Archive

Hasan Talić, Atif Hodžić

surface roughness; planing; feed speed; depth of cut; quality

Volume 75 (2024), Issue 3

Determination of Fire Resistance, Mechanical Property and Physical Stability of Boron Phosphate Containing Wood Polymer Composites

Mehmet Yüksel, Elif Vargün, Damla Karadayı, Aysen Yılmaz

boron phosphate; wood polymer composite; flame-retardant; polydiphenylmethane- 4,4’-diisocyanate (PMDI) compatibilizer

Volume 74 (2023), Issue 4

Comparison of Reaction Wood and Normal Wood of Some Commercial Tree Species

Sevinç Kaz, Saim Ateş, Tuba Külçe

pine; fir; oak; beech; anatomical and chemical structure

Volume 74 (2023), Issue 3

Analysis of the Effect of Gypsum-Based Fire Protection Cover on Charring of Wooden Bearing Elements

Marie Rusinová, Miloš Lavický, Miloš Kalousek, Martin Sedlmajer

fire resistance; ignition temperature; gypsum plasterboard; gypsum fibreboard; fire test

Volume 73 (2022), Issue 3

Influence of Moisture Content on Cutting Parameters and Fracture Characteristics of Spruce and Oak Wood

Luďka Hanincová, Jiří Procházka, Vít Novák, Zdeněk Kopecký

cutting force; feed force; fracture toughness; shear yield strength; moisture content

Volume 72 (2021), Issue 2

MOR and MOE of Serbian Spruce (Picea omorika Pančić/Purkyně) Wood from Natural Stands

Danijela Petrović, Vojislav Dukić, Zdravko Popović, Nebojša Todorović

Picea omorika; modulus of rupture; modulus of elasticity; natural stands

Volume 72 (2021), Issue 3

First and Second Phase of Human Centered Design Method in Design of Exterior Seating Furniture

Sarah Szökeová, Lukáš Fictum, Milan Šimek, Alena Sobotkova, Marek Hrabec, Danijela Domljan

exterior furniture; human centered design; wood; user research; market research; furniture design

Volume 72 (2021), Issue 4

Effect of Artificial Ageing on Adhesive Bonds from Heat Treated Spruce

Mirko Kariž, Manja Kitek-Kuzman, Milan Šernek

heat treated spruce; adhesive bond; artificial ageing; shear strength; delamination; colour change

Volume 72 (2021), Issue 2

Installation of Test Setup and Measurement Procedures in Fir Wood Hydraulic Conductance Measurement

Suheyla Esin Koksal, Gokhan Gunduz, Menderes Kalkat

hydraulic conductance; test setup; fir wood

Volume 71 (2020), Issue 1

Effect of Water Repellents on Hygroscopicity and Dimensional Stability of Densified Fir and Aspen Woods

Huseyin Pelit, Fatih Emiroglu

densification; dimensional stability; hygroscopicity; impregnation; water repellents

Volume 70 (2019), Issue 4

Surface Roughness and Wettability of Surface Densified Heat-Treated Norway Spruce (Picea abies L. Karst.)

Nadir Ayrilmis, Mirko Kariž, Jin Heon Kwon, Manja Kitek-Kuzman

heat-treatment; wood; surface roughness; wettability; densification

Volume 69 (2018), Issue 4

Comparison of VOC Emissions from Natural Wood and Heat Treated Wood

Petr Čech

VOC emissions; spruce; poplar; heat-treated wood; gas chromatography

Volume 69 (2018), Issue 3

Effect of Thermal Treatment on Combustion Process of Spruce Wood (Picea abies)

Peter Rantuch, Jozef Martinka, Igor Wachter

torrefaction; Picea abies wood; heat flux; heat release

Volume 69 (2018), Issue 2

Dimensional Stability and Water Absorption of Spruce Wood (Picea Abies Karst.) Impregnated and Coated with Polyurethane and Acrylic Coatings

