokhan Gunduz, Fatih Mengeloğlu

Keywords:

HDPE; wood flour; thermal modification; heat treatment; polymer composite

Volume 71 (2020), Issue 1

Anatomical, Chemical and Mechanical Characteristics of Beech Wood Degraded by Two Pleurotus Species

Authors:

Yaghoob Azimi, Mohsen Bahmani, Ali Jafari, Hamid Reza Riyahi Bakhtyari

Keywords:

Pleurotus cornucopiae; Pleurotus eryngii; Trametes versicolor; wood decay; chemical analysis; light microscopy

Volume 71 (2020), Issue 1

Properties of Plywood Produced with Urea-Formaldehyde Adhesive Modified with Nanocellulose and Microcellulose

Authors:

Jakub Kawalerczyk, Dorota Dziurka, Radosław Mirski, Kinga Szentner

Keywords:

nanocellulose; microcellulose; urea-formaldehyde resin; plywood; modification

Volume 71 (2020), Issue 1

Hygrothermal Treatment of Tepa (Laureliopsis philippiana Looser) Fibers: Effects on Chemical and Physical Properties

Authors:

Rommel Crespo Gutiérrez, Marco Torres Uribe, Hernán Wilson

Keywords:

hygrothermal treatment; Laureliopsis philippiana; fibers; physical and chemical properties; acidity; fiberboards

Volume 71 (2020), Issue 2

The Influence of Wood Modification on Transfer Function of a Violin Bridge

Authors:

Miran Merhar, Miha Humar

Keywords:

violin bridge; excitation; transfer function; finite element method; Ansys; wood modification

Volume 71 (2020), Issue 1

Synthesis of Bio-Oilphenol-Formaldehyde Resins under Alkali Conditions: Physical, Chemical and Thermal Properties of Resins and Bonding Performance

Authors:

Günay Özbay, Caglar Cekic, Muhammad Syarhabil Ahmad, Erkan Sami Kokten

Keywords:

bio-phenol; bonding performance; phenol formaldehyde resin; shear strength

Volume 70 (2019), Issue 4

Assessment of Efficacy and Effectiveness of Some Extracted Bio-Chemicals as Bio-Fungicides on Wood

Authors:

Mohamed Z. M. Salem, Safa Abd El-Kader Mohamed Hamed, Maisa M. A. Mansour

Keywords:

bio-fungicides; wood; essential oils; extracts; antifungal activity

Volume 70 (2019), Issue 4

The Effect of Using Alum Mordant in Wild Cherry Bark Dyestuff for the Production of UV Resistant Colored Paper

Authors:

Ayhan Gençer, Ahmet Can, Aysun Mustak, Ülkü Burcu Gitti

Keywords:

wild cherry bark; chemical-thermomechanical pulp (CTMP); alum; weathering

Volume 70 (2019), Issue 2

Chemical and Application Properties of Some Solvent and Water Based Coatings on Wooden Substrate

Authors:

Shikhar Shukla, Krishna K. Pandey, Kishan Kumar

Keywords:

organic coatings; water borne coatings; NC lacquer; polyurethane; Melia dubia; film thickness; FTIR; gloss

Volume 70 (2019), Issue 1

Abrasion Resistance of Thermally and Chemically Modified Timber

Authors:

Christian Brischke, Neele Ziegeler, Susanne Bollmus

Keywords:

flooring; chemical wood modification; Shaker method; Taber Abraser; thermally modified wood; wear

Volume 69 (2018), Issue 3

Effects of Catalysts on Modulus of Rupture and Chemical Structure of Heat – Treated Wood

Authors:

Ayhan Ozcifci, Erkan Sami Kokten, Nadir Ayrilmis, Günay Özbay, Suat Altun

Keywords:

heat treatment; Scotch pine; mechanical strength; catalyst; chemical properties

Volume 69 (2018), Issue 3

Experimental Examination and Modification of Chip Suction System in Circular Sawing Machine

Authors:

Jacek Baranski, Marcin Jewartowski, Jan Wajs, Kazimierz A. Orlowski, Tomasz Pikala

