Archive

Volume 75 (2024), Issue 2

The Effect of Type of Reinforcement, Type of Glue and Reinforcement Place on Mechanical and Physical Properties of LVL

Authors:

İlkay Atar, Fatih Mengeloğlu

Keywords:

reinforced LVL; glass fiber; basalt; epoxy; phenol formaldehyde

Volume 74 (2023), Issue 1

Structural and Design Values of Solid Timber Beams and Glued Laminated Timber Beams of Dipteryx panamensis and Hieronyma alchorneoides Wood from Fast-Growth Plantation

Authors:

Róger Moya, Carolina Tenorio, Angel Navarro-Mora, Freddy Munoz

Keywords:

tropical species; bending; shear; mezzanine; glulam; mass timber

Volume 72 (2021), Issue 1

An Assessment of Environmental Impact on Glued Wood Building Elements

Authors:

Darius Albrektas, Ernestas Ivanauskas

Keywords:

glued wood (glulam); laminated veneer lumber; modulus of elasticity; coeffi cient of damping; wood defects

Volume 71 (2020), Issue 4

Finite Element Modeling of Fiber Reinforced Polymer-Based Wood Composites Used in Furniture Construction Considering Semi-Rigid Connections

Authors:

Mustafa Zor, Murat Emre Kartal

Keywords:

fiber reinforced polymer (FRP); furniture; glue; diagonal tension loading; finite element method (FEM)

Volume 68 (2017), Issue 2

Measuring the Formaldehyde Content from Different Types of Oriented Strand Board Manufactured with Different Thicknesses and Glued with Different Resins

Authors:

Mohamed Z. M. Salem, Martin Böhm, Ramadan Nasser

Keywords:

construction panels; formaldehyde content; green products; OSB

Volume 64 (2013), Issue 4

The fracture moment of corner joints bonded by different glues

Authors:

Jasna Hrovatin, Anton Zupančič, Milan Šernek, Leon Oblak

Keywords:

window; construction; joint; wood; glue

Volume 64 (2013), Issue 2

The Dilemma Whether to Produce Glued or Sawn Wooden Beams?

Authors:

Michal Zeman

Keywords:

production of static structural members; trends; production of BSH and KVH; sawn wooden beams; timber costs; wooden structures; cost- effectiveness

Volume 63 (2012), Issue 3

Quality of Corner Joints of Beech Chairs under Load

Authors:

Silvana Prekrat, Jerzy Smardzewski, Mladen Brezović, Stjepan Pervan

Keywords:

wood constructions; sitting furniture; chair joints; strength of glued beechwood joints; round mortise and tenon

Volume 62 (2011), Issue 1

Optimization of a Pressing Diagram in OSB Pressing

Authors:

Jaroslav Hrázský, Pavel Král

Keywords:

OSB; pressing; technical properties; isocyanate glue (PMDI); urea-formaldehyd glue (UF)

Volume 61 (2010), Issue 4

Effect of Glueline Shape on Strength of Mortise and Tenon Joint

Authors:

Silvana Prekrat, Jerzy Smardzewski

Keywords:

gluelin; mortise and tenon joint; numerical analysis; wood

Volume 61 (2010), Issue 3

Glued Laminated Timber in Architecture

Authors:

Manja Kitek-Kuzman, Leon Oblak, Srečko Vratuša

Keywords:

wood structure; glued laminated timber (glulam); structural elements; composite

Volume 60 (2009), Issue 1

Determination of relationships between density, amount of glue and mechanical properties of OSB

Authors:

Jaroslav Hrázský, Pavel Král

Keywords:

oriented strand board (OSB); density; bending strength; modulus of elasticity; tensile strength perpendicular to the board surface; amount of glue; PMDI glues

Volume 58 (2007), Issue 4

A new method for the determination of the proportion of wood failure area on the glue bond

Authors:

Goran Mihulja, Andrija Bogner, Davor Banči

Keywords:

wood gluing; wood failure area; digital imaging; computer image analysis

Volume 58 (2007), Issue 2

Strength and durability of glued wood Part two: Glue joint strength testing methods

Authors:

Goran Mihulja, Andrija Bogner

Keywords:

glued joint; type and shape of specimen; gluing strength; surface failure area; specimen deformation

Volume 58 (2007), Issue 1

Glued laminated panels as kitchen countertops

Authors:

Kambiz Pourtahmasi, Asghar Tarmian, Mazdak Mojarradi

Keywords:

32 mm thick MDF; 38 mm thick particleboard; glued laminated panel; kitchen countertop

Volume 56 (2005), Issue 2

Strength and durability of glued wood Part one: Factors of glued joint strength

Authors:

Goran Mihulja, Andrija Bogner

Keywords:

adhesion; glued joint; adhesives; substrate; glued joint strength; fracture area

Volume 51 (2000), Issue 1

Influence of veneer moisture content on shear strength of plywood adhesive bond

Authors:

Jože Resnik, Milan Šernek

Keywords:

peeled beech veneer; melamine-urea-formaldehyde adhesive; hot gluing; gluebond shear strength

Volume 50 (1999), Issue 4

Residual stresses in the glued structural members of wood

Authors:

Andrija Bogner, Ivica Grbac, Goran Mihulja

Keywords:

Volume 50 (1999), Issue 3

Modification of the beech – wood surface by UV – irradiation

Authors:

Goran Mihulja, Andrija Bogner, Hrvoje Turkulin

Keywords:

beech-wood; surface modification; UV light; glue-bond strength

Volume 48 (1997), Issue 1

Strength of joints in chairs made of beech and pine

Authors:

Stjepan Tkalec, Silvana Prekrat

Keywords:

technical design; chair structure; glued wood joints; joint strength

Volume 47 (1996), Issue 2

Improving the Glued Joint Strength by Modifying the Beechwood (Fagus sylvatica L) with Gamma Rays

Authors:

Andrija Bogner, Boris Ljuljka, Ivica Grbac

Keywords:

gamma rays irradiated beechwood; wetting angle; glued joint strength

Volume 41 (1990), Issue 9-10

Research on change of fire resistance of steel galvanized metal sheet doors after being veneered on both surfaces

Authors:

Mirko Gornik

Keywords:

fire resistance; veneer paneling; glued joints

Volume 40 (1989), Issue 3-4

Testing of glued »postforming« constructions for kitchen furniture

Authors:

Stjepan Tkalec

Keywords:

postforming constructions; kitchen furniture; furniture quality

Volume 40 (1989), Issue 5-6

A joining detail of corner connection of glulam portal frames (II part)

Authors:

Zvonimir Žagar

Keywords:

a joining detail of corner connection; glulam portal frames; simulating investigations; cross prestressing of glued connection

Volume 40 (1989), Issue 1-2

Technological properties of urea bonded resins important for particleboard production

Authors:

Vladimir Bruči, Marina Tatalović

Keywords:

application of glue by spraying method; size of glue drops; glue consumption; glue application

Volume 39 (1988), Issue 9-10

The comparison of shear strength of glued joint made by urea-formaldehyde and some mineral adhesives

Authors:

Milanka Điporović, Jovan Miljković

Keywords:

Volume 37 (1986), Issue 3-4

Some possibilities of manufacturing fireproof plywood

Authors:

Stjepan Petrović, Josip Klekar

Keywords:

fireproof plywood; structural protection; phenol-formaldehyde glue

Volume 37 (1986), Issue 5-6

Glueing with waterproof synthetic glues

Authors:

Stjepan Petrović, Zora Smolčić-Žerdik

Keywords:

water resistant synthetic glues; glueing quality

Volume 37 (1986), Issue 7-8

Wooden construction by the use of glued prestressed wooden material

Authors:

Ninoslav Lovrić

Keywords:

glued prestressed wooden material; beamsupporting of glued prestressed wood; wood sliding

Volume 36 (1985), Issue 3-4

Building construction from glued timber in ČSSR

Authors:

Jindrich Frais

Keywords:

Volume 36 (1985), Issue 7-8

Timber buildings structures in the USSR

Authors:

Jindrich Frais

Keywords:

timber houses; glued beams; wallpanels in building construction

Volume 36 (1985), Issue 11-12

Research into the possibility of the production of glue-laminated electro-conducting poles

Authors:

Stjepan Petrović, Slavko Kovačević, Salah-Eldien Omer, Ilija Stjepčević

Keywords:

glue laminated wooden poles; resorcin-phenol-formaldehyde glue

Volume 34 (1983), Issue 7-8

Determination of quantity of glue in wood-based panel products

Authors:

Salah-Eldien Omer

Keywords:

chemical and physical methods; infrared spectrometry and X-ray spectrometry

Volume 33 (1982), Issue 11-12

Some experiences obtained in testing glued-laminated structural members

Authors:

Salah-Eldien Omer

Keywords:

laminated structural members; species for laminating; quality of glue joints; method of test; factors influencing the quality

Volume 32 (1981), Issue 7-8

Comparative testing of firmness and durability of glued joints in products of building trade

Authors:

Ivica Grbac, Zlatko Purgar, Boris Ljuljka, Andrija Bogner

Keywords:

firmness and durability of glued joints; surface finishing; breaking strength; accuracy of finishing; exposure to weather conditions

Volume 31 (1980), Issue 7-8

Gluing time of veneers as function of the temperature change intensity in the joints

Authors:

Murat Backović

Keywords:

time of glue hardening; chemical and physical changes in joints; time of the loss of capacity of glue hardening; temperature flow in the joints; intensity of temperature changes in the joints; coefficient of temperature conductivity

Volume 31 (1980), Issue 7-8

Contribution to examination of influences of some technological factors on the quality of wood gluing

Authors:

Stjepan Petrović, Vladimir Ferdelji

Keywords:

laminated wood structures; factorial plan of experiment; level of the factor influence; shearing strength; penetration of glue into the wood; significance of the factor influence

Volume 30 (1979), Issue 4

Durability of joints glued with PVA adhesives under exterior conditions

Authors:

Boris Ljuljka, Željko Šonje

Keywords:

durability of glued joints; water-resistance of adhesives; strength of joints

Volume 28 (1977), Issue 11-12

Use of glued prestressed wooden material in civil engineering structures

Authors:

Ninoslav Lovrić

Keywords:

glulam ( glued-laminated) prestressed wooden material; beams of glulam prestressed wood; creep in the wood

Volume 27 (1976), Issue 3-4

Application of statistical methods in glue testing

Authors:

Željko Šonje

Keywords:

Volume 27 (1976), Issue 5-6

Application of statistical methods in glue testing

Authors:

Željko Šonje

Keywords:

The Effect of Type of Reinforcement, Type of Glue and Reinforcement Place on Mechanical and Physical Properties of LVL

Structural and Design Values of Solid Timber Beams and Glued Laminated Timber Beams of Dipteryx panamensis and Hieronyma alchorneoides Wood from Fast-Growth Plantation

An Assessment of Environmental Impact on Glued Wood Building Elements

Finite Element Modeling of Fiber Reinforced Polymer-Based Wood Composites Used in Furniture Construction Considering Semi-Rigid Connections

Measuring the Formaldehyde Content from Different Types of Oriented Strand Board Manufactured with Different Thicknesses and Glued with Different Resins

The fracture moment of corner joints bonded by different glues

The Dilemma Whether to Produce Glued or Sawn Wooden Beams?

Quality of Corner Joints of Beech Chairs under Load

Optimization of a Pressing Diagram in OSB Pressing

Effect of Glueline Shape on Strength of Mortise and Tenon Joint

Glued Laminated Timber in Architecture

Determination of relationships between density, amount of glue and mechanical properties of OSB

A new method for the determination of the proportion of wood failure area on the glue bond

Strength and durability of glued wood Part two: Glue joint strength testing methods

Glued laminated panels as kitchen countertops

Strength and durability of glued wood Part one: Factors of glued joint strength

Influence of veneer moisture content on shear strength of plywood adhesive bond

Residual stresses in the glued structural members of wood

Modification of the beech – wood surface by UV – irradiation

Strength of joints in chairs made of beech and pine

Improving the Glued Joint Strength by Modifying the Beechwood (Fagus sylvatica L) with Gamma Rays

Research on change of fire resistance of steel galvanized metal sheet doors after being veneered on both surfaces

Testing of glued »postforming« constructions for kitchen furniture

A joining detail of corner connection of glulam portal frames (II part)

Technological properties of urea bonded resins important for particleboard production

The comparison of shear strength of glued joint made by urea-formaldehyde and some mineral adhesives

Some possibilities of manufacturing fireproof plywood

Glueing with waterproof synthetic glues

Wooden construction by the use of glued prestressed wooden material

Building construction from glued timber in ČSSR

Timber buildings structures in the USSR

Research into the possibility of the production of glue-laminated electro-conducting poles

Determination of quantity of glue in wood-based panel products

Some experiences obtained in testing glued-laminated structural members

Comparative testing of firmness and durability of glued joints in products of building trade

Gluing time of veneers as function of the temperature change intensity in the joints

Contribution to examination of influences of some technological factors on the quality of wood gluing

Durability of joints glued with PVA adhesives under exterior conditions

Use of glued prestressed wooden material in civil engineering structures

Application of statistical methods in glue testing

Application of statistical methods in glue testing

Publisher