Archive

Volume 74 (2023), Issue 1

Shear Force Capacities of H-Type Furniture Joints Constructed of Various Heat-Treated Wood Species

Authors:

Mehmet Acar, Engin Balikci, Tolga Kuskun, Ali Kasal, Ziya Yusuf Erdil

Keywords:

heat-treated wood; H-type joint; mortise and tenon joint; dowel joint; shear force capacity

Volume 73 (2022), Issue 1

Tensile Performance of Traditional and Modern Corner Joints in Wooden Structures

Authors:

Musa Atar, Fazli Gode, Mustafa Kucuktuvek, Asli Er Akan, Hilal Tugba Ormecioglu, Hakan Keskin

Keywords:

tensile performance; construction materials; corner joints; wooden joints

Volume 73 (2022), Issue 4

Identification of Defective Joints in Beams via Torsional Vibration

Authors:

Mostafa Kohantorabi, Alireza Asgari, Mona Shayestehkia, Mobina Kohantorabi

Keywords:

joint; prediction; defect; torsional vibration; beech; adhesive

Volume 73 (2022), Issue 1

Diagonal Tension Performance of Impregnated Woodworking Corner Joints

Authors:

Şemsettin Doruk

Keywords:

paraffin; linseed oil; Imersol-Aqua; diagonal tension; woodworking corner joints

Volume 73 (2022), Issue 1

Reinforcement of Joints Between LVL Members with GFRP and Finite Element Analysis

Authors:

Mosayeb Dalvand, Ghanbar Ebrahimi, Kambiz Pourtahmasi

Keywords:

veneer lumber; glass fiber reinforced polymer; finite element method; failure modes

Volume 72 (2021), Issue 2

Dependence of Dowel Joint Strength on Welding Temperature in Rotary Welding

Authors:

Ivica Župčić, Ivan Žulj, Ivica Grbac, Kristijan Radmanović

Keywords:

welding of wood; embedded force; temperature in rotary welding; dowel joints

Volume 72 (2021), Issue 2

Evaluation of Creep Characteristics of Single- Staple Furniture Joints Made of Different Wood Species

Authors:

Samet Demirel, Seda Bas

Keywords:

creep; load level; single staple; wood joint

Volume 71 (2020), Issue 2

Numerical Modelling of Stiffness of RTA Furniture with New Externally Invisible and Dismountable Joints

Authors:

Łukasz Krzyżaniak, Jerzy Smardzewski, Silvana Prekrat

Keywords:

furniture; FEM; invisible joints; RTA; stiffness

Volume 71 (2020), Issue 1

Preferences of Different Target Groups of Consumers in Case of Furniture Purchase

Authors:

Leon Oblak, Branko Glavonjić, Andreja Pirc Barčić, Petra Grošelj, Teja Bizjak Govedič

Keywords:

marketing; buying decision process; furniture; conjoint analysis

Volume 70 (2019), Issue 3

Influence of Air Humidity Variation on Strength of Rotary Welded Dowel Joints of Pinewood

Authors:

Ivan Žulj, Ivica Župčić, Ivica Grbac

Keywords:

welding solid wood; Scots pine (Pinus sylvestris L.); dowels; strength of welded joints; weld factors; embedded force; the impact of humidity on wood; wood moisture content

Volume 69 (2018), Issue 3

The Impact of Nanoparticles and Moisture Content on Bonding Strength of Urea Formaldehyde Resin Adhesive

Authors:

Timuçin Bardak, Eser Sozen, Kadir Kayahan, Selahattin Bardak

Keywords:

nanoparticles; urea formaldehyde; moisture content; lap joint shear strength; bonding strength

Volume 67 (2016), Issue 4

Design Methodology of New Furniture Joints

Authors:

Marcin Podskarbi, Jerzy Smardzewski, Krzysztof Moliński, Marta Molińska-Glura

Keywords:

furniture; joints; design; brief; cluster analysis

Volume 67 (2016), Issue 2

Simulating Strength Behaviors of Corner Joints of Wood Constructions by Using Finite Element Method

Authors:

Bulent Kaygin, Huseyin Yorur, Burhanettin Uysal

Keywords:

Finite Element Method (FEM); ANSYS/LS-DYNA; wood; strain gauge; wooden corner joints; dowel; mortise; tenon

Volume 67 (2016), Issue 2

Examination of Decision Factors in the Process of Buying Kitchen Furniture Using Conjoint Analysis

Authors:

Branko Liker, Lidija Zadnik Stirn, Dominika Gornik Bučar, Jasna Hrovatin

Keywords:

kitchen furniture; buying decision process; conjoint analysis

Volume 67 (2016), Issue 1

Mechanical Properties of Finger-Jointed Wood from Composite Utility Poles Made of Small Diameter Timber