Konstantin Bahcevandziev, Nikola Mihajlovski

impregnacija; premazi; smrekovina; poboljšanje dimenzijske stabilnosti drva

Volume 69 (2018), Issue 2

Formaldehyde Release from Plywood Manufactured with Two Types of Urea Formaldehyde Resins after Fire Retardant Treatment of Veneers

Aydin Demir, Ismail Aydin, Hasan Ozturk

formaldehyde release; plywood; veneer; fire retardant; urea formaldehyde

Volume 68 (2017), Issue 1

Determination of Screw Withdrawal Resistance of Some Heat-Treated Wood Species

Osman Perçin, Şekip Şadiye Yasar, Mustafa Altunok, Oğuzhan Uzun

heat treatment; black pine; hornbeam; Uludağ fir; screw withdrawal resistance

Volume 68 (2017), Issue 4

Cone Morphology as a Diagnostic Attribute of Resonant Properties of Standing Spruce Wood

Vladimir Fedyukov, Ekaterina Saldayeva, Maria Chernovа, Vasilii Chernov

sonorous spruce; cone biomorphology; wood macrostructure; density; sound velocity; acoustic constant; dendroacoustic indices identification

Volume 68 (2017), Issue 2

An Evaluation of Modulus of Elasticity, Dimensional Stability and Bonding Strength of Bonded Heat-Treated Wood

Darius Albrektas, Povilas Navickas

heat-treated wood; pine; spruce;mechanical properties; nondestructive evaluation method; three point static bending; bonding

Volume 68 (2017), Issue 1

Modelling of Drying Curves of Spruce, Beech, Willow and Alder Particles

Krzysztof Górnicki, Agnieszka Kaleta, Andrzej Bryś, Radosław Winiczenko

wood species; particles; drying kinetics; drying temperature; modelling

Volume 67 (2016), Issue 3

Biophysical Bases for Vibroacoustic Diagnostics of Standing Sounding Wood

Vladimir Fedyukov, Tatiana Alexandrovna Makarieva, Ekaterina Saldayeva, Ekaterina Mikhailovna Tsvetkova

spruce tree; sounding wood; shock device; acoustic response; impedance; vibration absorbing; frequency; histogram

Volume 66 (2015), Issue 4

Water Uptake of Thermally Modified Norway Spruce

Mojca Zlahtic, Nejc Thaler, Miha Humar

load cell; Picea abies; tensiometer; thermal modification; water uptake; field testing

Volume 66 (2015), Issue 2

Pyrolysis of Firwood (Abies bornmülleriana Mattf.) Sawdust: Characterization of Bio-Oil and Bio-Char

Günay Özbay

Bio-oil; Fir wood; GC/MS; 1H-NMR; Pyrolysis

Volume 65 (2014), Issue 4

Effect of Temperature on Radial Growth of Beech and Pine Saplings in the First and Second Year of the Experiment: a Comparison

Jožica Gričar

Fagus sylvatica; Pinus sylvestris; xylem increment; juvenile period; temperature

Volume 65 (2014), Issue 3

Variation in Mechanical Properties within Individual Annual Rings in the Resonance Spruce Wood (Picea abies (L.) Karst.)

Waldemar Moliński, Edward Roszyk, Jakub Puszyński

resonance wood; spruce wood; specific modulus of elasticity; specific tensile strength; MFA

Volume 64 (2013), Issue 2

Influence of Norway Spruce and European Larch Heartwood Ring-Width on Extractive Content and Durability

Miha Humar

Picea abies; Larix decidua; wood decay fungi; extraction; performance; laboratory tests; field testing

Volume 63 (2012), Issue 3

Determination of Fire and Burning Properties of Spruce Wood

Martin Zachar, Iveta Mitterová, Qiang Xu, Andrea Majlingová, Jin Cong, Štefan Galla

spruce; fire properties; flash-ignition temperature; spontaneous ignition temperature; burning rate; ignitability

