Archive

Volume 75 (2024), Issue 1

Comparative Study on Dimensional Stability and Biological Durability of Poplar Wood Modified by Chemical and Heat Treatment

Authors:

Ajmal Samani, Sauradipta Ganguly, Sanjeet Kumar Hom, Varun Sharma

Keywords:

biological durability; chemical modification; dimensional stability; heat treatment

Volume 75 (2024), Issue 2

Dimensional Stability Properties of Medium-Density Fiberboards Produced Using Silicone-Based Chemicals

Authors:

Meryem Ondaral, Mustafa Usta, Sedat Ondaral

Keywords:

MDF; hydrophobic; silicone-based chemical; water repellent; dimensional stability

Volume 74 (2023), Issue 3

Chemical Content and Antimicrobial Activities of Essential Oils Obtained from Plant Parts of Juniperus excelsa M. Bieb.

Authors:

Emrah Saruhan, Mehmet Öz

Keywords:

antimicrobial activity; chemical content; GC-MS; essential oil; Juniperus excelsa M. Bieb.

Volume 74 (2023), Issue 4

Comparison of Reaction Wood and Normal Wood of Some Commercial Tree Species

Authors:

Sevinç Kaz, Saim Ateş, Tuba Külçe

Keywords:

pine; fir; oak; beech; anatomical and chemical structure

Volume 74 (2023), Issue 1

Synthesis of Phenolic Resin Reinforced with TiO2 Nanoparticles and its Effect on Combustion Performance of Laminated Veneer Lumber (LVL)

Authors:

Günay Özbay, Musa Atar, Ayhan Ozcifci

Keywords:

adhesive; combustion; FT-IR; nano-chemicals; TiO2 nanoparticles

Volume 74 (2023), Issue 4

Influence of Pre-Impregnation Acetic Anhydride and Heating Time on Mechanical and Physical Properties of Wood-Plastic Composites

Authors:

Seyyed Khalil Hosseinihashemi, Mohammad-Ali Akhoundi, Younes Shirmohammadli, Nadir Ayrilmis

Keywords:

WPCs; wood flour; acetylation; chemical modification; mechanical properties

Volume 74 (2023), Issue 3

Physical and Chemical Properties of Highland Bamboo (Yushania alpina) Culms Grown in Ethiopia

Authors:

Mahadi Mussa, Getachew Desalegn, Gemechu Kaba, Anteneh Tesfaye

Keywords:

bamboo (Yushania alpina); basic density; cellulose; lignin; moisture content; shrinkage

Volume 74 (2023), Issue 3

Selected Chemical and Physical Properties of Pine Wood Chips Inoculated with Aspergillus and Penicillium Mold Fungi

Authors:

Radosław Mirski, Jakub Kawalerczyk, Dorota Dziurka, Kinga Stuper-Szablewska, Joanna Walkiewicz

Keywords:

mold fungi; wood chips; FTIR spectroscopy; mass loss; hygroscopicity

Volume 73 (2022), Issue 2

Composition of Essential Oils in Needles and Barks of Turkish Red Pine (Pinus brutia Ten.) Infested by Marchalina hellenica Genn.

Authors:

Mustafa Burak Arslan, Selçuk Küçükaydin, Meltem Taş-Küçükaydin, Mehmet Emin Duru, Halil Turgut Şahin

Keywords:

Marchalina hellenica, Pinus brutia, essential oils, GC-MS, needles, bark

Volume 73 (2022), Issue 2

Chemical Changes and Environmental Issues of Heat Treatment of Wood

Authors:

Nikolina Barlović, Anka Ozana Čavlović, Stjepan Pervan, Miljenko Klarić, Silvana Prekrat, Nikola Španić

Keywords:

heat treatment, heat-treated wood, wood components, colour change, ecology

Volume 72 (2021), Issue 2

Chemical and Structural Characterization of Poplar and Black Pine Wood Exposed to Short Thermal Modification

Authors:

Vasiliki Kamperidou

Keywords:

cellulose; chemical composition; FTIR; lignin; thermal treatment; wood

Volume 71 (2020), Issue 1

Synthesis of Bio-Oilphenol-Formaldehyde Resins under Alkali Conditions: Physical, Chemical and Thermal Properties of Resins and Bonding Performance

Authors:

Günay Özbay, Caglar Cekic, Muhammad Syarhabil Ahmad, Erkan Sami Kokten

Keywords:

bio-phenol; bonding performance; phenol formaldehyde resin; shear strength

Volume 71 (2020), Issue 1

Anatomical, Chemical and Mechanical Characteristics of Beech Wood Degraded by Two Pleurotus Species

Authors:

Yaghoob Azimi, Mohsen Bahmani, Ali Jafari, Hamid Reza Riyahi Bakhtyari

Keywords:

Pleurotus cornucopiae; Pleurotus eryngii; Trametes versicolor; wood decay; chemical analysis; light microscopy

Volume 71 (2020), Issue 1

Hygrothermal Treatment of Tepa (Laureliopsis philippiana Looser) Fibers: Effects on Chemical and Physical Properties

Authors:

Rommel Crespo Gutiérrez, Marco Torres Uribe, Hernán Wilson

Keywords:

hygrothermal treatment; Laureliopsis philippiana; fibers; physical and chemical properties; acidity; fiberboards

Volume 71 (2020), Issue 1

Preferences of Different Target Groups of Consumers in Case of Furniture Purchase

Authors:

Leon Oblak, Branko Glavonjić, Andreja Pirc Barčić, Petra Grošelj, Teja Bizjak Govedič

Keywords:

marketing; buying decision process; furniture; conjoint analysis

Volume 70 (2019), Issue 4

Assessment of Efficacy and Effectiveness of Some Extracted Bio-Chemicals as Bio-Fungicides on Wood

Authors:

Mohamed Z. M. Salem, Safa Abd El-Kader Mohamed Hamed, Maisa M. A. Mansour

Keywords:

bio-fungicides; wood; essential oils; extracts; antifungal activity

Volume 70 (2019), Issue 4

The Effect of Using Alum Mordant in Wild Cherry Bark Dyestuff for the Production of UV Resistant Colored Paper

Authors:

Ayhan Gençer, Ahmet Can, Aysun Mustak, Ülkü Burcu Gitti

Keywords:

wild cherry bark; chemical-thermomechanical pulp (CTMP); alum; weathering

Volume 70 (2019), Issue 2

Chemical and Application Properties of Some Solvent and Water Based Coatings on Wooden Substrate

Authors:

Shikhar Shukla, Krishna K. Pandey, Kishan Kumar

Keywords:

organic coatings; water borne coatings; NC lacquer; polyurethane; Melia dubia; film thickness; FTIR; gloss

Volume 70 (2019), Issue 1

Abrasion Resistance of Thermally and Chemically Modified Timber

Authors:

Christian Brischke, Neele Ziegeler, Susanne Bollmus

Keywords:

flooring; chemical wood modification; Shaker method; Taber Abraser; thermally modified wood; wear

Volume 69 (2018), Issue 3

Effects of Catalysts on Modulus of Rupture and Chemical Structure of Heat – Treated Wood

Authors:

Ayhan Ozcifci, Erkan Sami Kokten, Nadir Ayrilmis, Günay Özbay, Suat Altun

Keywords:

heat treatment; Scotch pine; mechanical strength; catalyst; chemical properties

Volume 69 (2018), Issue 3

Effect of Extraction Technique on Composition of Volatile Constituents of Oleoresin from Pinus Brutia Ten.

Authors:

Samim Yasar, Abdullah Beram, Gurcan Guler

Keywords:

volatile constituents; oleoresin; hydrodistillation; solid phase microextraction (SPME); GC/MS

Volume 69 (2018), Issue 1

Chemical Composition, Fiber Morphology, and Kraft Pulping of Bracken Stalks (Pteridium aquilinum (L.) Kuhn)

Authors:

Sezgin Koray Gülsoy, Serhat Şimşir

Keywords:

bracken; KBH4; kraft; NaBH4; Pteridium aquilinum (L.) Kuhn.; paper properties

Volume 68 (2017), Issue 4

Influence of Temperature on Composition of Wood Pyrolysis Products

Authors:

Paweł Kazimierski, Dariusz Kardaś

Keywords:

Pyrolysis; thermal decomposition; Thermogravimetric Analysis (TGA); Biomass; Bio-oil

Volume 68 (2017), Issue 2

Chemical Characterization of Lebonan Cedar Tar

Authors:

Ayben Kilic Pekgözlü, Suleyman Kustas, Burak Mercan, Aziz Bicer

Keywords:

Cedrus libani; himachalane; pyrolysis; GC-MS; Jenkner Retort

Volume 68 (2017), Issue 2

Chemical Characterization of Bio-oil from Pyrolysis of Undecayed and Decayed Fagus orientalis Wood

Authors:

Seyyed Khalil Hosseinihashemi, Saeed Hassani, Ahmad Jahan Latibari, Günay Özbay

Keywords:

beech wood; Trametes versicolor; pyrolysis; GC/MS; oil compound

Volume 68 (2017), Issue 1

Chemical and Physical Properties of Pine Wood during Pyrolysis

Authors:

Karol Ronewicz, Jacek Kluska, Łukasz Heda, Dariusz Kardaś

Keywords:

pyrolysis; pine wood; wood permeability; wood density; pyrolysis gas; thermogravimetric analysis

Volume 67 (2016), Issue 3

Calorific Value and Chemical Properties in Juvenile and Mature Wood of Thermally-Modified Eucalyptus Grandis

Authors:

Fred Willians Calonego, Elias Taylor Durgante Severo, Cláudio Angeli Sansígolo, Marcos Antonio de Rezende, Edson Marcelo Bruder, Vladimir Eliodoro Costa

Keywords:

biomass; energy; chemical properties; Eucalypts; thermally-modified wood

Volume 67 (2016), Issue 3

Investigation of Isatis Tinctoria and Isatis Buschiana Stalks as Raw Materials for Pulp and Paper Production

Authors:

Nazan Comlekcioglu, Ahmet Tutuş, Mustafa Çiçekler, Asuman Canak, Gulsen Zengin

Keywords:

I. tinctoria; I. buschiana; chemical composition; pulp; paper

Volume 67 (2016), Issue 2

Chemical Composition of Straw as an Alternative Material to Wood Raw Material in Fibre Isolation

Authors:

Ivana Plazonić, Željka Barbarić-Mikočević, Alan Antonović

Keywords:

straw; wheat; barley; triticale; chemical composition

Volume 67 (2016), Issue 1

Effect of Press Cycle Time on Application Behavior of Board Made from Chemically Modified Particles

Authors:

Maryam Ghorbani, Fatemeh Bavaneghi

Keywords:

press time; acetylation; particleboard; thickness swelling; mechanical strength; decay resistance

Volume 67 (2016), Issue 1

Influence of Thermal Modification on Surface Properties and Chemical Composition of Beech Wood (Fagus sylvatica L.)

Authors:

Josip Miklečić, Vlatka Jirouš-Rajković

Keywords:

thermal modification; contact angle; surface free energy; wood chemical composition

Volume 66 (2015), Issue 3

Chemical Composition of Oleoresin and Larvae Gallery Resin of Pinus Brutia Attacked by Dioryc tria Sylvestrella Ratz.

Authors:

Mehmet Öz, İlhan Deniz, Onur Tolga Okan, M. Said Fidan

Keywords:

Acid-Paste Method; Dioryctria sylvestrella Ratz; Larvae gallery resin; Oleoresin; Pinus brutia

Volume 66 (2015), Issue 3

Trade Performance and Competitiveness of the Slovak Wood Processing Industry within the Visegrad Group Countries

Authors:

Hubert Paluš, Ján Parobek, Branko Liker

Keywords:

trade performance; competitiveness; wood products; Visegrad group

Volume 63 (2012), Issue 1

Compression Strength of Fir and Beech Wood Modified by Citric Acid

Authors:

Bogoslav Šefc, Jelena Trajković, Tomislav Sinković, Marin Hasan, Iva Ištok

Keywords:

Fir wood (Abies alba Mill.); beech wood (Fagus sylvatica L.); chemical modification; citric acid (CA); compression strength

Volume 62 (2011), Issue 4

Extraction Methods of Spanish Broom (Spartium Junceum L.)

Authors:

Drago Katović, Andrea Katović, Alan Antonović

Keywords:

Spanish Broom fibers; fiber extraction; chemical composition; FTIR; MW

Volume 62 (2011), Issue 4

Accelerated Weathering of Coated and Uncoated Beech Wood Modified with Citric Acid

Authors:

Josip Miklečić, Vlatka Jirouš-Rajković

Keywords:

chemical modification; citric acid; QUV weathering; wood stain; beech wood

Volume 61 (2010), Issue 1

Economic Aspects of Raw Material Inputs for SAQ Pulp Production at the Time of Crisis

Authors:

Zoltán Nagy, Josef Drábek

Keywords:

pulp and paper industry; raw material inputs; economic efficiency; semi-chemical (SC) fluting; soda anthraquinone (SAQ) pulp production

Volume 60 (2009), Issue 2

Fire retardants for wood

Authors:

Vlatka Jirouš-Rajković, Josip Miklečić

Keywords:

wood; combustion of wood; fire retardants; fire retardant coatings; chemical impregnation by pressure-treating

Volume 60 (2009), Issue 1

Dimensional stability of wood modified by citric acid using different catalysts

Authors:

Bogoslav Šefc, Jelena Trajković, Marin Hasan, Drago Katović, Sandra Bischof Vukušić, Martina Frančić

Keywords:

dimensional stability of wood; beech wood; fir wood; chemical modification; citric acid; NaH2PO2; NaH2PO4

Volume 59 (2008), Issue 2

Biological durability of wood modified by citric acid

Authors:

Radovan Despot, Marin Hasan, Matija Jug, Bogoslav Šefc

Keywords:

chemical modification of wood; esterification; citric acid; biological durability; Poria placenta; beechwood

Volume 59 (2008), Issue 1

Ecological issues of byproducts in hydrothermal wood processing

Authors:

Stjepan Pervan, Goran Draščić, Alan Antonović

Keywords:

hydrothermal wood processing; atmospheric emission; condensate; chemical constituents

Volume 58 (2007), Issue 3

Influence of sampling location on sapwood group chemical composition of beech wood (Fagus sylvatica L.)

Authors:

Alan Antonović, Vladimir Jambreković, Stjepan Pervan, Josip Ištvanić, Maja Moro, Janja Zule

Keywords:

group chemical composition; beech wood (Fagus sylvatica L.); sapwood; sampling location; phytocoenological criteria

Volume 56 (2005), Issue 3

Influence of selected factors on granulometric composition of chips in plane milling of juvenile pine wood

Authors:

Štefan Barcík, Eva Pivolusková, Mária Kotlínová

Keywords:

pine wood; juvenile wood; mature wood; plane milling; granulometric analysis

Volume 55 (2004), Issue 4

Alternative agents and methods for chemical modification of wood

Authors:

Drago Katović, Jelena Trajković, Sandra Bischof Vukušić, Bogoslav Šefc

Keywords:

chemically modified wood; citric acid - CA; DMDHEU; microwave treatment; dimensional stability; discoloration

Volume 55 (2004), Issue 4

Cellular manufacturing system and its application in a furniture factory

Authors:

Ercan Tanritanir

Keywords:

Cellular Manufacturing System; Group Technology; Cellular Layout; Furniture Industry

Volume 49 (1998), Issue 3

A supplement to the knowledge on chemical properties of beech bark

Authors:

Neven Bujas

Keywords:

beech; chemical properties of beech bark; HPLC; metals

Volume 48 (1997), Issue 2

Production possibilities for structurally protected plywood by chemical fire-retardants

Authors:

Mladen Brezović

Keywords:

structural protection; fire-retardant chemicals; physical and mechanical properties; fire-retardance; fire-tube method

Volume 45 (1994), Issue 4

Removing the original coating off a wooden substrate

Authors:

Vlatka Jirouš-Rajković

Keywords:

coating; paint stripping; sanding; scraping; chemical strippers

Volume 45 (1994), Issue 3

Contributions to the knowledge of the Adriatic sea wood marine borers

Authors:

Radovan Despot

Keywords:

marine wood borers; Mediterranean and Adriatic sea; chemical protection of wood in the sea

Volume 40 (1989), Issue 9-10

Formaldehyde liberation during the manufacture and storage of composition materials

Authors:

Jadranko Jahić, Vladimir Bruči

Keywords:

free formaldehyde; reduced formaldehyde emission; formaldehyde source interaction

Volume 40 (1989), Issue 11-12

Protection of fir wood joinery by double vacuum method

Authors:

Božidar Petrić, Velimir Šćukanec, Radovan Despot, Jelena Trajković

Keywords:

Chemical protection of fir wood; double vacuum method; penetration and apsorption of wood preservative

Volume 39 (1988), Issue 5-6

Chemical and anatomical properties and possibility of firwood sawmill residue utilization for high-yield chemimechanical pulps production

Authors:

Tatjana Stevanović Janežić, Biljana Bujanović

Keywords:

firwood sawmill residue; Abies pectinata; chemical composition; anatomical properties; softwood chips; high-yield pulps; chemimechanical pulping; chemithermomechanical pulping; softwood sulfonation; quuinomethide; sulphonated lignin; better qualities CMP/CTMP

Volume 38 (1987), Issue 9-10

Development of timber conversion and utilization of Slavonian oak and other hardwood species in Croatia from 1699 to 1984

Authors:

Marko Gregić

Keywords:

forest exploitation; sawmilling and chemical processing of wood; woodworking; development of timber industry in Croatia

Volume 37 (1986), Issue 9-10

Integral utilization of raw material

Authors:

Vladimir Sertić

Keywords:

chemical conversion of wood; pulp and paper; thermal conversion; hydrolysis of carbohydrates; lignin; extractives

Volume 37 (1986), Issue 3-4

Preliminary investigation of fire-retardant treatments for flakeboards

Authors:

Theodore Laufenberg, Susan Le Van, Vladimir Bruči

Keywords:

fire protective chemicals; oxygen index

Volume 36 (1985), Issue 5-6

Fire retardant chemicals for increase of fire resistance of high density fibreboards manufactured by dry process and mdf boards

Authors:

Vladimir Bruči, Marina Tatalović

Keywords:

fire retardant agent; flame spread index

Volume 36 (1985), Issue 9-10

On the chemism of endocarp of some forest trees and bushes

Authors:

Milan Kaić

Keywords:

endocarp; forest by-products; chemical ingredients; mineral stuff

Volume 34 (1983), Issue 4

Conversion of decidious species by combination of mechanical and chemical processing, particulary from aspect of solving the problem of wood waste

Authors:

Mile Orešković

Keywords:

chemical wood processing and sawmilling; wood waste; wood briquettes from sawdust and baric; integral utilization of wood

Volume 34 (1983), Issue 7-8

Determination of quantity of glue in wood-based panel products

Authors:

Salah-Eldien Omer

Keywords:

chemical and physical methods; infrared spectrometry and X-ray spectrometry

Volume 33 (1982), Issue 3-4

Laboratory tests of possibilities to manufacture fire-retardant particle boards

Authors:

Salah-Eldien Omer

Keywords:

fire-retardant chemicals; laboratory made fire-retardant particle boards

Volume 33 (1982), Issue 11-12

Preservation of beech sleepers during storage in warehouses

Authors:

Slavko Kovačević, Magda Hlevnjak

Keywords:

anatomy of beechwood; wood-destroying fungi; chemical agents for preservation of wood

Volume 31 (1980), Issue 7-8

Gluing time of veneers as function of the temperature change intensity in the joints

Authors:

Murat Backović

Keywords:

time of glue hardening; chemical and physical changes in joints; time of the loss of capacity of glue hardening; temperature flow in the joints; intensity of temperature changes in the joints; coefficient of temperature conductivity

Volume 29 (1978), Issue 1-2

Quality factors of armchairs, sofas and seating groups

Authors:

Boris Ljuljka, Božidar Sinković

Keywords:

quality factors; armchairs; sofas and seating groups; durability and firmness; construction of seats

Comparative Study on Dimensional Stability and Biological Durability of Poplar Wood Modified by Chemical and Heat Treatment

Dimensional Stability Properties of Medium-Density Fiberboards Produced Using Silicone-Based Chemicals

Chemical Content and Antimicrobial Activities of Essential Oils Obtained from Plant Parts of Juniperus excelsa M. Bieb.

Comparison of Reaction Wood and Normal Wood of Some Commercial Tree Species

Synthesis of Phenolic Resin Reinforced with TiO2 Nanoparticles and its Effect on Combustion Performance of Laminated Veneer Lumber (LVL)

Influence of Pre-Impregnation Acetic Anhydride and Heating Time on Mechanical and Physical Properties of Wood-Plastic Composites

Physical and Chemical Properties of Highland Bamboo (Yushania alpina) Culms Grown in Ethiopia

Selected Chemical and Physical Properties of Pine Wood Chips Inoculated with Aspergillus and Penicillium Mold Fungi

Composition of Essential Oils in Needles and Barks of Turkish Red Pine (Pinus brutia Ten.) Infested by Marchalina hellenica Genn.

Chemical Changes and Environmental Issues of Heat Treatment of Wood

Chemical and Structural Characterization of Poplar and Black Pine Wood Exposed to Short Thermal Modification

Synthesis of Bio-Oilphenol-Formaldehyde Resins under Alkali Conditions: Physical, Chemical and Thermal Properties of Resins and Bonding Performance

Anatomical, Chemical and Mechanical Characteristics of Beech Wood Degraded by Two Pleurotus Species

Hygrothermal Treatment of Tepa (Laureliopsis philippiana Looser) Fibers: Effects on Chemical and Physical Properties

Preferences of Different Target Groups of Consumers in Case of Furniture Purchase

Assessment of Efficacy and Effectiveness of Some Extracted Bio-Chemicals as Bio-Fungicides on Wood

The Effect of Using Alum Mordant in Wild Cherry Bark Dyestuff for the Production of UV Resistant Colored Paper

Chemical and Application Properties of Some Solvent and Water Based Coatings on Wooden Substrate

Abrasion Resistance of Thermally and Chemically Modified Timber

Effects of Catalysts on Modulus of Rupture and Chemical Structure of Heat – Treated Wood

Effect of Extraction Technique on Composition of Volatile Constituents of Oleoresin from Pinus Brutia Ten.

Chemical Composition, Fiber Morphology, and Kraft Pulping of Bracken Stalks (Pteridium aquilinum (L.) Kuhn)

Influence of Temperature on Composition of Wood Pyrolysis Products

Chemical Characterization of Lebonan Cedar Tar

Chemical Characterization of Bio-oil from Pyrolysis of Undecayed and Decayed Fagus orientalis Wood

Chemical and Physical Properties of Pine Wood during Pyrolysis

Calorific Value and Chemical Properties in Juvenile and Mature Wood of Thermally-Modified Eucalyptus Grandis

Investigation of Isatis Tinctoria and Isatis Buschiana Stalks as Raw Materials for Pulp and Paper Production

Chemical Composition of Straw as an Alternative Material to Wood Raw Material in Fibre Isolation

Effect of Press Cycle Time on Application Behavior of Board Made from Chemically Modified Particles

Influence of Thermal Modification on Surface Properties and Chemical Composition of Beech Wood (Fagus sylvatica L.)

Chemical Composition of Oleoresin and Larvae Gallery Resin of Pinus Brutia Attacked by Dioryc tria Sylvestrella Ratz.

Trade Performance and Competitiveness of the Slovak Wood Processing Industry within the Visegrad Group Countries

Compression Strength of Fir and Beech Wood Modified by Citric Acid

Extraction Methods of Spanish Broom (Spartium Junceum L.)

Accelerated Weathering of Coated and Uncoated Beech Wood Modified with Citric Acid

Economic Aspects of Raw Material Inputs for SAQ Pulp Production at the Time of Crisis

Fire retardants for wood

Dimensional stability of wood modified by citric acid using different catalysts

Biological durability of wood modified by citric acid

Ecological issues of byproducts in hydrothermal wood processing

Influence of sampling location on sapwood group chemical composition of beech wood (Fagus sylvatica L.)

Influence of selected factors on granulometric composition of chips in plane milling of juvenile pine wood

Alternative agents and methods for chemical modification of wood

Cellular manufacturing system and its application in a furniture factory

A supplement to the knowledge on chemical properties of beech bark

Production possibilities for structurally protected plywood by chemical fire-retardants

Removing the original coating off a wooden substrate

Contributions to the knowledge of the Adriatic sea wood marine borers

Formaldehyde liberation during the manufacture and storage of composition materials

Protection of fir wood joinery by double vacuum method

Chemical and anatomical properties and possibility of firwood sawmill residue utilization for high-yield chemimechanical pulps production

Development of timber conversion and utilization of Slavonian oak and other hardwood species in Croatia from 1699 to 1984

Integral utilization of raw material

Preliminary investigation of fire-retardant treatments for flakeboards

Fire retardant chemicals for increase of fire resistance of high density fibreboards manufactured by dry process and mdf boards

On the chemism of endocarp of some forest trees and bushes

Conversion of decidious species by combination of mechanical and chemical processing, particulary from aspect of solving the problem of wood waste

Determination of quantity of glue in wood-based panel products

Laboratory tests of possibilities to manufacture fire-retardant particle boards

Preservation of beech sleepers during storage in warehouses

Gluing time of veneers as function of the temperature change intensity in the joints

Quality factors of armchairs, sofas and seating groups

Publisher