Archive

Volume 75 (2024), Issue 1

Development of Laminated Flooring Using Wood and Waste Tire Rubber Composites: A Study on Physical-Mechanical Properties

Authors:

Sima Sepahvand, Mohammad Rezvani, Mohammad Ghofrania, Fathi Leila, Ghanbar Ebrahimi

Keywords:

silica nanoparticles; rubber waste; plywood; physical-mechanical properties; flooring

Volume 74 (2023), Issue 3

Improving Surface Quality of Resin Impregnated Paper Used for Laminated Flooring Overlaid

Authors:

Meltem Cengiz Önal, Ahmet Gençer, Tülin Gürkan Polat, Abdullah Sütçü

Keywords:

melamine-faced laminate; surface modification; experiment design; functional coating

Volume 74 (2023), Issue 1

Synthesis of Phenolic Resin Reinforced with TiO2 Nanoparticles and its Effect on Combustion Performance of Laminated Veneer Lumber (LVL)

Authors:

Günay Özbay, Musa Atar, Ayhan Ozcifci

Keywords:

adhesive; combustion; FT-IR; nano-chemicals; TiO2 nanoparticles

Volume 74 (2023), Issue 3

Optimization of Production Parameters of Densified Laminated Veneer Lumber Produced by Using Urea-Formaldehyde Resin

Authors:

Saadettin Murat Onat, Serkan Özdemir

Keywords:

densification; laminated veneer lumber; urea formaldehyde; processing parameters; Taguchi method based grey relational analysis

Volume 74 (2023), Issue 1

Structural and Design Values of Solid Timber Beams and Glued Laminated Timber Beams of Dipteryx panamensis and Hieronyma alchorneoides Wood from Fast-Growth Plantation

Authors:

Róger Moya, Carolina Tenorio, Angel Navarro-Mora, Freddy Munoz

Keywords:

tropical species; bending; shear; mezzanine; glulam; mass timber

Volume 74 (2023), Issue 1

Utilization of Scots Pine (Pinus sylvestris L.) Timber with Defects in Production of Engineered Wood Products

Authors:

Daniel Koynov, Miglena Valyova, Emiliyan Parzhov, Lee Seng Hua

Keywords:

Pinus sylvestris L.; engineered wood; knots; cross-laminated timber (CLT); solid wood panels

Volume 72 (2021), Issue 1

Bending Characteristics of Laminated Wood Composites Made of Poplar Wood and GFRP

Authors:

Mehmet Nuri Yildrim, Abdurrahman Karaman, Mustafa Zor

Keywords:

poplar; wood laminate; bending strength; modulus of elasticity

Volume 72 (2021), Issue 1

An Assessment of Environmental Impact on Glued Wood Building Elements

Authors:

Darius Albrektas, Ernestas Ivanauskas

Keywords:

glued wood (glulam); laminated veneer lumber; modulus of elasticity; coeffi cient of damping; wood defects

Volume 72 (2021), Issue 4

Finite Element Analysis of Dynamic Characteristics and Bending Stiffness for Cross Laminated Timber Floor Panels with and without Openings

Authors:

Ljiljana Kozarić, Smilja Bursać, Martina Vojnić Purčar, Miroslav Bešević, Žikica Tekić

Keywords:

cross laminated timber floors; bending stiffness; floors with openings; finite element analysis

Volume 70 (2019), Issue 4

Eco-Friendly Laminated Strand Lumber from Date Palm Rachis: Analysis of Mechanical Properties by Taguchi Design of Experiment

Authors:

Masoud Shafie, Hamid Zarea-Hosseinabadi

Keywords:

date palm rachis; structural composite lumber; laminated strand lumber; Taguchi design of experiments; mechanical properties

Volume 70 (2019), Issue 3

Vibrations of Cross-Laminated Timber Floors

Authors:

Ljiljana Kozarić, Martina Vojnić Purčar, Smilja Živković

Keywords:

cross-laminated timber; floor construction; vibrations

Volume 70 (2019), Issue 1

Stress and Strain Analysis of Plywood Seat Shell

Authors:

Seid Hajdarević, Murčo Obućina, Elmedin Mešić, Sandra Martinović

Keywords:

laminated wood; seat shell; tensometric measuring; strain gauges; stress; strain; FEM

Volume 69 (2018), Issue 1

Method of Estimation of Laminated Wood Properties

Authors:

Mladen Brezović, Stjepan Pervan, Josipa Petrak, Silvana Prekrat

Keywords:

veneer plywood; bending strength; modulus of elasticity; thickness of veneer plate; property estimation