Authors:

Cheng Piao, Todd Shupe

Keywords:

bamboo; finger-joints; poles; small diameter timber

Volume 65 (2014), Issue 2

Influence of Various Wood Species and Cross-Sections on Strength of a Dowel Welding Joint

Authors:

Ivica Župčić, Zoran Vlaović, Danijela Domljan, Ivica Grbac

Keywords:

welding of wood; dowel joints; withdrawal strength; embedded force; wood species; anatomical orientation

Volume 64 (2013), Issue 4

The fracture moment of corner joints bonded by different glues

Authors:

Jasna Hrovatin, Anton Zupančič, Milan Šernek, Leon Oblak

Keywords:

window; construction; joint; wood; glue

Volume 63 (2012), Issue 4

Bending Capacity of Middle Joints of Upholstered Furniture Frames

Authors:

Vasiliki Kamperidou, Vasileios Vasileiou

Keywords:

bending moment capacity; corner block joint; dowel joint; gusset plate joint; middle joint; mortise and tenon joint; upholstered furniture frame

Volume 63 (2012), Issue 3

Quality of Corner Joints of Beech Chairs under Load

Authors:

Silvana Prekrat, Jerzy Smardzewski, Mladen Brezović, Stjepan Pervan

Keywords:

wood constructions; sitting furniture; chair joints; strength of glued beechwood joints; round mortise and tenon

Volume 62 (2011), Issue 2

Welding Time as an Important Factor of Beech Welding

Authors:

Ivica Župčić, Andrija Bogner, Ivica Grbac

Keywords:

welding of beech; welding time; strength of the welded joint; dowels; embedded force

Volume 62 (2011), Issue 1

Influence of Thermal Modification of Beech on the Strength of Longitudinally Connected Turned Elements by Rotational Welding Method

Authors:

Ivica Župčić, Marko Mijaković, Ivica Grbac

Keywords:

beech; welding of solid and modified wood; strength of welded joints; longitudinal bonding

Volume 61 (2010), Issue 3

Numerical Analysis of Stress and Strain in a Wooden Chair

Authors:

Izet Horman, Seid Hajdarević, Sandra Martinović, Nikola Vukas

Keywords:

corner joint; chair; displacement; stress; wood; numerical analysis

Volume 61 (2010), Issue 4

Effect of Glueline Shape on Strength of Mortise and Tenon Joint

Authors:

Silvana Prekrat, Jerzy Smardzewski

Keywords:

gluelin; mortise and tenon joint; numerical analysis; wood

Volume 60 (2009), Issue 4

Scientific Methods for Determination of Wooden Corner Joint Designs

Authors:

Silvana Prekrat, Nikola Španić

Keywords:

furniture; wooden construction joint; rigidity; computational models

Volume 58 (2007), Issue 2

Strength and durability of glued wood Part two: Glue joint strength testing methods

Authors:

Goran Mihulja, Andrija Bogner

Keywords:

glued joint; type and shape of specimen; gluing strength; surface failure area; specimen deformation

Volume 57 (2006), Issue 3

Investigations of gluing quality of laminated window profiles

Authors:

Štefo Šorn, Andrija Bogner

Keywords:

composite material; laminated elements; strength of gluing; length joint; widening; quality of laminated; elements

Volume 56 (2005), Issue 2

Strength and durability of glued wood Part one: Factors of glued joint strength

Authors:

Goran Mihulja, Andrija Bogner

Keywords:

adhesion; glued joint; adhesives; substrate; glued joint strength; fracture area

Volume 55 (2004), Issue 2

Nonlinear strength model of an eccentric joint mandrel

Authors:

Jerzy Smardzewski, Silvana Prekrat

Keywords:

digital image correlation; joint; numerical model; mathematical model

Volume 54 (2003), Issue 2

Influence of coating and colour on bacterial colonisation of fir-wood L-joints

Authors:

Radovan Despot, Jelena Trajković, Bogoslav Šefc, Marin Hasan

Keywords:

Fir-wood; L-joints; high build alkyd paint; medium build alkyd stain; bacterial activity

Volume 50 (1999), Issue 2

Strength of end-grain finger joints in beech-wood

Authors:

Stjepan Tkalec, Silvana Prekrat, Bojana Dalbelo Bašić, Dejan Jalžabetić

Keywords:

wood constructions; finger joints; static loading; bending strength; modulis of elasticity

Volume 49 (1998), Issue 3

Mechanism of infection of fir wood joinery; Part 2: Sequence and intensity of attack of microorganisms

Authors:

Radovan Despot

Keywords:

Fir-wood joinery; L-joints; preservation; bacterial and fungal colonisation; biodeterioration; wood decay

Volume 49 (1998), Issue 2

Mechanism of infection of fir wood joinery; Part 1: Exposure conditions, moisture content and permeability

Authors:

Radovan Despot

Keywords:

Fir-wood; L-joints; exterior joinery; moisture content; permeability; preservation

Volume 48 (1997), Issue 4

Testing the strength of beech (Fagus sylvatica L.) and pine corner joints (Pinus sylvestris L.)

