Archive

Volume 74 (2023), Issue 1

Structural and Design Values of Solid Timber Beams and Glued Laminated Timber Beams of Dipteryx panamensis and Hieronyma alchorneoides Wood from Fast-Growth Plantation

Authors:

Róger Moya, Carolina Tenorio, Angel Navarro-Mora, Freddy Munoz

Keywords:

tropical species; bending; shear; mezzanine; glulam; mass timber

Volume 74 (2023), Issue 1

Shear Force Capacities of H-Type Furniture Joints Constructed of Various Heat-Treated Wood Species

Authors:

Mehmet Acar, Engin Balikci, Tolga Kuskun, Ali Kasal, Ziya Yusuf Erdil

Keywords:

heat-treated wood; H-type joint; mortise and tenon joint; dowel joint; shear force capacity

Volume 74 (2023), Issue 4

Wood Species Image Classification Using Two-Dimensional Convolutional Neural Network

Authors:

Kenan Kiliç, Kürşat Kiliç, Brian Bino Sinaice, Uğur Özcan

Keywords:

2D convolutional neural network; image classification; deep neural network; wood species

Volume 74 (2023), Issue 4

Comparison of Reaction Wood and Normal Wood of Some Commercial Tree Species

Authors:

Sevinç Kaz, Saim Ateş, Tuba Külçe

Keywords:

pine; fir; oak; beech; anatomical and chemical structure

Volume 73 (2022), Issue 2

Effects of Wooden Dowel Species, Edge Banding Thickness, and Adhesive Types on Embedded Strength in Particleboard

Authors:

Abdurrahman Karaman

Keywords:

PUR-D4, PVC edge banding, embedded strength of dowel, particleboard, dowel

Volume 72 (2021), Issue 2

Evaluation of Creep Characteristics of Single- Staple Furniture Joints Made of Different Wood Species

Authors:

Samet Demirel, Seda Bas

Keywords:

creep; load level; single staple; wood joint

Volume 71 (2020), Issue 2

Optimal Surface Preparation for Wood Anatomy Research of Invasive Species by Scanning Electron Microscopy

Authors:

Maks Merela, Nejc Thaler, Angela Balzano, Denis Plavčak

Keywords:

wood anatomy; wood surface; scanning electron microscopy; SEM; invasive species; sample preparation

Volume 71 (2020), Issue 1

Anatomical, Chemical and Mechanical Characteristics of Beech Wood Degraded by Two Pleurotus Species

Authors:

Yaghoob Azimi, Mohsen Bahmani, Ali Jafari, Hamid Reza Riyahi Bakhtyari

Keywords:

Pleurotus cornucopiae; Pleurotus eryngii; Trametes versicolor; wood decay; chemical analysis; light microscopy

Volume 71 (2020), Issue 3

The Effect of Sapwood and Heartwood Differences on Mechanical Properties of Fast-Growing Tree Species

Authors:

İbrahim Bektaş, Ahmet Tutuş, Gamze Gültekin

Keywords:

mechanical properties; sapwood; heartwood; softwoods; hardwoods

Volume 71 (2020), Issue 3

Wood Surface Finishing of Selected Invasive Tree Species

Authors:

Matjaž Pavlič, Jure Žigon, Marko Petrič

Keywords:

coating; finishing; invasive tree species; oil; wood

Volume 70 (2019), Issue 2

Insect Species Damaging Industrial Wood in Western Black Sea Region of Turkey

Authors:

Mesut Yalçın, Çağlar Akçay, Cihat Taşçıoğlu, Beşir Yüksel

Keywords:

log depots; Turkey; Western Black Sea Region; wood-destroying insects; wood species

Volume 69 (2018), Issue 1

Assessment of Sorptive Properties of Selected Tropical Wood Species

Authors:

Agnieszka Jankowska

Keywords:

equilibrium moisture content; tropical wood; sorption; flooring

Volume 68 (2017), Issue 4

Surface Wettability of Wood Species from Tropical and Temperate Zones by Polar and Dispersive Liquids

Authors:

Agnieszka Laskowska, Paweł Kozakiewicz

Keywords:

contact angle; diiodomethane; surface free energy; water; wettability

Volume 68 (2017), Issue 1

Modelling of Drying Curves of Spruce, Beech, Willow and Alder Particles

Authors:

Krzysztof Górnicki, Agnieszka Kaleta, Andrzej Bryś, Radosław Winiczenko

Keywords:

wood species; particles; drying kinetics; drying temperature; modelling

Volume 68 (2017), Issue 1

Determination of Screw Withdrawal Resistance of Some Heat-Treated Wood Species

Authors:

Osman Perçin, Şekip Şadiye Yasar, Mustafa Altunok, Oğuzhan Uzun

Keywords:

heat treatment; black pine; hornbeam; Uludağ fir; screw withdrawal resistance

Volume 66 (2015), Issue 1

Impact of Wood Species, Dimensions and Drying Temperature on Sorption Behaviour of Wood

Authors:

Darius Albrektas, Kristina Ukvalbergienė

Keywords:

drying temperature; adsorption; desorption; moisture content; sorption hysteresis; water vapour

Volume 65 (2014), Issue 2

Influence of Various Wood Species and Cross-Sections on Strength of a Dowel Welding Joint

Authors:

Ivica Župčić, Zoran Vlaović, Danijela Domljan, Ivica Grbac

Keywords:

welding of wood; dowel joints; withdrawal strength; embedded force; wood species; anatomical orientation

Volume 65 (2014), Issue 2

Effectiveness of Asymmetrical Veneering with Hardwood Species of Varying Shrinkage and Porosity

Authors:

Sylwia Olenska, Pawel Tarcicki, Mariusz L. Mamiński, Piotr Beer

Keywords:

asymmetrical veneering; wood-based panels; deformations; shrinkage; porosity

Volume 64 (2013), Issue 4

Mechanical properties of sapwood versus heartwood, in three different oak species

Authors:

Maks Merela, Katarina Čufar

Keywords:

oak; Quercus; sapwood; heartwood; properties; density; bending strength; modulus of elasticity; Brinell hardness

Volume 63 (2012), Issue 2

Shrinkage of Grand Fir Wood and its Variability within the Stem

Authors:

Jiří Lukášek, Aleš Zeidler, Štefan Barcík

Keywords:

Grand fir (Abies grandis /Douglas/ Lindl.); shrinkage; density; introduced species; variability

Volume 61 (2010), Issue 3

MDF/HDF Production from Plantation Wood Species

Authors:

Tibor Alpár, Tibor Fáczán, István Rácz, Gabor Kátoli

Keywords:

MDF; HDF; wood plantation; Pannonia poplar; I214 poplar; black locust; Austrian pine; fiberboard production; physical aspects of MDF/HDF boards

Volume 60 (2009), Issue 4

Estimating the extent of influence of two intrinsic fuelwood properties on acceptance/retention of some woody species in agroforestry practices in southwest Nigeria

Authors:

Andrew Erakhrumen

Keywords:

agroforestry; biomass; biofuel; fuelwood; net calorific value; species selectivity; specific gravity; prioritization; sub-Sahara Africa

Volume 60 (2009), Issue 4

Effect of Feed Speed and Wood Species on Roughness of Machined Surface

Authors:

Nedim Škaljić, Ružica Beljo Lučić, Anka Ozana Čavlović, Murčo Obućina

Keywords:

surface roughness; wood planing; feed speed; wood species

Volume 54 (2003), Issue 3

The natural durability of industrial important European wood species in different use classes

Authors:

Andreas Rapp, Ulrike Augusta

Keywords:

natural durability; hazard classes; European wood species; field tests

Volume 53 (2002), Issue 4

Wood species, sanding direction and efficiency of a sanding belt

Authors:

Alena Očkajová, J. Terenòvá

Keywords:

wood species; sanding direction; sanding time; wear of sanding belt

Volume 51 (2000), Issue 3

Contribution to the research of the bark properties of several wood species

Authors:

Stanislav Bađun

Keywords:

bark; density; hardness; beech; hornbeam; oak; ash; poplar; fir

Volume 51 (2000), Issue 2

lmpact of UV-rays on stain durability of various wood species

Authors:

Vesna Tišler, Marija Ruparčić, Vladimir Sertić

Keywords:

UV-rays; tannin; stain; copper compound; iron compound; complex compound; colour system

Volume 44 (1993), Issue 1

Hplc analysis of monosaccharides of some home grown wood species

Authors:

Vesna Tišler

Keywords:

Monosaccharides; hardwoods; hydrolysis; liquid chromatography

Volume 42 (1991), Issue 3-4

Influence of various species of wood on physical and mechanical properties of three-layer chipboards

Authors:

Ilija Panjković, Vladimir Bruči

Keywords:

Volume 38 (1987), Issue 9-10

Development of timber conversion and utilization of Slavonian oak and other hardwood species in Croatia from 1699 to 1984

Authors:

Marko Gregić

Keywords:

forest exploitation; sawmilling and chemical processing of wood; woodworking; development of timber industry in Croatia

Volume 37 (1986), Issue 9-10

Particleboards from various phytogenic materials

Authors:

Salah-Eldien Omer

Keywords:

species of phytogenic secondary materials; finished boards properties

Volume 36 (1985), Issue 11-12

Contribution to research into bark properties of some species of wood

Authors:

Stanislav Bađun

Keywords:

bark; density; hardness

Volume 34 (1983), Issue 4

Conversion of decidious species by combination of mechanical and chemical processing, particulary from aspect of solving the problem of wood waste

Authors:

Mile Orešković

Keywords:

chemical wood processing and sawmilling; wood waste; wood briquettes from sawdust and baric; integral utilization of wood

Volume 33 (1982), Issue 11-12

Some experiences obtained in testing glued-laminated structural members

Authors:

Salah-Eldien Omer

Keywords:

laminated structural members; species for laminating; quality of glue joints; method of test; factors influencing the quality

Volume 31 (1980), Issue 5-6

Reestablishment of evidences and comparisons of business results in woodworking industry

Authors:

Bogomil Čop

Keywords:

conversion costs by species of wood and sawing methods; calculation of mills; comparison of business systems

Volume 30 (1979), Issue 11-12

Contribution to investigation of influence of some factors on impact bending of some important commercial wood species

Authors:

Stanislav Bađun

Keywords:

impact bending; influence of specific gravity and the moisture content

Structural and Design Values of Solid Timber Beams and Glued Laminated Timber Beams of Dipteryx panamensis and Hieronyma alchorneoides Wood from Fast-Growth Plantation

Shear Force Capacities of H-Type Furniture Joints Constructed of Various Heat-Treated Wood Species

Wood Species Image Classification Using Two-Dimensional Convolutional Neural Network

Comparison of Reaction Wood and Normal Wood of Some Commercial Tree Species

Effects of Wooden Dowel Species, Edge Banding Thickness, and Adhesive Types on Embedded Strength in Particleboard

Evaluation of Creep Characteristics of Single- Staple Furniture Joints Made of Different Wood Species

Optimal Surface Preparation for Wood Anatomy Research of Invasive Species by Scanning Electron Microscopy

Anatomical, Chemical and Mechanical Characteristics of Beech Wood Degraded by Two Pleurotus Species

The Effect of Sapwood and Heartwood Differences on Mechanical Properties of Fast-Growing Tree Species

Wood Surface Finishing of Selected Invasive Tree Species

Insect Species Damaging Industrial Wood in Western Black Sea Region of Turkey

Assessment of Sorptive Properties of Selected Tropical Wood Species

Surface Wettability of Wood Species from Tropical and Temperate Zones by Polar and Dispersive Liquids

Modelling of Drying Curves of Spruce, Beech, Willow and Alder Particles

Determination of Screw Withdrawal Resistance of Some Heat-Treated Wood Species

Impact of Wood Species, Dimensions and Drying Temperature on Sorption Behaviour of Wood

Influence of Various Wood Species and Cross-Sections on Strength of a Dowel Welding Joint

Effectiveness of Asymmetrical Veneering with Hardwood Species of Varying Shrinkage and Porosity

Mechanical properties of sapwood versus heartwood, in three different oak species

Shrinkage of Grand Fir Wood and its Variability within the Stem

MDF/HDF Production from Plantation Wood Species

Estimating the extent of influence of two intrinsic fuelwood properties on acceptance/retention of some woody species in agroforestry practices in southwest Nigeria

Effect of Feed Speed and Wood Species on Roughness of Machined Surface

The natural durability of industrial important European wood species in different use classes

Wood species, sanding direction and efficiency of a sanding belt

Contribution to the research of the bark properties of several wood species

lmpact of UV-rays on stain durability of various wood species

Hplc analysis of monosaccharides of some home grown wood species

Influence of various species of wood on physical and mechanical properties of three-layer chipboards

Development of timber conversion and utilization of Slavonian oak and other hardwood species in Croatia from 1699 to 1984

Particleboards from various phytogenic materials

Contribution to research into bark properties of some species of wood

Conversion of decidious species by combination of mechanical and chemical processing, particulary from aspect of solving the problem of wood waste

Some experiences obtained in testing glued-laminated structural members

Reestablishment of evidences and comparisons of business results in woodworking industry

Contribution to investigation of influence of some factors on impact bending of some important commercial wood species

Publisher