Archive

Volume 75 (2024), Issue 1

Integration of Sustainable Development Goals in Higher Education and Research Processes Related to Forestry and Wood Science

Authors:

Zala Uhan, Špela Pezdevšek Malovrh, Matej Jošt, Katarina Remic

Keywords:

sustainable development goals; forestry; wood science; education; research

Volume 75 (2024), Issue 2

A Benchmark for a New Nearly Zero Energy Wooden Building in Europe

Authors:

Erwin Schau, Eva Prelovšek Niemelä

Keywords:

benchmark; nearly zero energy building (nZEB); life cycle assessment (LCA); wood construction; environmental footprint

Volume 74 (2023), Issue 3

Physical and Chemical Properties of Highland Bamboo (Yushania alpina) Culms Grown in Ethiopia

Authors:

Mahadi Mussa, Getachew Desalegn, Gemechu Kaba, Anteneh Tesfaye

Keywords:

bamboo (Yushania alpina); basic density; cellulose; lignin; moisture content; shrinkage

Volume 74 (2023), Issue 3

Prediction of Optimum Veneer Drying Parameters with Artifi cial Neural Networks for Production of Plywood with High Mechanical Properties

Authors:

Hasan Ozturk

Keywords:

veneer drying temperature; moisture content; thermal conductivity; artificial neural network; plywood

Volume 74 (2023), Issue 2

Impact of Wood Moisture Content on Structural Integrity of Wood Under Dynamic Loads

Authors:

Lukas Emmerich, Christian Brischke

Keywords:

brittleness; High-Energy Multiple Impact (HEMI) test; moisture content; moisture states; resistance to impact milling (RIM)

Volume 73 (2022), Issue 2

Characterization of Formaldehyde Emission and Combustion Properties of Peanut (Arachis Hypogaea) Husk-Based Green Composite Panels for Building Applications

Authors:

Ersin Ercan, Musa Atar, Mustafa Kucuktuvek, Hakan Keskin

Keywords:

particleboard, peanut husk, combustion properties, formaldehyde emission, green building materials

Volume 72 (2021), Issue 3

Heat-Treated Wood Reinforced High Density Polyethylene Composites

Authors:

Kadir Karakuş, Deniz Aydemir, Gokhan Gunduz, Fatih Mengeloğlu

Keywords:

HDPE; wood flour; thermal modification; heat treatment; polymer composite

Volume 72 (2021), Issue 1

An Assessment of Environmental Impact on Glued Wood Building Elements

Authors:

Darius Albrektas, Ernestas Ivanauskas

Keywords:

glued wood (glulam); laminated veneer lumber; modulus of elasticity; coeffi cient of damping; wood defects

Volume 71 (2020), Issue 4

Weath ering Performance of Beech Wood Coated with Acrylic Paint Containing UV Stabilizers of Dihydroxy Benzophenone and Nano Zinc Oxide

Authors:

Mehrnaz Akbarnezhad, Davood Rasouli, Hossein Yousefi, Mahdi Mashkour

Keywords:

acrylic coating; weathering; beech wood; dihydroxy benzophenone and nano zinc oxide

Volume 71 (2020), Issue 3

Contribution to the Evaluation of Thermal Insulation Properties of a Simple and a Double Window in a Log building

Authors:

Petr Fait, Pavel Král, Josef Čech, Vladimir Linhart

Keywords:

simple window; double window; thermal insulation properties; heat transfer

Volume 71 (2020), Issue 4

Improving Weathering Performance of Wood by Borates Impregnation and Liquid Glass Coating

Authors:

Mustafa Kucuktuvek, Hilmi Toker, Turkay Turkoglu, Gokhan Gunduz, Ergun Baysal

Keywords:

weathering; boron compounds; liquid glass; wood coating; surface characteristics; building material

Volume 69 (2018), Issue 1

The Effects of Press Method and Coating Material Differences on the Properties of Medium Density Fiberboard

Authors:

Songül Kayış, İbrahim Bektaş, Ayşenur Kılıç

Keywords:

MDF; wrapping method; membrane method; high gloss PVC; mat PVC

Volume 68 (2017), Issue 1

Interrelationship between Static a nd Dynamic Strength Properties of Wood and its Structural Integrity

Authors:

Christian Brischke

Keywords:

bending strength; High-Energy Multiple Impact (HEMI) tests; impact bending strength; modulus of elasticity; Resistance to Impact Milling (RIM)

Volume 65 (2014), Issue 4

Properties of Modified Phenol-Formaldehyde Adhesive for Plywood Panels Manufactured from High Moisture Content Veneer

Authors:

Pavlo Bekhta, Galyna Ortynska, Jan Sedliacik

Keywords:

gluing; veneer; high moisture content; plywood; phenol-formaldehyde resin; modifying agents

Volume 64 (2013), Issue 1

Selected Wood Properties of Prunus Africana (Hook) Grown in Kenya as Possible Reasons for its High Natural Durability

Authors:

Francis Mburu, Peter Sirmah, Fred Muisu, Stéphane Dumarcay, Philippe Gérardin

Keywords:

Prunus africana; heartwood; extractives; fungi; inhibition

Volume 64 (2013), Issue 1

Influence of Gluing Technology on Physical and Mechanical Properties of Laminated Veneer Lumber

Authors:

Murčo Obućina, Goran Turk, Ejub Džaferović, Jože Resnik

Keywords:

laminated veneer lumber; hot gluing; high frequency gluing; physical properties; mechanical properties

Volume 64 (2013), Issue 1

Sustainable Development and Green Buildings

Authors:

Arijit Sinha, Rakesh Gupta, Andreja Kutnar

Keywords:

LEED; life cycle analysis; wood

Volume 63 (2012), Issue 3

Energy-Efficient Renovation Principles for Prefabricated Timber-Frame Residential Buildings

Authors:

Vesna Žegarac, Miroslav Premrov, Manja Kitek-Kuzman

Keywords:

timber building; glazing; energy efficiency; renovation

Volume 62 (2011), Issue 2

Assessment of Wood Surface Quality Obtained During High Speed Milling by Use of Non-Contact Method

Authors:

Vít Novák, Miroslav Rousek, Zdeněk Kopecký

Keywords:

high-speed milling; wood surface quality; roughness; waviness; shape; filter

Volume 61 (2010), Issue 1

Energy Characteristics of Wood-Chips Produced from Salix Viminalis - Clone ULV

Authors:

Ladislav Dzurenda, Jarmila Geffertova, Vladimir Hecl

Keywords:

higher heating value; lower heating value; salix wood and bark; wood chips; energy plantations

Volume 60 (2009), Issue 4

Perceptions & Use of Termite Resistant Treated Wood Products in the United States. Part II: The Perspective of Home Builders and Architects in Formosan Subterranean Termite Infected States

Authors:

Richard Vlosky, Todd Shupe, Qinglin Wu

Keywords:

termites; United States; treated wood; home builders; architects

Volume 59 (2008), Issue 2

Research of educational structure in wood processing and furniture production sector

Authors:

Darko Motik, Maja Moro, Renata Ojurović, Andreja Pirc Barčić, Herman Sušnik

Keywords:

wood sector; educational structure; high education

Volume 58 (2007), Issue 1

Methods for improving building wood properties

Authors:

Vlatka Jirouš-Rajković, Hrvoje Turkulin, Vjekoslav Živković

Keywords:

wood modification; heat-treated wood; acetylation; nano-coatings; wood-plastic composites; WPC

Volume 56 (2005), Issue 3

Monitoring of power consumption in high-speed milling

Authors:

Miroslav Rousek, Zdeněk Kopecký

Keywords:

wood machining; milling; high-speed; measurement; measuring stand

Volume 55 (2004), Issue 4

SWOT analysis - Information support for building development strategy of the Slovakian wood industry

Authors:

Andrea Sujova

Keywords:

wood industry; restructuralisation; SWOT analysis; SWOT matrix; strategic development

Volume 54 (2003), Issue 2

Influence of coating and colour on bacterial colonisation of fir-wood L-joints

Authors:

Radovan Despot, Jelena Trajković, Bogoslav Šefc, Marin Hasan

Keywords:

Fir-wood; L-joints; high build alkyd paint; medium build alkyd stain; bacterial activity

Volume 53 (2002), Issue 2

Research on antropometric characteristics of high school students and ergonomic characteristics of high school furniture

Authors:

Denis Jelačić, Krešimir Greger, Tomislav Grladinović

Keywords:

anthropometric characteristics; ergonomics; school furniture

Volume 52 (2001), Issue 2

The prospects of wood as a shipbuilding material in Croatia

Authors:

Izvor Grubišić, Radovan Despot, Jelena Trajković, Mladen Balić

Keywords:

shipbuilding wood; wooden ships and boats; building, maintenance and protection of wooden ships

Volume 51 (2000), Issue 4

Adhesion of water-borne acrylic and hybrid paint on wood treated with primers

Authors:

Hrvoje Turkulin, Klaus Richter, Jürgen Sell

Keywords:

spruce; durability; adhesion; primers; water-borne paints; hybrid paints; SEM microscopy

Volume 51 (2000), Issue 4

The dry rot fungus Serpula lacrymans - the major cause of wood decay in buildings

Authors:

Radovan Despot, Jelena Trajković, Bogoslav Šefc

Keywords:

Serpula lacrymans Wulfen: Fr.; Schroeter; dry rat fungi; wood preservatives; preservation methods

Volume 48 (1997), Issue 2

SEM study of the weathering effects on painted wood

Authors:

Hrvoje Turkulin, Martin Arnold, Hilary Derbyshire, Jürgen Sell

Keywords:

SEM; photodegradation; durability; wood finishing; water-borne coatings; solvent-borne coatings

Volume 45 (1994), Issue 4

Removing the original coating off a wooden substrate

Authors:

Vlatka Jirouš-Rajković

Keywords:

coating; paint stripping; sanding; scraping; chemical strippers

Volume 44 (1993), Issue 1

Safer paint - Water borne alternatives

Authors:

Eric Roy Miller

Keywords:

Volume 41 (1990), Issue 1-2

Research in adhesion performance of permanent elastic joints of galvanized sheets and veneers in course of time

Authors:

Mirko Gornik

Keywords:

veneering of galvanized sheets; joint adhesion; permanent high-elastic joints

Volume 39 (1988), Issue 5-6

Chemical and anatomical properties and possibility of firwood sawmill residue utilization for high-yield chemimechanical pulps production

Authors:

Tatjana Stevanović Janežić, Biljana Bujanović

Keywords:

firwood sawmill residue; Abies pectinata; chemical composition; anatomical properties; softwood chips; high-yield pulps; chemimechanical pulping; chemithermomechanical pulping; softwood sulfonation; quuinomethide; sulphonated lignin; better qualities CMP/CTMP

Volume 36 (1985), Issue 3-4

Building construction from glued timber in ČSSR

Authors:

Jindrich Frais

Keywords:

Volume 36 (1985), Issue 5-6

Fire retardant chemicals for increase of fire resistance of high density fibreboards manufactured by dry process and mdf boards

Authors:

Vladimir Bruči, Marina Tatalović

Keywords:

fire retardant agent; flame spread index

Volume 36 (1985), Issue 7-8

Timber buildings structures in the USSR

Authors:

Jindrich Frais

Keywords:

timber houses; glued beams; wallpanels in building construction

Volume 34 (1983), Issue 5-6

Higher profit out of small investments in the mills manufacturing woodbased panels

Authors:

Salah-Eldien Omer

Keywords:

measuring instruments; small investments; product quality; higher profit

Volume 32 (1981), Issue 7-8

Comparative testing of firmness and durability of glued joints in products of building trade

Authors:

Ivica Grbac, Zlatko Purgar, Boris Ljuljka, Andrija Bogner

Keywords:

firmness and durability of glued joints; surface finishing; breaking strength; accuracy of finishing; exposure to weather conditions

Volume 30 (1979), Issue 11-12

Manufacture and application of cementbonded particleboards

Authors:

Stjepan Petrović

Keywords:

cementbonded particleboards; Portland Cement; elastic-mechanical properties; high fire-resistant material

Volume 29 (1978), Issue 3-4

Thermal system of highly economical presses for surface finishing of boards

Authors:

František Setnička

Keywords:

wooden boards; finishing; waste heat of presses

Volume 29 (1978), Issue 7-8

Thermal high-frequency hardening of sawblade teeth

Authors:

A. Krilov

Keywords:

hardening of sawblade teeth; high-frequency hardening

Volume 27 (1976), Issue 9-10

High-strain linebar - best solution to growth - stressed timber resawing

Authors:

A. Krilov

Keywords:

high-strain linebar resaw; sawmill technology; growth stress

Integration of Sustainable Development Goals in Higher Education and Research Processes Related to Forestry and Wood Science

A Benchmark for a New Nearly Zero Energy Wooden Building in Europe

Physical and Chemical Properties of Highland Bamboo (Yushania alpina) Culms Grown in Ethiopia

Prediction of Optimum Veneer Drying Parameters with Artifi cial Neural Networks for Production of Plywood with High Mechanical Properties

Impact of Wood Moisture Content on Structural Integrity of Wood Under Dynamic Loads

Characterization of Formaldehyde Emission and Combustion Properties of Peanut (Arachis Hypogaea) Husk-Based Green Composite Panels for Building Applications

Heat-Treated Wood Reinforced High Density Polyethylene Composites

An Assessment of Environmental Impact on Glued Wood Building Elements

Weath ering Performance of Beech Wood Coated with Acrylic Paint Containing UV Stabilizers of Dihydroxy Benzophenone and Nano Zinc Oxide

Contribution to the Evaluation of Thermal Insulation Properties of a Simple and a Double Window in a Log building

Improving Weathering Performance of Wood by Borates Impregnation and Liquid Glass Coating

The Effects of Press Method and Coating Material Differences on the Properties of Medium Density Fiberboard

Interrelationship between Static a nd Dynamic Strength Properties of Wood and its Structural Integrity

Properties of Modified Phenol-Formaldehyde Adhesive for Plywood Panels Manufactured from High Moisture Content Veneer

Selected Wood Properties of Prunus Africana (Hook) Grown in Kenya as Possible Reasons for its High Natural Durability

Influence of Gluing Technology on Physical and Mechanical Properties of Laminated Veneer Lumber

Sustainable Development and Green Buildings

Energy-Efficient Renovation Principles for Prefabricated Timber-Frame Residential Buildings

Assessment of Wood Surface Quality Obtained During High Speed Milling by Use of Non-Contact Method

Energy Characteristics of Wood-Chips Produced from Salix Viminalis - Clone ULV

Perceptions & Use of Termite Resistant Treated Wood Products in the United States. Part II: The Perspective of Home Builders and Architects in Formosan Subterranean Termite Infected States

Research of educational structure in wood processing and furniture production sector

Methods for improving building wood properties

Monitoring of power consumption in high-speed milling

SWOT analysis - Information support for building development strategy of the Slovakian wood industry

Influence of coating and colour on bacterial colonisation of fir-wood L-joints

Research on antropometric characteristics of high school students and ergonomic characteristics of high school furniture

The prospects of wood as a shipbuilding material in Croatia

Adhesion of water-borne acrylic and hybrid paint on wood treated with primers

The dry rot fungus Serpula lacrymans - the major cause of wood decay in buildings

SEM study of the weathering effects on painted wood

Removing the original coating off a wooden substrate

Safer paint - Water borne alternatives

Research in adhesion performance of permanent elastic joints of galvanized sheets and veneers in course of time

Chemical and anatomical properties and possibility of firwood sawmill residue utilization for high-yield chemimechanical pulps production

Building construction from glued timber in ČSSR

Fire retardant chemicals for increase of fire resistance of high density fibreboards manufactured by dry process and mdf boards

Timber buildings structures in the USSR

Higher profit out of small investments in the mills manufacturing woodbased panels

Comparative testing of firmness and durability of glued joints in products of building trade

Manufacture and application of cementbonded particleboards

Thermal system of highly economical presses for surface finishing of boards

Thermal high-frequency hardening of sawblade teeth

High-strain linebar - best solution to growth - stressed timber resawing

Publisher