Volume 63 (2012), Issue 2

Shrinkage of Grand Fir Wood and its Variability within the Stem

Jiří Lukášek, Aleš Zeidler, Štefan Barcík

Grand fir (Abies grandis /Douglas/ Lindl.); shrinkage; density; introduced species; variability

Volume 63 (2012), Issue 1

Compression Strength of Fir and Beech Wood Modified by Citric Acid

Bogoslav Šefc, Jelena Trajković, Tomislav Sinković, Marin Hasan, Iva Ištok

Fir wood (Abies alba Mill.); beech wood (Fagus sylvatica L.); chemical modification; citric acid (CA); compression strength

Volume 62 (2011), Issue 4

Alteration of Water Absorption Coefficient of Spruce (Picea abies (L.) Karst.) due to Thermal Modification

Alexander Pfriem

anisotropy; thermal modification; water absorption coefficient

Volume 62 (2011), Issue 1

Influence of Initial Wood Quality and Drying Process on Utilization Grades of Sawn Spruce Timber

Aleš Straže, Željko Gorišek

wood; drying; drying quality; grading

Volume 61 (2010), Issue 4

Influence of Polyethylene and Oxidized Polyethylene Wax Emulsions on Leaching Dynamics of Boric Acid from Impregnated Spruce Wood

Boštjan Lesar, Polonca Kralj, Miha Humar

boric acid; leaching; wax emulsion; Norway spruce; wood preservation

Volume 60 (2009), Issue 2

Fire retardants for wood

Vlatka Jirouš-Rajković, Josip Miklečić

wood; combustion of wood; fire retardants; fire retardant coatings; chemical impregnation by pressure-treating

Volume 60 (2009), Issue 1

Dimensional stability of wood modified by citric acid using different catalysts

Bogoslav Šefc, Jelena Trajković, Marin Hasan, Drago Katović, Sandra Bischof Vukušić, Martina Frančić

dimensional stability of wood; beech wood; fir wood; chemical modification; citric acid; NaH2PO2; NaH2PO4

Volume 59 (2008), Issue 4

Hollow wooden post and its interaction with metal structural members

Juraj Detvaj, Filip Argay, Daniel Ruman

wooden post; bearing members; structural members; spruce timber

Volume 59 (2008), Issue 1

Selected properties of spruce dust generated from sanding operations

Alena Očkajová, Annamária Beljaková, Jana Luptáková

sanding; spruce dust; granularity; bulk properties

Volume 57 (2006), Issue 2

A simple method for determination of kinetics of radial, tangential and surface swelling of wood

Rastislav Solár, Miroslav Mamon, Stanislav Kurjatko, Richard Lang, Vladimír Vacek

beech-wood; spruce-wood; tension and bio-degraded wood; kinetics of swelling; relative rate constants

Volume 55 (2004), Issue 3

Possible use of Euclid`s second theorem to determine the growth ring characteristics

Ilker Usta, Radovan Despot, Marin Hasan

Euclid's second theorem; growth ring characteristics; Sytka spruce; earlywood; latewood

Volume 54 (2003), Issue 2

Influence of coating and colour on bacterial colonisation of fir-wood L-joints

Radovan Despot, Jelena Trajković, Bogoslav Šefc, Marin Hasan

Fir-wood; L-joints; high build alkyd paint; medium build alkyd stain; bacterial activity

Volume 54 (2003), Issue 1

Comparative test of mattresses according to new and old Croatian standards

Zoran Savić, Slaven Fiala, Zoran Vlaović, Želimir Ivelić, Ivica Grbac

quality testing; mattress; hardness; firmness and height loss

Volume 53 (2002), Issue 4

EPR spin trapping – A new technique for observation and characterisation of free radicals during photodegradation of wood

Miha Humar, Marjeta Šentjurc, Marko Petrič

EPR spin trapping; DEPMPO; photodegradation of spruce wood; copper

Volume 53 (2002), Issue 4

Influence of juvenile spruce-wood on longitudinal deformations of laminated wood elements