Keywords:

sliding table saw; chip removing system; experimental study

Volume 69 (2018), Issue 3

Susceptibility of Thermo-Mechanically Modified Scots Pine (Pinus Sylvestris L.) Sapwood and Heartwood to Colour Change under the Influence of Ultraviolet Radiation

Authors:

Agnieszka Laskowska

Keywords:

colour; densification; heartwood; sapwood; Scots pine; thermo-mechanical modification

Volume 69 (2018), Issue 1

Chemical Composition, Fiber Morphology, and Kraft Pulping of Bracken Stalks (Pteridium aquilinum (L.) Kuhn)

Authors:

Sezgin Koray Gülsoy, Serhat Şimşir

Keywords:

bracken; KBH4; kraft; NaBH4; Pteridium aquilinum (L.) Kuhn.; paper properties

Volume 68 (2017), Issue 4

The Effect of Heat Modification and Densification on Physical Properties of Poplar Wood

Authors:

Gonca Düzkale Sözbir, İbrahim Bektaş

Keywords:

poplar wood; densification; heat modification; physical properties

Volume 68 (2017), Issue 2

Chemical Characterization of Lebonan Cedar Tar

Authors:

Ayben Kilic Pekgözlü, Suleyman Kustas, Burak Mercan, Aziz Bicer

Keywords:

Cedrus libani; himachalane; pyrolysis; GC-MS; Jenkner Retort

Volume 68 (2017), Issue 2

Chemical Characterization of Bio-oil from Pyrolysis of Undecayed and Decayed Fagus orientalis Wood

Authors:

Seyyed Khalil Hosseinihashemi, Saeed Hassani, Ahmad Jahan Latibari, Günay Özbay

Keywords:

beech wood; Trametes versicolor; pyrolysis; GC/MS; oil compound

Volume 68 (2017), Issue 1

Chemical and Physical Properties of Pine Wood during Pyrolysis

Authors:

Karol Ronewicz, Jacek Kluska, Łukasz Heda, Dariusz Kardaś

Keywords:

pyrolysis; pine wood; wood permeability; wood density; pyrolysis gas; thermogravimetric analysis

Volume 67 (2016), Issue 3

Calorific Value and Chemical Properties in Juvenile and Mature Wood of Thermally-Modified Eucalyptus Grandis

Authors:

Fred Willians Calonego, Elias Taylor Durgante Severo, Cláudio Angeli Sansígolo, Marcos Antonio de Rezende, Edson Marcelo Bruder, Vladimir Eliodoro Costa

Keywords:

biomass; energy; chemical properties; Eucalypts; thermally-modified wood

Volume 67 (2016), Issue 3

Cutting Power during Milling of Thermally Modified Pine Wood

Authors:

Andrzej Krauss, Magdalena Piernik, Grzegorz Pinkowski

Keywords:

woodworking; thermal modification; cutting; lengthwise milling; power consumption; softwood; Pinus sylvestris L

Volume 67 (2016), Issue 3

Investigation of Isatis Tinctoria and Isatis Buschiana Stalks as Raw Materials for Pulp and Paper Production

Authors:

Nazan Comlekcioglu, Ahmet Tutuş, Mustafa Çiçekler, Asuman Canak, Gulsen Zengin

Keywords:

I. tinctoria; I. buschiana; chemical composition; pulp; paper

Volume 67 (2016), Issue 2

Chemical Composition of Straw as an Alternative Material to Wood Raw Material in Fibre Isolation

Authors:

Ivana Plazonić, Željka Barbarić-Mikočević, Alan Antonović

Keywords:

straw; wheat; barley; triticale; chemical composition

Volume 67 (2016), Issue 1

Effect of Press Cycle Time on Application Behavior of Board Made from Chemically Modified Particles

Authors:

Maryam Ghorbani, Fatemeh Bavaneghi

Keywords:

press time; acetylation; particleboard; thickness swelling; mechanical strength; decay resistance

Volume 67 (2016), Issue 1

Influence of Thermal Modification on Surface Properties and Chemical Composition of Beech Wood (Fagus sylvatica L.)

