Archive

Volume 75 (2024), Issue 2

Volume 75 (2024), Issue 3

Optimization of Energy Consumption During Industrial Veneer Drying – A Preliminary Assessment

Authors:

Qing Qiu, Julie Cool

Keywords:

data-driven approach; minimize energy cost; maximize quality turnout; veneer drying case study; process improvement

Volume 75 (2024), Issue 1

Efficiency Assessment Based on Data Envelopment Analysis for Occupational Accidents and Diseases in Furniture Industry of Turkey

Authors:

Devrim Karademir

Keywords:

DEA; data envelopment analysis; non-parametric evaluation methods; work accident and occupational health; furniture industry

Volume 75 (2024), Issue 1

Environmental Assessment/Evaluation of 3D Printing and 3D Printing with Wood-PLA Composites - Case Study

Authors:

Teja Bizjak Govedič, Daša Krapež Tomec, Manja Kitek-Kuzman, Leon Oblak, Branko Glavonjić

Keywords:

life cycle assessment; 3D printing; environmental impact; carbon footprint; wood-PLA composite

Volume 75 (2024), Issue 1

Assessment of Condition of Wooden Mill in Kovačevići Area in Bosnia and Herzegovina

Authors:

Boštjan Lesar, Redžo Hasanagić, Mohsen Bahmani, Miha Humar

Keywords:

cultural heritage; technical heritage; wood; non-destructive assessment; decay

Volume 75 (2024), Issue 1

Effect of Natural Weathering on Performance of Wood Flour-Recycled Polypropylene Composites

Authors:

Saeed Kazemi Najafi, Sima Hatami Naderloo, Behbood Mohebby

Keywords:

wood plastic composites; recycled polypropylene; natural weathering; discoloration, surface roughness

Volume 74 (2023), Issue 1

Effects of Medium Density Fiberboards (MDF) Recycling Methods on Fiber Dimensions and Some Reconstructed Board Properties

Authors:

Çagri Olgun, Saim Ateş, Emre Uzer

Keywords:

waste MDF; recycling; recycled fibers; fiber properties; board strenght

Volume 72 (2021), Issue 3

Investigation of the Effect of Using Activated Sludge Treated with Acetic Acid on Physical and Strength Properties of Recycled Pulp

Authors:

Naghmeh Amani, Ramin Vaysi, Abdollah Najafi, Seyed Eshagh Ebadi

Keywords:

activated sludge; acetic acid; newsprint paper; eco-friendly bio composite; resistance features

Volume 72 (2021), Issue 1

An Assessment of Environmental Impact on Glued Wood Building Elements

Authors:

Darius Albrektas, Ernestas Ivanauskas

Keywords:

glued wood (glulam); laminated veneer lumber; modulus of elasticity; coeffi cient of damping; wood defects

Volume 71 (2020), Issue 4

Effects of Recycled Fiber Fines on Hand Sheet Properties of Different Unbeaten and Beaten Pulps

Authors:

Sezgin Koray Gülsoy, Saffet Uysal

Keywords:

Populus tremula L.; Pinus brutia Ten.; recycled fiber; kraft; fines; pulp and paper properties

Volume 71 (2020), Issue 3

Durability and Mechanical Performance of Differently Treated Glulam Beams during Two Years of Outdoor Exposure

Authors:

Davor Kržišnik, Samo Grbec, Boštjan Lesar, Denis Plavčak, Aleš Straže, Milan Šernek, Bogdan Šega, Miha Humar

Keywords:

degradation; glulam; mechanical testing; performance; service life; wood

Volume 71 (2020), Issue 2

Comparison of Visual and Instrumental Assessment of Colour Differences on Finished Wooden Surfaces

Authors:

Matjaž Pavlič, Marko Petrič

Keywords:

coating; colour; gloss; instrumental measurement; visual perception

Volume 70 (2019), Issue 4

Assessment of Efficacy and Effectiveness of Some Extracted Bio-Chemicals as Bio-Fungicides on Wood

Authors:

Mohamed Z. M. Salem, Safa Abd El-Kader Mohamed Hamed, Maisa M. A. Mansour

Keywords:

bio-fungicides; wood; essential oils; extracts; antifungal activity

Volume 70 (2019), Issue 2

Thermal Stability of Wood Fibers Produced from Recycled Medium Density Fiberboards

Authors:

Mohammad Ahmadi, Bita Moezzipour, Aida Moezzipour

Keywords:

thermal stability; recycled fibers; MDF; electrical heating; hydrothermal

Volume 70 (2019), Issue 1

Comparison of Surface Quality and Tool-Life of Glulam Window Elements after Planing

Authors:

Michal Dobrzynski, Kazimierz A. Orlowski, Michal Biskup

Keywords:

planing process; pine wood; window frame; surface quality; 2D/3D surface texture

Volume 69 (2018), Issue 2

Assessment of Mechanical and Morphological Properties of New Poly Lactic Acid (PLA) / Wood Fibers / Nanographene Composite

Authors:

Mojtaba Asadi, Behzad Bazyar, