Archive

Volume 75 (2024), Issue 1

Influence of Feed Speed and Cutting Depth During Planing on Surface Roughness of Fir, Poplar and Beech Wood

Authors:

Hasan Talić, Atif Hodžić

Keywords:

surface roughness; planing; feed speed; depth of cut; quality

Volume 73 (2022), Issue 3

Influence of Moisture Content on Cutting Parameters and Fracture Characteristics of Spruce and Oak Wood

Authors:

Luďka Hanincová, Jiří Procházka, Vít Novák, Zdeněk Kopecký

Keywords:

cutting force; feed force; fracture toughness; shear yield strength; moisture content

Volume 73 (2022), Issue 4

Impact of Circular Saw Blade Design on Forces During Cross-Cutting of Wood

Authors:

Zdeněk Kopecký, Vít Novák, Luďka Hlásková, Jakub Rak

Keywords:

saw blade; mitre saw; Kistler dynamometer; cross-cutting; force analysis; Ernst-Merchant model; statistical analysis

Volume 73 (2022), Issue 3

Feed Cutting Force Component in Up and Down Sawing of Pine

Authors:

Ľubomír Javorek, Richard Kminiak, Mária Vargovská, Etele Csanády, Szabolcs Németh

Keywords:

pine wood; sawing; feed speed; rake angle; teeth number; feed force

Volume 73 (2022), Issue 3

Analyses of Shear Angle in Orthogonal Cutting of Pine Wood

Authors:

Kazimierz A. Orlowski, Daniel Chuchala, Gerhard Sinn

Keywords:

shear angle; orthogonal cutting; chip compression ratio; pine wood; fracture toughness

Volume 71 (2020), Issue 1

Impact of Irregular Tooth Pitch of Circular Saw Blades on Power for Wood Cross-Cutting

Authors:

Jozef Krilek, Miroslava Ťavodová, Ján Kováč, Branislav Tichý

Keywords:

energy consumption; cross-cutting wood; circular saw blades; cutting power; irregular tooth pitch

Volume 67 (2016), Issue 1

Measurement of Wood Cutting Forces during Bandsawing Using Piezoelectric Dynamometer

Authors:

Payam Moradpour, Frieder Scholz, Kazem Doosthosseini, Asghar Tarmian

Keywords:

bandsawing; cutting forces; cutting speed; feed rate; piezoelectric dynamometer

Volume 67 (2016), Issue 3

Cutting Power during Milling of Thermally Modified Pine Wood

Authors:

Andrzej Krauss, Magdalena Piernik, Grzegorz Pinkowski

Keywords:

woodworking; thermal modification; cutting; lengthwise milling; power consumption; softwood; Pinus sylvestris L

Volume 67 (2016), Issue 3

Surface Roughness and Wettability Variation: The effect of Cutting Distance during Milling of Pinus Radiata Wood

Authors:

Aldo Rolleri, Francisco Burgos, Alfredo Aguilera

Keywords:

cutting distance; roughness; wettability; contact angle; wood; milling

Volume 67 (2016), Issue 1

Influence of Feed Speed on the Content of Fine Dust during Cutting of Two-Side-Laminated Particleboards

Authors:

Luďka Hlásková, Tomasz Rogoziński, Zdeněk Kopecký

Keywords:

wood dust; particle-size distribution; circular saw blade; two-side-laminated particleboard

Volume 66 (2015), Issue 1

Process Characteristics of Horizontal Log Band Saw in Cutting Frozen Beech

Authors:

Mikuláš Siklienka, Richard Kminiak, Filip Argay, Branimir Šafran, Igor Đukić

Keywords:

horizontal log band saw; band saw blade; stellite teeth; swaged teeth; cutting wedge wear; cutting power; surface quality

Volume 65 (2014), Issue 4

An Innovative Approach to the Forecasting of Energetic Effects While Wood Sawing

Authors:

Kazimierz A. Orlowski, Tomasz Ochrymiuk, Anthony Atkins

Keywords:

energetic effects; cutting power; wood sawing process; sawing machines; fracture mechanics; fracture toughness

Volume 65 (2014), Issue 1

A Method and Device for 3D Recognition of Cutting Edge Micro Geometry

Authors:

Bartosz Palubicki, Michal Szulc, Jakub Sandak, Gerhard Sinn, Kazimierz A. Orlowski

Keywords:

cutting tool wear; 3D scanner; micro geometry

Volume 62 (2011), Issue 4

Optimization of Cutting Process of Medium Density Fibreboards by the Abrasive Water-Jet

Authors:

Štefan Barcík, Monika Kvietková, Richard Kminiak, Patrik Aláč

Keywords:

feed rate; abrasive flow; water-jet cutting; sample thickness

Volume 62 (2011), Issue 3

Sawing Capacities in the Czech Republic

Authors:

Petr Pražan

Keywords:

Czech sawmilling; sawmill production; sawing capacities; log cutting technology

Volume 59 (2008), Issue 3

Effect of technological parameters and wood properties on cutting power in plane milling of juvenile poplar wood

Authors:

Štefan Barcík, Eva Pivolusková, Richard Kminiak

Keywords:

milling; poplar; cutting power; juvenile wood; fast-growing trees

Volume 57 (2006), Issue 1

Influence of specific pressure on cutting power and wood removal by disc sander

Authors:

Anton Samolej, Štefan Barcík

Keywords:

sand disc; specific pressure; wood removal; cutting power; grit size; grain direction

Volume 57 (2006), Issue 1

Investigations of cutting power versus clearance of a circular saw blade over the workpiece and feed speed

Authors:

Mikuláš Siklienka, Luboš Mišura

Keywords:

circular saw; power cutting; clearance; feed speed

Volume 56 (2005), Issue 4

Cut layer of a circular saw with radial run-out of cutting edges

Authors:

Roman Wasielewski, Tomasz Walkowiak

Keywords:

wood cutting; circular saw; radial run-out

Volume 56 (2005), Issue 4

Determination of cutting forces in cutting wood materials

Authors:

Zdeněk Kopecký, Miroslav Rousek

Keywords:

measuring stand; wood agglomerated materials; cutting; circular saw blade

Volume 54 (2003), Issue 3

Circular saw mechanics, Part II: Oak sawing - influence of saw blade position

Authors:

Vlado Goglia, Stjepan Risović, Ružica Beljo Lučić, Igor Đukić

Keywords:

circular saw; cutting forces; energy standards

Volume 53 (2002), Issue 2

Circular saw mechanics, Part I: Determination of the saw blade position

Authors:

Vlado Goglia, Stjepan Risović, Ružica Beljo Lučić, Igor Đukić

Keywords:

circular saw; cutting quality; energy standards

Volume 49 (1998), Issue 4

Production of wooden plates with a straight slide cutting

Authors:

Otto Leible

Keywords:

Volume 46 (1995), Issue 1

The influence of band saw strain force on idling power

Authors:

Ružica Beljo Lučić, Vlado Goglia

Keywords:

band saw; strain force; cutting speed; idling power

Volume 45 (1994), Issue 3

A contribution to the study of cutting resistance of milled beech

Authors:

Stjepan Risović

Keywords:

woodworking; beech; milling; cutting resistance

Volume 44 (1993), Issue 4

A contribution to the study of cutting resistance with machining of fir

Authors:

Stjepan Risović

Keywords:

wood maschining; fir; milling; cutting resistance

Volume 43 (1992), Issue 4

Quantity yield as a criterion for computer determination of the method of furniture parts production from boards

Authors:

Krešimir Babunović

Keywords:

elements production; cutting of boards; optimization; quantity yield

Volume 43 (1992), Issue 2

Research in the application of front milling to the processing of plain surfaces

Authors:

Vlado Goglia, Antun Šoštarić

Keywords:

front milling; plane surface machining; specific cutting energy; roughness

Volume 43 (1992), Issue 2

Lumber defect detection as an element of automated elements production

Authors:

Krešimir Babunović

Keywords:

lumber defect detection; board cutting; element production

Volume 41 (1990), Issue 11-12

Optimization of furniture parts production based on computer program simulation

Authors:

Krešimir Babunović

Keywords:

optimization; cutting of boards; furniture parts production; simulation

Volume 40 (1989), Issue 3-4

Application of time study results at computer-aided logging

Authors:

Ivan Martinić

Keywords:

Cutting and primary wood conversion; Time study; System of technical norms; Computer support

Volume 40 (1989), Issue 7-8

Producing veneer of oak (quercus robur erch) by pyramidal cutting

Authors:

Franjo Penzar

Keywords:

oak wood; pyramidal cut; cutting with standard equipment; peeling-machine.

Volume 38 (1987), Issue 11-12

Optimization of operation mode on wood working machines with a constant main cutting speed

Authors:

Vlado Goglia

Keywords:

cutting process; mathematical model of function criterion of optimization

Volume 37 (1986), Issue 11-12

Primjena laserskog razdvajanja u tehnologiji obrade masivnog drva

Authors:

Đorđe Butković, Krešimir Babunović

Keywords:

laser cutting; feed speed of boards

Volume 33 (1982), Issue 9-10

Solid wood cutting-out optimization

Authors:

Željko Pizent

Keywords:

cutting-out optimization; solid wood cutting-out capacity

Influence of Feed Speed and Cutting Depth During Planing on Surface Roughness of Fir, Poplar and Beech Wood

Influence of Moisture Content on Cutting Parameters and Fracture Characteristics of Spruce and Oak Wood

Impact of Circular Saw Blade Design on Forces During Cross-Cutting of Wood

Feed Cutting Force Component in Up and Down Sawing of Pine

Analyses of Shear Angle in Orthogonal Cutting of Pine Wood

Impact of Irregular Tooth Pitch of Circular Saw Blades on Power for Wood Cross-Cutting

Measurement of Wood Cutting Forces during Bandsawing Using Piezoelectric Dynamometer

Cutting Power during Milling of Thermally Modified Pine Wood

Surface Roughness and Wettability Variation: The effect of Cutting Distance during Milling of Pinus Radiata Wood

Influence of Feed Speed on the Content of Fine Dust during Cutting of Two-Side-Laminated Particleboards

Process Characteristics of Horizontal Log Band Saw in Cutting Frozen Beech

An Innovative Approach to the Forecasting of Energetic Effects While Wood Sawing

A Method and Device for 3D Recognition of Cutting Edge Micro Geometry

Optimization of Cutting Process of Medium Density Fibreboards by the Abrasive Water-Jet

Sawing Capacities in the Czech Republic

Effect of technological parameters and wood properties on cutting power in plane milling of juvenile poplar wood

Influence of specific pressure on cutting power and wood removal by disc sander

Investigations of cutting power versus clearance of a circular saw blade over the workpiece and feed speed

Cut layer of a circular saw with radial run-out of cutting edges

Determination of cutting forces in cutting wood materials

Circular saw mechanics, Part II: Oak sawing - influence of saw blade position

Circular saw mechanics, Part I: Determination of the saw blade position

Production of wooden plates with a straight slide cutting

The influence of band saw strain force on idling power

A contribution to the study of cutting resistance of milled beech

A contribution to the study of cutting resistance with machining of fir

Quantity yield as a criterion for computer determination of the method of furniture parts production from boards

Research in the application of front milling to the processing of plain surfaces

Lumber defect detection as an element of automated elements production

Optimization of furniture parts production based on computer program simulation

Application of time study results at computer-aided logging

Producing veneer of oak (quercus robur erch) by pyramidal cutting

Optimization of operation mode on wood working machines with a constant main cutting speed

Primjena laserskog razdvajanja u tehnologiji obrade masivnog drva

Solid wood cutting-out optimization

Publisher