Authors:

Ivica Grbac, Stjepan Tkalec, Želimir Ivelić

Keywords:

joint fittings; static load strength; beech and pine furniture

Volume 48 (1997), Issue 2

Beechwood finger-joints applied at an angle

Authors:

Stjepan Tkalec, Silvana Prekrat, Marko Žmire

Keywords:

wood constructions for furniture; finger joints; static and dynamic loadings; resistance of the joints

Volume 48 (1997), Issue 1

Strength of joints in chairs made of beech and pine

Authors:

Stjepan Tkalec, Silvana Prekrat

Keywords:

technical design; chair structure; glued wood joints; joint strength

Volume 47 (1996), Issue 4

Testing the joint strength of wooden rests on bed frames

Authors:

Stjepan Tkalec, Ivica Grbac, Silvana Prekrat

Keywords:

wood constructions; beds; adhesive strength; joint-holding; strength; screw/dowel-holding strength

Volume 47 (1996), Issue 2

Improving the Glued Joint Strength by Modifying the Beechwood (Fagus sylvatica L) with Gamma Rays

Authors:

Andrija Bogner, Boris Ljuljka, Ivica Grbac

Keywords:

gamma rays irradiated beechwood; wetting angle; glued joint strength

Volume 43 (1992), Issue 1

Strength test on corner joints of doors width filling

Authors:

Stjepan Tkalec

Keywords:

drvne konstrukcije; spajanje klinastim zupcima; vrata ormara; čvrstoća lijepljenja

Volume 41 (1990), Issue 1-2

Strength test on round tenon joints

Authors:

Stjepan Tkalec

Keywords:

wood frames; joining by tenons; pressing into of tenons; strength of gluing

Volume 41 (1990), Issue 1-2

Research in adhesion performance of permanent elastic joints of galvanized sheets and veneers in course of time

Authors:

Mirko Gornik

Keywords:

veneering of galvanized sheets; joint adhesion; permanent high-elastic joints

Volume 41 (1990), Issue 9-10

Research on change of fire resistance of steel galvanized metal sheet doors after being veneered on both surfaces

Authors:

Mirko Gornik

Keywords:

fire resistance; veneer paneling; glued joints

Volume 41 (1990), Issue 5-6

Modification of wood surface for the purpose of a better gluing

Authors:

Andrija Bogner

Keywords:

modification of joint; wetting; gluing; roughness; penetration; joint strength

Volume 39 (1988), Issue 9-10

The comparison of shear strength of glued joint made by urea-formaldehyde and some mineral adhesives

Authors:

Milanka Điporović, Jovan Miljković

Keywords:

Volume 38 (1987), Issue 3-4

Bonding of beech and fir wood by activating the joint surface with natrium hydroxide applying the lignin based fillers

Authors:

Andrija Bogner, Hrvoje Turkulin, Vladimir Sertić, Boris Ljuljka

Keywords:

activation of wood surface with natrium hydroxide; lignin based filler; bonding of solid beech and fir

Volume 33 (1982), Issue 11-12

Some experiences obtained in testing glued-laminated structural members

Authors:

Salah-Eldien Omer

Keywords:

laminated structural members; species for laminating; quality of glue joints; method of test; factors influencing the quality

Volume 32 (1981), Issue 7-8

Comparative testing of firmness and durability of glued joints in products of building trade

Authors:

Ivica Grbac, Zlatko Purgar, Boris Ljuljka, Andrija Bogner

Keywords:

firmness and durability of glued joints; surface finishing; breaking strength; accuracy of finishing; exposure to weather conditions

Volume 31 (1980), Issue 7-8

Gluing time of veneers as function of the temperature change intensity in the joints

Authors:

Murat Backović

Keywords:

time of glue hardening; chemical and physical changes in joints; time of the loss of capacity of glue hardening; temperature flow in the joints; intensity of temperature changes in the joints; coefficient of temperature conductivity

Volume 31 (1980), Issue 11-12

Hardware and quality of furniture

Authors:

Dragutin Puzak, Božidar Sinković

Keywords:

rear joints on chair by means of screws; joint strength testing; static and dynamic strains

