Archive

Volume 75 (2024), Issue 3

Volume 73 (2022), Issue 3

Quality and Dimensional Parameters of Large-Sized Pine Timber in View of Expectations of Polish Sawmill Industry

Authors:

Marek Wieruszewski, Zbigniew Malinowski, Radosław Mirski

Keywords:

scots pine; large-size wood; classification; wood defects; market preferences

Volume 71 (2020), Issue 3

The Effect of Sapwood and Heartwood Differences on Mechanical Properties of Fast-Growing Tree Species

Authors:

İbrahim Bektaş, Ahmet Tutuş, Gamze Gültekin

Keywords:

mechanical properties; sapwood; heartwood; softwoods; hardwoods

Volume 69 (2018), Issue 4

Influence of Bed Movement and Amount of Supplied Air on Updraft Gasification of Hardwood Pellet

Authors:

Jacek Kluska, Paweł Kazimierski, Mateusz Ochnio, Dariusz Kardaś

Keywords:

gasification; updraft gasifier; hardwood; carbon conversion; bed movement

Volume 67 (2016), Issue 2

Contribution to Research on Certain Production Costs by Investing into Computer Aided Technology of Production of Wooden Elements with Pre-Planing of Sawn Wood

Authors:

Josip Faletar, Andreja Čunčić Zorić, Zlatko Budrović, Tomislav Pađen

Keywords:

wood elements; planing; classic secondary sawmill; computer aided secondary sawmill; production costs

Volume 66 (2015), Issue 4

Production Costs as a Basic Factor of Competitiveness of Softwood Sawmilling

Authors:

Kristinka Liker, Andreja Pirc Barčić, Darko Motik

Keywords:

wood processing; costs; competitiveness; calculations; logs; sawn wood

Volume 66 (2015), Issue 2

Assessment of “Uso Fiume” Larch Beams Production in the Sawmilling Industry of Aosta Valley Region – Northwestern Italy

Authors:

Corrado Cremonini, Francesco Negro, Manuela Romagnoli, Roberto Zanuttini

Keywords:

Structural timber; larch; CE marking; Uso Fiume beams; sawmills; Aosta Valley

Volume 65 (2014), Issue 4

Forest Resources and Sawmill Structure of Kosovo: State of the Art and Perspectives

Authors:

Agron Bajraktari, Alexander Petutschnigg, Muhamet Ymeri, Zeki Candan, Süleyman Korkut, Lina Nunes, Helena Pereira

Keywords:

forest resources; sawmills; Kosovo

Volume 65 (2014), Issue 3

Noise Measurements in Timber Industries

Authors:

Vasiliki Dimou

Keywords:

noise pollution; hearing loss; occupational disease; sawmills

Volume 65 (2014), Issue 2

Effectiveness of Asymmetrical Veneering with Hardwood Species of Varying Shrinkage and Porosity

Authors:

Sylwia Olenska, Pawel Tarcicki, Mariusz L. Mamiński, Piotr Beer

Keywords:

asymmetrical veneering; wood-based panels; deformations; shrinkage; porosity

Volume 65 (2014), Issue 1

Influence of the Sawing Method on Yield of Beech Logs with Red Heartwood

Authors:

Ranko Popadić, Borislav Šoškić, Goran Milić, Nebojša Todorović, Mladen Furtula

Keywords:

beech; sawmill processing; methods of sawing; yield; red heartwood

Volume 63 (2012), Issue 1

Lumber Recovery Efficiency among Selected Sawmills in Akure, Nigeria

Authors:

Babatola Olufemi, Joseph Olalekan Akindeni, Samuel Oluyinka Olaniran

Keywords:

sawmills; lumber recovery; wood residue; logs

Volume 62 (2011), Issue 3

Sawing Capacities in the Czech Republic

Authors:

Petr Pražan

Keywords:

Czech sawmilling; sawmill production; sawing capacities; log cutting technology

Volume 60 (2009), Issue 4

Estimation of technical efficiency in production technologies of Czech sawmills

Authors:

Přemysl Šedivka

Keywords:

technical efficiency; frontier production function; wood-processing industry

Volume 60 (2009), Issue 3

Sawmilling in the Czech Republic

Authors:

Jan Bomba

Keywords:

Czech sawmilling industry; development; sawmills; sawmilling products; technology

Volume 59 (2008), Issue 4

Sawmilling in Croatia Part 2 – Croatian Sawmilling in New Millennium

Authors:

Josip Ištvanić, Alan Antonović, Stjepan Pervan, Vladimir Jambreković, Zlatko Benković, Marijan Kavran

Keywords:

Croatian sawmilling industry; sawmilling technology; sawmilling raw material; sawmilling products

Volume 52 (2001), Issue 4

Quantity yield of European walnut sawlogs (Juglans regia L.) during sawmilling

Authors:

Tomislav Prka, Josip Ištvanić, Ana Trušček

Keywords:

European walnut (Juglans regia L.); sawmilling of European walnut; quantity yield; production of parquet; solid lam parquet; finished parquet

Volume 45 (1994), Issue 2

Changes in moisture content during hardwood air-seasoning

Authors:

Zdenko Pavlin, Stjepan Pervan, M. Špoljarić

Keywords:

air-seasoning; hardwoods; final moisture content; drying time

Volume 45 (1994), Issue 1

Some characteristics of means of transport in sawmill storages

Authors:

Ružica Beljo Lučić

Keywords:

handling material; means of transport; log storage; lumber storage

Volume 44 (1993), Issue 1

Hplc analysis of monosaccharides of some home grown wood species

Authors:

Vesna Tišler

Keywords:

Monosaccharides; hardwoods; hydrolysis; liquid chromatography

Volume 39 (1988), Issue 11-12

Development of oak wood sawmilling (Part 2)

Authors:

Tomislav Prka

Keywords:

Volume 39 (1988), Issue 9-10

Development of oak wood sawmilling

Authors:

Tomislav Prka

Keywords:

conventional sawmilling of oak; dimension stock technology of oak; conversion of thin oak logs

Volume 39 (1988), Issue 5-6

Chemical and anatomical properties and possibility of firwood sawmill residue utilization for high-yield chemimechanical pulps production

Authors:

Tatjana Stevanović Janežić, Biljana Bujanović

Keywords:

firwood sawmill residue; Abies pectinata; chemical composition; anatomical properties; softwood chips; high-yield pulps; chemimechanical pulping; chemithermomechanical pulping; softwood sulfonation; quuinomethide; sulphonated lignin; better qualities CMP/CTMP

Volume 38 (1987), Issue 9-10

Development of timber conversion and utilization of Slavonian oak and other hardwood species in Croatia from 1699 to 1984

Authors:

Marko Gregić

Keywords:

forest exploitation; sawmilling and chemical processing of wood; woodworking; development of timber industry in Croatia

Volume 38 (1987), Issue 7-8

Production of dimension stock in Yugoslav sawmills

Authors:

Tomislav Prka

Keywords:

purposive conversion of oak and beech; single-phase conversion; two-phase conversion

Volume 37 (1986), Issue 1-2

Mechanization and automation in handling sawn timber in ports

Authors:

Ivan Barberić

Keywords:

mechanical sawn timber sorting

Volume 37 (1986), Issue 3-4

Structure dimension tendency of sawmill conifer logs

Authors:

Zdravko Stupar

Keywords:

average log diameter; log taper

Volume 36 (1985), Issue 9-10

Sawmilling technology development

Authors:

Zdravko Horvat

Keywords:

prerada hrastovine; elektroničko računalo

Volume 35 (1984), Issue 9-10

Development of sawmill wood manufacture

Authors:

Branko Guštin

Keywords:

development of sawmill manufacture; specified-purpose production of elements

Volume 34 (1983), Issue 4

Conversion of decidious species by combination of mechanical and chemical processing, particulary from aspect of solving the problem of wood waste

Authors:

Mile Orešković

Keywords:

chemical wood processing and sawmilling; wood waste; wood briquettes from sawdust and baric; integral utilization of wood

Volume 34 (1983), Issue 5-6

The determing intensified efforts in sawmill production as a supposition for objectivization of complexity of work estimate

Authors:

Slavko Popijač

Keywords:

efforts at work; estimation of job; working conditions

Volume 34 (1983), Issue 1-2

Sociological and professional characteristics of workers and their influence on efficiency of work in sawmilling in region of Slavonia and Baranja

Authors:

Petar Madžarac

Keywords:

qualifying structure of workers; distance from place of residence to work place; labour turnover

Volume 32 (1981), Issue 1-2

Some observations to sawmilling problems in Yugoslavia

Authors:

Ivica Milinović

Keywords:

reconstruction and modernization of sawmills; supply of logs to the sawmills; optimum capacity of sawmill; winter felling of beech logs

Volume 32 (1981), Issue 1-2

Measurement and control of labour productivity in sawmills

Authors:

Bogomil Čop

Keywords:

measurement and control of labour productivity; conditional productivity unit

Volume 29 (1978), Issue 3-4

Comparative researches in production of sawn timber and purposively made wooden components

Authors:

Ramiz Zubčević

Keywords:

sawmilling of beech; dimension stock; standard sawn timber; quality-quantity and valuable coefficient of yield

Volume 28 (1977), Issue 11-12

Mehanizacija pilana za tvrdo drvo u SFRJ

Authors:

Marko Gregić

Keywords:

hardwood sawmill mechanization; sawmill capacity; classic sawmill technology; technology of wooden elements

Volume 27 (1976), Issue 9-10

High-strain linebar - best solution to growth - stressed timber resawing

Authors:

A. Krilov

Keywords:

high-strain linebar resaw; sawmill technology; growth stress

Volume 26 (1975), Issue 11-12

Utilization of sawmill capacities in S.R. Croatia

Authors:

Ivica Milinović

Keywords:

Analysis of Primary Value Chains in Slovenian Forest and Wood Bioeconomy

Quality and Dimensional Parameters of Large-Sized Pine Timber in View of Expectations of Polish Sawmill Industry

The Effect of Sapwood and Heartwood Differences on Mechanical Properties of Fast-Growing Tree Species

Influence of Bed Movement and Amount of Supplied Air on Updraft Gasification of Hardwood Pellet

Contribution to Research on Certain Production Costs by Investing into Computer Aided Technology of Production of Wooden Elements with Pre-Planing of Sawn Wood

Production Costs as a Basic Factor of Competitiveness of Softwood Sawmilling

Assessment of “Uso Fiume” Larch Beams Production in the Sawmilling Industry of Aosta Valley Region – Northwestern Italy

Forest Resources and Sawmill Structure of Kosovo: State of the Art and Perspectives

Noise Measurements in Timber Industries

Effectiveness of Asymmetrical Veneering with Hardwood Species of Varying Shrinkage and Porosity

Influence of the Sawing Method on Yield of Beech Logs with Red Heartwood

Lumber Recovery Efficiency among Selected Sawmills in Akure, Nigeria

Sawing Capacities in the Czech Republic

Estimation of technical efficiency in production technologies of Czech sawmills

Sawmilling in the Czech Republic

Sawmilling in Croatia Part 2 – Croatian Sawmilling in New Millennium

Quantity yield of European walnut sawlogs (Juglans regia L.) during sawmilling

Changes in moisture content during hardwood air-seasoning

Some characteristics of means of transport in sawmill storages

Hplc analysis of monosaccharides of some home grown wood species

Development of oak wood sawmilling (Part 2)

Development of oak wood sawmilling

Chemical and anatomical properties and possibility of firwood sawmill residue utilization for high-yield chemimechanical pulps production

Development of timber conversion and utilization of Slavonian oak and other hardwood species in Croatia from 1699 to 1984

Production of dimension stock in Yugoslav sawmills

Mechanization and automation in handling sawn timber in ports

Structure dimension tendency of sawmill conifer logs

Sawmilling technology development

Development of sawmill wood manufacture

Conversion of decidious species by combination of mechanical and chemical processing, particulary from aspect of solving the problem of wood waste

The determing intensified efforts in sawmill production as a supposition for objectivization of complexity of work estimate

Sociological and professional characteristics of workers and their influence on efficiency of work in sawmilling in region of Slavonia and Baranja

Some observations to sawmilling problems in Yugoslavia

Measurement and control of labour productivity in sawmills

Comparative researches in production of sawn timber and purposively made wooden components

Mehanizacija pilana za tvrdo drvo u SFRJ

High-strain linebar - best solution to growth - stressed timber resawing

Utilization of sawmill capacities in S.R. Croatia

Publisher