Volume 68 (2017), Issue 4

Cross Laminated Timber (CLT) as an Alternative Form of Construction Wood

Authors:

Marek Wieruszewski, Bartłomiej Mazela

Keywords:

wood construction material; Cross Laminated Timber

Volume 67 (2016), Issue 1

Influence of Feed Speed on the Content of Fine Dust during Cutting of Two-Side-Laminated Particleboards

Authors:

Luďka Hlásková, Tomasz Rogoziński, Zdeněk Kopecký

Keywords:

wood dust; particle-size distribution; circular saw blade; two-side-laminated particleboard

Volume 65 (2014), Issue 3

The Influence of Cyclic Loading on Ultimate Bending Strength of Beech Solid and Laminated Wood

Authors:

Milan Gaff, Miroslav Gašparík, Štefan Barcík

Keywords:

cyclic loading; laminated wood; solid wood; ultimate bending strength; beech wood; PVAC adhesive

Volume 64 (2013), Issue 1

Influence of Gluing Technology on Physical and Mechanical Properties of Laminated Veneer Lumber

Authors:

Murčo Obućina, Goran Turk, Ejub Džaferović, Jože Resnik

Keywords:

laminated veneer lumber; hot gluing; high frequency gluing; physical properties; mechanical properties

Volume 61 (2010), Issue 3

Glued Laminated Timber in Architecture

Authors:

Manja Kitek-Kuzman, Leon Oblak, Srečko Vratuša

Keywords:

wood structure; glued laminated timber (glulam); structural elements; composite

Volume 58 (2007), Issue 1

Glued laminated panels as kitchen countertops

Authors:

Kambiz Pourtahmasi, Asghar Tarmian, Mazdak Mojarradi

Keywords:

32 mm thick MDF; 38 mm thick particleboard; glued laminated panel; kitchen countertop

Volume 57 (2006), Issue 3

Investigations of gluing quality of laminated window profiles

Authors:

Štefo Šorn, Andrija Bogner

Keywords:

composite material; laminated elements; strength of gluing; length joint; widening; quality of laminated; elements

Volume 53 (2002), Issue 4

Influence of juvenile spruce-wood on longitudinal deformations of laminated wood elements

Authors:

Janez Čadež, Jože Resnik, Katarina Košmelj

Keywords:

juvenile and adult wood; spruce wood; PVA adhesive; gluing; bowing

Volume 53 (2002), Issue 1

Temperature fields in windows

Authors:

Dunja Martinović, Izet Horman

Keywords:

window; temperature; finite volume method

Volume 49 (1998), Issue 1

Development of production, properties and application of OSB boards

Authors:

Vladimir Bruči, Vladimir Jambreković

Keywords:

Wood based panels; Wafer board (WB); Oriented strand board (OSB); Laminated strand Lumber (LSL); quality of OSB; use of OSB

Volume 44 (1993), Issue 2

Physical and mechanical properties of extruded and laminated extruded particleboards

Authors:

Vladimir Bruči

Keywords:

extruded particleboards; laminated extruded particleboards; physical and mechanical properties; perforation value; thickness; density; water absorption; swelling

Volume 43 (1992), Issue 3

Effect of some technological parameters on the gluing quality of laminated window profiles

Authors:

Stjepan Petrović

Keywords:

gluing; laminated windows; delamination

Volume 42 (1991), Issue 3-4

Architectonic and technological aspects of cyclic windows, doors and glass walls

Authors:

Mirko Gornik, Jure Popović

Keywords:

facade elements; cyclic openings; cyclic windows

Volume 41 (1990), Issue 9-10

Construction of bridges on forest roads by use of laminated wood

Authors:

Ninoslav Lovrić

Keywords:

laminated wood; roads; construction of wood bridges

Volume 36 (1985), Issue 11-12

Research into the possibility of the production of glue-laminated electro-conducting poles

Authors:

Stjepan Petrović, Slavko Kovačević, Salah-Eldien Omer, Ilija Stjepčević

Keywords:

glue laminated wooden poles; resorcin-phenol-formaldehyde glue

Volume 33 (1982), Issue 11-12

Some experiences obtained in testing glued-laminated structural members

Authors:

Salah-Eldien Omer

Keywords:

laminated structural members; species for laminating; quality of glue joints; method of test; factors influencing the quality

Volume 32 (1981), Issue 7-8

Windows testing in West Germany

Authors:

Luka Jereb

Keywords:

characteristic fit; air escape; specific air escape; resistance to driving rain

Volume 32 (1981), Issue 9-10

Resistance of plywood to pressure and compression perpendicular to sheet surface in laminated constructions