Authors:

Josip Miklečić, Vlatka Jirouš-Rajković

Keywords:

thermal modification; contact angle; surface free energy; wood chemical composition

Volume 66 (2015), Issue 3

Chemical Composition of Oleoresin and Larvae Gallery Resin of Pinus Brutia Attacked by Dioryc tria Sylvestrella Ratz.

Authors:

Mehmet Öz, İlhan Deniz, Onur Tolga Okan, M. Said Fidan

Keywords:

Acid-Paste Method; Dioryctria sylvestrella Ratz; Larvae gallery resin; Oleoresin; Pinus brutia

Volume 66 (2015), Issue 4

Water Uptake of Thermally Modified Norway Spruce

Authors:

Mojca Zlahtic, Nejc Thaler, Miha Humar

Keywords:

load cell; Picea abies; tensiometer; thermal modification; water uptake; field testing

Volume 64 (2013), Issue 3

Dimensional Stability of Plywood Panels Made from Thermally Modified Poplar Veneers in the Conditions of Variable Air Humidity

Authors:

Vladislav Zdravković, Aleksandar Lovrić, Bojana Stanković

Keywords:

thermal modification; poplar veneer; plywood panels; dimensional stability; ASE

Volume 64 (2013), Issue 1

Studies on Mechanical Properties of Composite Materials Based on Thermo Modified Timber

Authors:

Evgeny Razumov, Ruslan Safin, Štefan Barcík, Monika Kvietková, Khasanshin Romelevich

Keywords:

thermo modification; wood-filled composite; wood-concrete

Volume 63 (2012), Issue 1

Compression Strength of Fir and Beech Wood Modified by Citric Acid

Authors:

Bogoslav Šefc, Jelena Trajković, Tomislav Sinković, Marin Hasan, Iva Ištok

Keywords:

Fir wood (Abies alba Mill.); beech wood (Fagus sylvatica L.); chemical modification; citric acid (CA); compression strength

Volume 62 (2011), Issue 4

Extraction Methods of Spanish Broom (Spartium Junceum L.)

Authors:

Drago Katović, Andrea Katović, Alan Antonović

Keywords:

Spanish Broom fibers; fiber extraction; chemical composition; FTIR; MW

Volume 62 (2011), Issue 4

Accelerated Weathering of Coated and Uncoated Beech Wood Modified with Citric Acid

Authors:

Josip Miklečić, Vlatka Jirouš-Rajković

Keywords:

chemical modification; citric acid; QUV weathering; wood stain; beech wood

Volume 62 (2011), Issue 4

Alteration of Water Absorption Coefficient of Spruce (Picea abies (L.) Karst.) due to Thermal Modification

Authors:

Alexander Pfriem

Keywords:

anisotropy; thermal modification; water absorption coefficient

Volume 62 (2011), Issue 1

Influence of Thermal Modification of Beech on the Strength of Longitudinally Connected Turned Elements by Rotational Welding Method

Authors:

Ivica Župčić, Marko Mijaković, Ivica Grbac

Keywords:

beech; welding of solid and modified wood; strength of welded joints; longitudinal bonding

Volume 61 (2010), Issue 1

Economic Aspects of Raw Material Inputs for SAQ Pulp Production at the Time of Crisis

Authors:

Zoltán Nagy, Josef Drábek

Keywords:

pulp and paper industry; raw material inputs; economic efficiency; semi-chemical (SC) fluting; soda anthraquinone (SAQ) pulp production

Volume 61 (2010), Issue 2

Effect of Thermal Modification of Oak Wood on Sawdust Granularity

Authors:

Ladislav Dzurenda, Kazimierz A. Orlowski, Marek Grzeskiewicz

Keywords:

oak wood sawdust; thermal modification; frame sawing machine; granulometric analysis; granularity

Volume 61 (2010), Issue 1

Influence of Urea-Formaldehyde Resin Modification with Liquefied Wood on Particleboard Properties

Authors:

Alan Antonović, Vladimir Jambreković, Jaroslav Kljak, Nikola Španić, Sergej Medved

Keywords:

liquefied wood (LW); composite materials; urea-formaldehyde (UF) resin modification; liquefied wood-formaldehyde (LWF) resin

Volume 60 (2009), Issue 3

Welding of thermally modified hornbeam

Authors:

Ivica Župčić, Goran Mihulja, Slavko Govorčin, Andrija Bogner, Ivica Grbac

Keywords:

welding wood; dowels; thermal modification; hornbeam

Volume 60 (2009), Issue 2

Fire retardants for wood

Authors:

Vlatka Jirouš-Rajković, Josip Miklečić

Keywords:

wood; combustion of wood; fire retardants; fire retardant coatings; chemical impregnation by pressure-treating

Volume 60 (2009), Issue 1

Dimensional stability of wood modified by citric acid using different catalysts

Authors:

Bogoslav Šefc, Jelena Trajković, Marin Hasan, Drago Katović, Sandra Bischof Vukušić, Martina Frančić

Keywords:

dimensional stability of wood; beech wood; fir wood; chemical modification; citric acid; NaH2PO2; NaH2PO4

Volume 59 (2008), Issue 2

Biological durability of wood modified by citric acid

Authors:

Radovan Despot, Marin Hasan, Matija Jug, Bogoslav Šefc

Keywords:

chemical modification of wood; esterification; citric acid; biological durability; Poria placenta; beechwood

Volume 59 (2008), Issue 1

Ecological issues of byproducts in hydrothermal wood processing

Authors:

Stjepan Pervan, Goran Draščić, Alan Antonović

Keywords:

hydrothermal wood processing; atmospheric emission; condensate; chemical constituents

Volume 58 (2007), Issue 3

Influence of sampling location on sapwood group chemical composition of beech wood (Fagus sylvatica L.)

Authors:

Alan Antonović, Vladimir Jambreković, Stjepan Pervan, Josip Ištvanić, Maja Moro, Janja Zule

Keywords:

group chemical composition; beech wood (Fagus sylvatica L.); sapwood; sampling location; phytocoenological criteria

Volume 58 (2007), Issue 1

Methods for improving building wood properties

Authors:

Vlatka Jirouš-Rajković, Hrvoje Turkulin, Vjekoslav Živković

Keywords:

wood modification; heat-treated wood; acetylation; nano-coatings; wood-plastic composites; WPC

Volume 55 (2004), Issue 4

Alternative agents and methods for chemical modification of wood

Authors:

Drago Katović, Jelena Trajković, Sandra Bischof Vukušić, Bogoslav Šefc

Keywords:

chemically modified wood; citric acid - CA; DMDHEU; microwave treatment; dimensional stability; discoloration

Volume 54 (2003), Issue 4

Modification of wood with dimethyloldihydroxyethylenurea

Authors:

Miro Tomažič, Borut Kričej, Matjaž Pavlič, Marko Petrič

Keywords:

dimethyloldihydroxyethylenurea DMDHEU; modified wood; properties

Volume 52 (2001), Issue 2

Oil-heat-treatment of wood - process and properties

Authors:

Andreas Rapp, Michael Sailer

Keywords:

oil-heat modification of wood; properties of modified wood

Volume 52 (2001), Issue 2

Wood modification - a promising method for wood preservation

Authors:

Gregor Rep, Franc Pohleven

Keywords:

wood modification; wood preservation; durability; mechanical properties; timber

Volume 50 (1999), Issue 3

Modification of the beech – wood surface by UV – irradiation

Authors:

Goran Mihulja, Andrija Bogner, Hrvoje Turkulin

Keywords:

beech-wood; surface modification; UV light; glue-bond strength

Volume 49 (1998), Issue 3

A supplement to the knowledge on chemical properties of beech bark

Authors:

Neven Bujas

Keywords:

beech; chemical properties of beech bark; HPLC; metals

Volume 48 (1997), Issue 2

Production possibilities for structurally protected plywood by chemical fire-retardants

Authors:

Mladen Brezović

Keywords:

structural protection; fire-retardant chemicals; physical and mechanical properties; fire-retardance; fire-tube method

Volume 45 (1994), Issue 4

Removing the original coating off a wooden substrate

Authors:

Vlatka Jirouš-Rajković

Keywords:

coating; paint stripping; sanding; scraping; chemical strippers

Volume 45 (1994), Issue 3

Contributions to the knowledge of the Adriatic sea wood marine borers

Authors:

Radovan Despot

Keywords:

marine wood borers; Mediterranean and Adriatic sea; chemical protection of wood in the sea

Volume 44 (1993), Issue 4

Wettability of wood and adhesion

Authors:

Andrija Bogner

Keywords:

Wetting; Wetting angle; Adhesion; penetration; Spreading; Wood modification

Volume 41 (1990), Issue 5-6

Modification of wood surface for the purpose of a better gluing

Authors:

Andrija Bogner

Keywords:

modification of joint; wetting; gluing; roughness; penetration; joint strength

Volume 40 (1989), Issue 11-12

Protection of fir wood joinery by double vacuum method

Authors:

Božidar Petrić, Velimir Šćukanec, Radovan Despot, Jelena Trajković

Keywords:

Chemical protection of fir wood; double vacuum method; penetration and apsorption of wood preservative

Volume 39 (1988), Issue 5-6

Chemical and anatomical properties and possibility of firwood sawmill residue utilization for high-yield chemimechanical pulps production

Authors:

Tatjana Stevanović Janežić, Biljana Bujanović

Keywords:

firwood sawmill residue; Abies pectinata; chemical composition; anatomical properties; softwood chips; high-yield pulps; chemimechanical pulping; chemithermomechanical pulping; softwood sulfonation; quuinomethide; sulphonated lignin; better qualities CMP/CTMP

Volume 38 (1987), Issue 9-10

Development of timber conversion and utilization of Slavonian oak and other hardwood species in Croatia from 1699 to 1984

Authors:

Marko Gregić

Keywords:

forest exploitation; sawmilling and chemical processing of wood; woodworking; development of timber industry in Croatia

Volume 37 (1986), Issue 3-4

Preliminary investigation of fire-retardant treatments for flakeboards

Authors:

Theodore Laufenberg, Susan Le Van, Vladimir Bruči

Keywords:

fire protective chemicals; oxygen index

Volume 37 (1986), Issue 9-10

Integral utilization of raw material

Authors:

Vladimir Sertić

Keywords:

chemical conversion of wood; pulp and paper; thermal conversion; hydrolysis of carbohydrates; lignin; extractives

Volume 36 (1985), Issue 5-6

Fire retardant chemicals for increase of fire resistance of high density fibreboards manufactured by dry process and mdf boards

Authors:

Vladimir Bruči, Marina Tatalović

Keywords:

fire retardant agent; flame spread index

Volume 36 (1985), Issue 9-10

On the chemism of endocarp of some forest trees and bushes

Authors:

Milan Kaić

Keywords:

endocarp; forest by-products; chemical ingredients; mineral stuff

Volume 34 (1983), Issue 4

Conversion of decidious species by combination of mechanical and chemical processing, particulary from aspect of solving the problem of wood waste

Authors:

Mile Orešković

Keywords:

chemical wood processing and sawmilling; wood waste; wood briquettes from sawdust and baric; integral utilization of wood

Volume 34 (1983), Issue 7-8

Determination of quantity of glue in wood-based panel products

Authors:

Salah-Eldien Omer

Keywords:

chemical and physical methods; infrared spectrometry and X-ray spectrometry

Volume 33 (1982), Issue 11-12

Preservation of beech sleepers during storage in warehouses

Authors:

Slavko Kovačević, Magda Hlevnjak

Keywords:

anatomy of beechwood; wood-destroying fungi; chemical agents for preservation of wood

Volume 33 (1982), Issue 3-4

Laboratory tests of possibilities to manufacture fire-retardant particle boards

Authors:

Salah-Eldien Omer

Keywords:

fire-retardant chemicals; laboratory made fire-retardant particle boards

Volume 31 (1980), Issue 7-8

Gluing time of veneers as function of the temperature change intensity in the joints

Authors:

Murat Backović

Keywords:

time of glue hardening; chemical and physical changes in joints; time of the loss of capacity of glue hardening; temperature flow in the joints; intensity of temperature changes in the joints; coefficient of temperature conductivity

Volume 30 (1979), Issue 9-10

Production, properties and potentials of wood-plastic composites application in Poland

Authors:

Maciej Lawniczak

Keywords:

wood modification; production and application of lignomer