Archive

Volume 74 (2023), Issue 3

Volume 72 (2021), Issue 1

An Assessment of Environmental Impact on Glued Wood Building Elements

Authors:

Darius Albrektas, Ernestas Ivanauskas

Keywords:

glued wood (glulam); laminated veneer lumber; modulus of elasticity; coeffi cient of damping; wood defects

Volume 70 (2019), Issue 1

Comparison of Surface Quality and Tool-Life of Glulam Window Elements after Planing

Authors:

Michal Dobrzynski, Kazimierz A. Orlowski, Michal Biskup

Keywords:

planing process; pine wood; window frame; surface quality; 2D/3D surface texture

Volume 67 (2016), Issue 2

Contribution to Research on Certain Production Costs by Investing into Computer Aided Technology of Production of Wooden Elements with Pre-Planing of Sawn Wood

Authors:

Josip Faletar, Andreja Čunčić Zorić, Zlatko Budrović, Tomislav Pađen

Keywords:

wood elements; planing; classic secondary sawmill; computer aided secondary sawmill; production costs

Volume 66 (2015), Issue 1

Mineralized Wood Particle Reinforced Concrete as Stiffening Elements with Reduced Density

Authors:

Fabian Wulf, Karsten Schulz, Lukas Brösel, Alexander Pfriem

Keywords:

wood concrete compound; mineralization; compressive strength

Volume 66 (2015), Issue 4

Application of Reduced Stiffness of Complex Laminate in Finite Elements for Chair Analysis

Authors:

Biserka Nestorović, Ivica Grbac, Predrag Nestorović, Jelena Milošević

Keywords:

reduced stiffness; finite elements; composite; material constants; shell; chair

Volume 62 (2011), Issue 3

Determining the Characteristics of Composite Structure Laminae by Optical 3D Measurement of Deformation with Numerical Analysis

Authors:

Biserka Nestorović, Dušan Skakić, Ivica Grbac

Keywords:

optical 3D measurement; chair; shell; composite; material constants; stress; beech wood; finite elements

Volume 62 (2011), Issue 1

Influence of Thermal Modification of Beech on the Strength of Longitudinally Connected Turned Elements by Rotational Welding Method

Authors:

Ivica Župčić, Marko Mijaković, Ivica Grbac

Keywords:

beech; welding of solid and modified wood; strength of welded joints; longitudinal bonding

Volume 61 (2010), Issue 3

Glued Laminated Timber in Architecture

Authors:

Manja Kitek-Kuzman, Leon Oblak, Srečko Vratuša

Keywords:

wood structure; glued laminated timber (glulam); structural elements; composite

Volume 59 (2008), Issue 2

Dimensional stability of heat treated wood floorings

Authors:

Vjekoslav Živković, Ivan Prša, Hrvoje Turkulin, Tomislav Sinković, Vlatka Jirouš-Rajković

Keywords:

heat treated wood; parquet elements; dimensional stability; beech; ash

Volume 57 (2006), Issue 3

Investigations of gluing quality of laminated window profiles

Authors:

Štefo Šorn, Andrija Bogner

Keywords:

composite material; laminated elements; strength of gluing; length joint; widening; quality of laminated; elements

Volume 53 (2002), Issue 3

Variable elements of plywood water resistance

Authors:

Jaroslav Kljak, Mladen Brezović, Vladimir Jambreković

Keywords:

veneer plywood; bonding quality; water resistance

Volume 53 (2002), Issue 4

Influence of juvenile spruce-wood on longitudinal deformations of laminated wood elements

Authors:

Janez Čadež, Jože Resnik, Katarina Košmelj

Keywords:

juvenile and adult wood; spruce wood; PVA adhesive; gluing; bowing

Volume 51 (2000), Issue 4

Stress in circular saw blade by finite element method

Authors:

Stjepan Risović

Keywords:

circular saw; saw blade stress; method of finite elements; centrifugal force

Volume 49 (1998), Issue 2

Manufacturing costs of the wooden components in three diferent rough mills

Authors:

Jurica Butković

Keywords:

wooden components (elements); classic rough mill; rough mill controlled by a computer; production cost (expenditure)

Volume 46 (1995), Issue 1

Some structural characteristics of ashwood (Fraxinus angustifolia, Vahl.) from the Lipovljani region in Croatia

Authors:

Radovan Despot, Božidar Petrić, Jelena Trajković

Keywords:

variations of structural elements; juvenile wood; adult wood; ashwood

Volume 43 (1992), Issue 4

Quantity yield as a criterion for computer determination of the method of furniture parts production from boards

Authors:

Krešimir Babunović

Keywords:

elements production; cutting of boards; optimization; quantity yield

Volume 43 (1992), Issue 2

Lumber defect detection as an element of automated elements production

Authors:

Krešimir Babunović

Keywords:

lumber defect detection; board cutting; element production

Volume 42 (1991), Issue 3-4

The yield of sawlogs with the special view upon certain elements of sawing quality

Authors:

Ružica Beljo Lučić

Keywords:

yield of sawlogs; accuracy of sawing; roughness of the sawn surface

Volume 42 (1991), Issue 3-4

Architectonic and technological aspects of cyclic windows, doors and glass walls

Authors:

Mirko Gornik, Jure Popović

Keywords:

facade elements; cyclic openings; cyclic windows

Volume 41 (1990), Issue 11-12

Researches on UV ozonization protection of elements made of wood and other wood components used in interiors

Authors:

Mirko Gornik

Keywords:

ozonization; UV rays; wood protection; bio-corrosion

Volume 35 (1984), Issue 9-10

Development of sawmill wood manufacture

Authors:

Branko Guštin

Keywords:

development of sawmill manufacture; specified-purpose production of elements

Volume 35 (1984), Issue 11-12

Consumption of energy at kiln drying of lumber and potential solutions for its saving

Authors:

Mirko Ilić

Keywords:

kiln drying-consumption of thermal and electrical energy; drying rough dimension stock; drying sawn boards; manufacture of elements

Volume 32 (1981), Issue 11-12

Some structural characteristics of adult homegrown oakwood (quercus robur, l.)

Authors:

Božidar Petrić, Velimir Šćukanec

Keywords:

characteristics of oakwood structural elements; volume participation of structural elements

Volume 31 (1980), Issue 3-4

Some structural characteristics of juvenile and mature oakwood (Quercus robur L.)

Authors:

Božidar Petrić, Velimir Šćukanec

Keywords:

juvenile wood; variations of structural elements; limit of juvenile oakwood

Volume 31 (1980), Issue 9-10

Some structural characteristics of home-grown beechwood (Fagus silvatica, L.)

Authors:

Božidar Petrić, Velimir Šćukanec

Keywords:

participation and characteristics of beechwood structural elements

Volume 30 (1979), Issue 1-2

Calculation of furniture strength (1)

Authors:

Natalija Štorga, Miljenko Jurjević, Radoslav Jeršić

Keywords:

analysis of construction of furniture; calculation of joint strength; load and strength of panel elements of furniture

Volume 30 (1979), Issue 3

Calculation of furniture strength (2)

Authors:

Natalija Štorga, Miljenko Jurjević, Radoslav Jeršić

Keywords:

analysis of construction of furniture; calculation of joint strength; load and strength of panel elements of furniture

Volume 28 (1977), Issue 11-12

Mehanizacija pilana za tvrdo drvo u SFRJ

Authors:

Marko Gregić

Keywords:

hardwood sawmill mechanization; sawmill capacity; classic sawmill technology; technology of wooden elements

Volume 27 (1976), Issue 7-8

Theory elements of kibernetic system in production management

Authors:

Zdravko Fučkar

Keywords:

system market-production; kibernetic management of production system; system theory elements

Volume 26 (1975), Issue 3-4

Application of insulation materials and insulating efficiency of the prefabricated elements for wooden houses

Authors:

Dragomir Ostojić

Keywords:

Analysis of the Effect of Gypsum-Based Fire Protection Cover on Charring of Wooden Bearing Elements

An Assessment of Environmental Impact on Glued Wood Building Elements

Comparison of Surface Quality and Tool-Life of Glulam Window Elements after Planing

Contribution to Research on Certain Production Costs by Investing into Computer Aided Technology of Production of Wooden Elements with Pre-Planing of Sawn Wood

Mineralized Wood Particle Reinforced Concrete as Stiffening Elements with Reduced Density

Application of Reduced Stiffness of Complex Laminate in Finite Elements for Chair Analysis

Determining the Characteristics of Composite Structure Laminae by Optical 3D Measurement of Deformation with Numerical Analysis

Influence of Thermal Modification of Beech on the Strength of Longitudinally Connected Turned Elements by Rotational Welding Method

Glued Laminated Timber in Architecture

Dimensional stability of heat treated wood floorings

Investigations of gluing quality of laminated window profiles

Variable elements of plywood water resistance

Influence of juvenile spruce-wood on longitudinal deformations of laminated wood elements

Stress in circular saw blade by finite element method

Manufacturing costs of the wooden components in three diferent rough mills

Some structural characteristics of ashwood (Fraxinus angustifolia, Vahl.) from the Lipovljani region in Croatia

Quantity yield as a criterion for computer determination of the method of furniture parts production from boards

Lumber defect detection as an element of automated elements production

The yield of sawlogs with the special view upon certain elements of sawing quality

Architectonic and technological aspects of cyclic windows, doors and glass walls

Researches on UV ozonization protection of elements made of wood and other wood components used in interiors

Development of sawmill wood manufacture

Consumption of energy at kiln drying of lumber and potential solutions for its saving

Some structural characteristics of adult homegrown oakwood (quercus robur, l.)

Some structural characteristics of juvenile and mature oakwood (Quercus robur L.)

Some structural characteristics of home-grown beechwood (Fagus silvatica, L.)

Calculation of furniture strength (1)

Calculation of furniture strength (2)

Mehanizacija pilana za tvrdo drvo u SFRJ

Theory elements of kibernetic system in production management

Application of insulation materials and insulating efficiency of the prefabricated elements for wooden houses

Publisher