Authors:

M. M. Guskov

Keywords:

resistance to pressure and compression; laminated buliding constrrictions; deformation of linear-elastic layer; surface roughness module of surface deformation

Volume 32 (1981), Issue 11-12

Technological conditions contributing to the quality of wood laminated constructions

Authors:

Ladislav Lesić

Keywords:

wood laminated constructions; technological characteristics and quality of wood laminated constructions

Volume 31 (1980), Issue 7-8

Contribution to examination of influences of some technological factors on the quality of wood gluing

Authors:

Stjepan Petrović, Vladimir Ferdelji

Keywords:

laminated wood structures; factorial plan of experiment; level of the factor influence; shearing strength; penetration of glue into the wood; significance of the factor influence

Volume 30 (1979), Issue 7-8

Decorative plastic laminates for postforming manufactured by acetoguanamine additive

Authors:

Jože Lenič, Josef Seeholzer

Keywords:

plastic laminates for postforming; production of round-edged furniture; properties of impregnation and flowing of resins; plastic laminated properties

Volume 28 (1977), Issue 7-8

Influential parameters on laminated particleboards quality in shorttact treatment

Authors:

Stjepan Petrović

Keywords:

laminating particleboards in shorttact treatment; experiment factors plan; hardening degree and resistance to wearing; explained part of factors influence

Volume 28 (1977), Issue 11-12

Use of glued prestressed wooden material in civil engineering structures

Authors:

Ninoslav Lovrić

Keywords:

glulam ( glued-laminated) prestressed wooden material; beams of glulam prestressed wood; creep in the wood

Development of Laminated Flooring Using Wood and Waste Tire Rubber Composites: A Study on Physical-Mechanical Properties

Improving Surface Quality of Resin Impregnated Paper Used for Laminated Flooring Overlaid

Synthesis of Phenolic Resin Reinforced with TiO2 Nanoparticles and its Effect on Combustion Performance of Laminated Veneer Lumber (LVL)

Optimization of Production Parameters of Densified Laminated Veneer Lumber Produced by Using Urea-Formaldehyde Resin

Structural and Design Values of Solid Timber Beams and Glued Laminated Timber Beams of Dipteryx panamensis and Hieronyma alchorneoides Wood from Fast-Growth Plantation

Utilization of Scots Pine (Pinus sylvestris L.) Timber with Defects in Production of Engineered Wood Products

Bending Characteristics of Laminated Wood Composites Made of Poplar Wood and GFRP

An Assessment of Environmental Impact on Glued Wood Building Elements

Finite Element Analysis of Dynamic Characteristics and Bending Stiffness for Cross Laminated Timber Floor Panels with and without Openings

Eco-Friendly Laminated Strand Lumber from Date Palm Rachis: Analysis of Mechanical Properties by Taguchi Design of Experiment

Vibrations of Cross-Laminated Timber Floors

Stress and Strain Analysis of Plywood Seat Shell

Method of Estimation of Laminated Wood Properties

Cross Laminated Timber (CLT) as an Alternative Form of Construction Wood

Influence of Feed Speed on the Content of Fine Dust during Cutting of Two-Side-Laminated Particleboards

The Influence of Cyclic Loading on Ultimate Bending Strength of Beech Solid and Laminated Wood

Influence of Gluing Technology on Physical and Mechanical Properties of Laminated Veneer Lumber

Glued Laminated Timber in Architecture

Glued laminated panels as kitchen countertops

Investigations of gluing quality of laminated window profiles

Influence of juvenile spruce-wood on longitudinal deformations of laminated wood elements

Temperature fields in windows

Development of production, properties and application of OSB boards

Physical and mechanical properties of extruded and laminated extruded particleboards

Effect of some technological parameters on the gluing quality of laminated window profiles

Architectonic and technological aspects of cyclic windows, doors and glass walls

Construction of bridges on forest roads by use of laminated wood

Research into the possibility of the production of glue-laminated electro-conducting poles

Some experiences obtained in testing glued-laminated structural members

Windows testing in West Germany

Resistance of plywood to pressure and compression perpendicular to sheet surface in laminated constructions

Technological conditions contributing to the quality of wood laminated constructions

Contribution to examination of influences of some technological factors on the quality of wood gluing

Decorative plastic laminates for postforming manufactured by acetoguanamine additive

Influential parameters on laminated particleboards quality in shorttact treatment

Use of glued prestressed wooden material in civil engineering structures

Publisher