Volume 30 (1979), Issue 1-2

Calculation of furniture strength (1)

Authors:

Natalija Štorga, Miljenko Jurjević, Radoslav Jeršić

Keywords:

analysis of construction of furniture; calculation of joint strength; load and strength of panel elements of furniture

Volume 30 (1979), Issue 3

Calculation of furniture strength (2)

Authors:

Natalija Štorga, Miljenko Jurjević, Radoslav Jeršić

Keywords:

analysis of construction of furniture; calculation of joint strength; load and strength of panel elements of furniture

Volume 30 (1979), Issue 4

Durability of joints glued with PVA adhesives under exterior conditions

Authors:

Boris Ljuljka, Željko Šonje

Keywords:

durability of glued joints; water-resistance of adhesives; strength of joints

Bending Moment of Mortise-and-Tenon Joints in a Crossed Chair Base

Shear Force Capacities of H-Type Furniture Joints Constructed of Various Heat-Treated Wood Species

Tensile Performance of Traditional and Modern Corner Joints in Wooden Structures

Identification of Defective Joints in Beams via Torsional Vibration

Diagonal Tension Performance of Impregnated Woodworking Corner Joints

Reinforcement of Joints Between LVL Members with GFRP and Finite Element Analysis

Dependence of Dowel Joint Strength on Welding Temperature in Rotary Welding

Evaluation of Creep Characteristics of Single- Staple Furniture Joints Made of Different Wood Species

Numerical Modelling of Stiffness of RTA Furniture with New Externally Invisible and Dismountable Joints

Preferences of Different Target Groups of Consumers in Case of Furniture Purchase

Influence of Air Humidity Variation on Strength of Rotary Welded Dowel Joints of Pinewood

The Impact of Nanoparticles and Moisture Content on Bonding Strength of Urea Formaldehyde Resin Adhesive

Design Methodology of New Furniture Joints

Simulating Strength Behaviors of Corner Joints of Wood Constructions by Using Finite Element Method

Examination of Decision Factors in the Process of Buying Kitchen Furniture Using Conjoint Analysis

Mechanical Properties of Finger-Jointed Wood from Composite Utility Poles Made of Small Diameter Timber

Influence of Various Wood Species and Cross-Sections on Strength of a Dowel Welding Joint

The fracture moment of corner joints bonded by different glues

Bending Capacity of Middle Joints of Upholstered Furniture Frames

Quality of Corner Joints of Beech Chairs under Load

Welding Time as an Important Factor of Beech Welding

Influence of Thermal Modification of Beech on the Strength of Longitudinally Connected Turned Elements by Rotational Welding Method

Numerical Analysis of Stress and Strain in a Wooden Chair

Effect of Glueline Shape on Strength of Mortise and Tenon Joint

Scientific Methods for Determination of Wooden Corner Joint Designs

Strength and durability of glued wood Part two: Glue joint strength testing methods

Investigations of gluing quality of laminated window profiles

Strength and durability of glued wood Part one: Factors of glued joint strength

Nonlinear strength model of an eccentric joint mandrel

Influence of coating and colour on bacterial colonisation of fir-wood L-joints

Strength of end-grain finger joints in beech-wood

Mechanism of infection of fir wood joinery; Part 2: Sequence and intensity of attack of microorganisms

Mechanism of infection of fir wood joinery; Part 1: Exposure conditions, moisture content and permeability

Testing the strength of beech (Fagus sylvatica L.) and pine corner joints (Pinus sylvestris L.)

Beechwood finger-joints applied at an angle

Strength of joints in chairs made of beech and pine

Testing the joint strength of wooden rests on bed frames

Improving the Glued Joint Strength by Modifying the Beechwood (Fagus sylvatica L) with Gamma Rays

Strength test on corner joints of doors width filling

Strength test on round tenon joints

Research in adhesion performance of permanent elastic joints of galvanized sheets and veneers in course of time

Research on change of fire resistance of steel galvanized metal sheet doors after being veneered on both surfaces

Modification of wood surface for the purpose of a better gluing

The comparison of shear strength of glued joint made by urea-formaldehyde and some mineral adhesives

Bonding of beech and fir wood by activating the joint surface with natrium hydroxide applying the lignin based fillers

Some experiences obtained in testing glued-laminated structural members

Comparative testing of firmness and durability of glued joints in products of building trade

Gluing time of veneers as function of the temperature change intensity in the joints

Hardware and quality of furniture

Calculation of furniture strength (1)

Calculation of furniture strength (2)

Durability of joints glued with PVA adhesives under exterior conditions

Publisher