Janez Čadež, Jože Resnik, Katarina Košmelj

juvenile and adult wood; spruce wood; PVA adhesive; gluing; bowing

Volume 51 (2000), Issue 4

Adhesion of water-borne acrylic and hybrid paint on wood treated with primers

Hrvoje Turkulin, Klaus Richter, Jürgen Sell

spruce; durability; adhesion; primers; water-borne paints; hybrid paints; SEM microscopy

Volume 51 (2000), Issue 3

Contribution to the research of the bark properties of several wood species

Stanislav Bađun

bark; density; hardness; beech; hornbeam; oak; ash; poplar; fir

Volume 51 (2000), Issue 1

The influence of the structure of three-layer particle boards on the thickness and density of surface layer

Sergej Medved, Vladimir Jambreković

particleboard; spruce; beech; oak; poplar; surface layer; core layer; particle geometry; vertical density distribution; layer thickness; layer density

Volume 50 (1999), Issue 2

Croatian wood processing firms and water pollution

Leon Oblak, Denis Jelačić, Krešimir Greger

waste waters; purified waste waters; environmental protection; water protection

Volume 49 (1998), Issue 3

Mechanism of infection of fir wood joinery; Part 2: Sequence and intensity of attack of microorganisms

Radovan Despot

Fir-wood joinery; L-joints; preservation; bacterial and fungal colonisation; biodeterioration; wood decay

Volume 49 (1998), Issue 2

Mechanism of infection of fir wood joinery; Part 1: Exposure conditions, moisture content and permeability

Radovan Despot

Fir-wood; L-joints; exterior joinery; moisture content; permeability; preservation

Volume 49 (1998), Issue 1

Comparison of the yield for three methods of fir/spruce logs sawing

Jurica Butković

value yield; radial sawn timber; tangential sawn timber

Volume 49 (1998), Issue 4

Distribution of properties in use for oak, beech and fir-wood in a radial direction

Slavko Govorčin, Tomislav Sinković, Jelena Trajković

beech (Fagus silvatica L.); oak (Quercus robur L.); fir (Abies alba Mill.); density of oven dry wood; radial and tangential shrinkage; bending strength; compression strength parallel to the grain

Volume 48 (1997), Issue 2

Production possibilities for structurally protected plywood by chemical fire-retardants

Mladen Brezović

structural protection; fire-retardant chemicals; physical and mechanical properties; fire-retardance; fire-tube method

Volume 47 (1996), Issue 1

Development of moisture content distribution in sapwood and heartwood during initial stages of drying

Georg Bohner, Markus Sacker

Spruce; drying; heartwood; sapwood

Volume 46 (1995), Issue 2

Physical properties of juvenile fir-wood [Abies alba Mill.) from Gorski Kotar

Tomislav Sinković

fir-wood (Abies alba Mill.); juvenile wood; ring width; density; shrinkage

Volume 46 (1995), Issue 3

Mechanical properties of juvenile wood of fir-wood (Abies alba Mill.) from Gorski Kotar

Tomislav Sinković

fir-wood (Abies alba Mill.); juvenile wood; bending strength; compression strength

Volume 45 (1994), Issue 4

The influence of microwave drying on the permeability of fir-wood

Jelena Trajković

fir sapwood; permeability; microwave drying

Volume 44 (1993), Issue 1

Improvement of fir-wood permeability caused by bacteria action

Radovan Despot

Firwood; permeability; anaerobic bacteria

Volume 44 (1993), Issue 3

Influence of the sawing method on yields in fir/spruce log milling

Jurica Butković

sawing methods; fir/spruce; yield

Volume 44 (1993), Issue 4

A contribution to the study of cutting resistance with machining of fir

Stjepan Risović

wood maschining; fir; milling; cutting resistance

Volume 43 (1992), Issue 3

Gluing of fir with lignin-based adhesives using the conventional and the RF-method

Andrija Bogner, Vlatka Jirouš-Rajković, Vladimir Sertić, Hrvoje Turkulin

gluing of fir; lignin based adhesives; intensification of adhesive; curing by conduction and RF energy

Volume 42 (1991), Issue 1-2

Some physical properties of fir-wood from Gorski kotar

Tomislav Sinković

fir-wood; density of oven dry wood; fiber saturation point; volumetric shrinkage; moisture content after felling

Volume 41 (1990), Issue 9-10

Research on change of fire resistance of steel galvanized metal sheet doors after being veneered on both surfaces

Mirko Gornik

fire resistance; veneer paneling; glued joints

Volume 41 (1990), Issue 3-4

Variation of fir wood structure from region of Gorski kotar

Božidar Petrić, Jelena Trajković, Radovan Despot

fir wood; variation of growth ring widths tracheid dimensions; volume percentages of tracheids and wood rays

Volume 41 (1990), Issue 3-4

Effect of height of fir sample on shrinkage progression and on hygroscopic line (the fiber saturation point))

Izet Horman

fir; shrinkage of wood; hygroscopic line (the fiber saturation point)

Volume 40 (1989), Issue 11-12

Protection of fir wood joinery by double vacuum method

Božidar Petrić, Velimir Šćukanec, Radovan Despot, Jelena Trajković

Chemical protection of fir wood; double vacuum method; penetration and apsorption of wood preservative

Volume 39 (1988), Issue 9-10

Shrinkage and overmeasure of fir-wood boards

Mirko Ilić

fir-wood; shrinkage of lab tests; shrinkage of wood assortments; required overmeasure

Volume 39 (1988), Issue 7-8

Fire-resistant and smoke-impassable wood door

Božidar Markulin

fire-resistant and smoke-impassable wood door; fire insurance

Volume 39 (1988), Issue 5-6

Chemical and anatomical properties and possibility of firwood sawmill residue utilization for high-yield chemimechanical pulps production

Tatjana Stevanović Janežić, Biljana Bujanović

firwood sawmill residue; Abies pectinata; chemical composition; anatomical properties; softwood chips; high-yield pulps; chemimechanical pulping; chemithermomechanical pulping; softwood sulfonation; quuinomethide; sulphonated lignin; better qualities CMP/CTMP

Volume 38 (1987), Issue 3-4

Bonding of beech and fir wood by activating the joint surface with natrium hydroxide applying the lignin based fillers

Andrija Bogner, Hrvoje Turkulin, Vladimir Sertić, Boris Ljuljka

activation of wood surface with natrium hydroxide; lignin based filler; bonding of solid beech and fir

Volume 38 (1987), Issue 7-8

International market for timber, pulp and paper in the first half of 1987

Demand and Supply of Wood Products; Lumber; Wooden Board Market; Pulp and Paper

Volume 37 (1986), Issue 1-2

Saturation points of the bark fiber of beech, hornbeam, oak, ash, poplar and fir

Stanislav Bađun

bark; hygroscopic features

Volume 37 (1986), Issue 1-2

Extraction dynamics of extractive substances from wood by using a mixture of benzene and methanol

Milan Kaić

extraction; extractive substances; fir; juniper; oak; poplar; locust

Volume 37 (1986), Issue 3-4

Some possibilities of manufacturing fireproof plywood

Stjepan Petrović, Josip Klekar

fireproof plywood; structural protection; phenol-formaldehyde glue

Volume 37 (1986), Issue 3-4

Preliminary investigation of fire-retardant treatments for flakeboards

Theodore Laufenberg, Susan Le Van, Vladimir Bruči

fire protective chemicals; oxygen index

Volume 37 (1986), Issue 9-10

International timber market in the first six months 1986

demand and supply of wood products; prospects in the international trade; sawngoods; boards; woodpulp and paper

Volume 36 (1985), Issue 1-2

Fire prevention in forestry and timber industry

Salah-Eldien Omer

Volume 36 (1985), Issue 5-6

Production of fire retardant particleboards

Salah-Eldien Omer

fire retardant particleboard; physicaI and mechanical properties; fire resistance

Volume 36 (1985), Issue 5-6

Fire retardant chemicals for increase of fire resistance of high density fibreboards manufactured by dry process and mdf boards

Vladimir Bruči, Marina Tatalović

fire retardant agent; flame spread index

Volume 35 (1984), Issue 11-12

Determination of a rate of heat release from wood products ano structural material under exposure to fire

Vladimir Bruči

rate of heat release; reaction to fire; ignitability; flame spread; release of heat

Volume 35 (1984), Issue 7-8

Effect of drying method on shrinkage of spruce sawn boards

Martin Trnka

shrinkage; seasoning and kiln drying

Volume 34 (1983), Issue 9-10

International wood products market in the first half-year 1983

supply and demand of wood products; prospects in the international trade; sawn timber; wooden boards; pulp and paper

Volume 33 (1982), Issue 9-10

International timber and woodpulp market in first six months 1982.

offer and demand of wood products; sawn timber; international trade; wooden boards; woodpulp and paper

Volume 33 (1982), Issue 3-4

Laboratory tests of possibilities to manufacture fire-retardant particle boards

Salah-Eldien Omer

fire-retardant chemicals; laboratory made fire-retardant particle boards

Volume 33 (1982), Issue 3-4

Fire prevention - stationary fire protection systems based on carbon dioxide (CO2)

Željko Đidara

fire alarms; CO2 nozzels; alarm contrivance; »time delay« device

Volume 33 (1982), Issue 5-6

Quality of sawing fir logs on frame-saws

Đorđe Butković

quality of sawing; frame; saw

Volume 32 (1981), Issue 3

Dizajn u industriji namještaja

Dragan Roksandić

razvoj industrije namještaja; unapređivanje i afirmiranje dizajna u industriji namještaja

Volume 32 (1981), Issue 5-6

Fire-prevention in woodworking industry fixed stable sprinkler devices for extinguishing by water

Željko Đidara

automatic sprinkler device for extinguishing by water; sprinkler heads; alarm valve; pump station

Volume 32 (1981), Issue 7-8

Comparative testing of firmness and durability of glued joints in products of building trade

Ivica Grbac, Zlatko Purgar, Boris Ljuljka, Andrija Bogner

firmness and durability of glued joints; surface finishing; breaking strength; accuracy of finishing; exposure to weather conditions

Volume 31 (1980), Issue 5-6

Influence of sawing technology on utilization of firwood logs

Đorđe Butković

firwood utilization; experimental sawing; simulating sawing

Volume 30 (1979), Issue 7-8

Investigations of quantitative and qualitative utilization in sawing firwood sprucewood logs

Ramiz Zubčević

sawn conifiers; quantitative and qualitative utilization

Volume 30 (1979), Issue 11-12

Manufacture and application of cementbonded particleboards

Stjepan Petrović

cementbonded particleboards; Portland Cement; elastic-mechanical properties; high fire-resistant material

Volume 29 (1978), Issue 1-2

Quality factors of armchairs, sofas and seating groups

Boris Ljuljka, Božidar Sinković

quality factors; armchairs; sofas and seating groups; durability and firmness; construction of seats

Volume 29 (1978), Issue 1-2

Smelting adhesives for gluing edges (1)

Željko Šonje

smelting adhesives; temperature of smelting; time of smelting; capability of flowing; firmness of glowing; methods of testing shearing strength

Volume 29 (1978), Issue 9

Quality factors of chairs

Radoslav Jeršić, Božidar Sinković

chair durability and firmness; chair quality examination; chair construction as a quality factor; critical chair construction points

Volume 29 (1978), Issue 10

International timber market in the first six months 1978

Volume 28 (1977), Issue 5-6

Comparative wood quality appreciation

Stanislav Bađun

sprucewood; pinewood; application properties comparison

Volume 27 (1976), Issue 1-2

Armchair and sofas firmness and durability testing

Boris Ljuljka

Volume 26 (1975), Issue 5-6

Timber market in 1974 and in the first quarter 1975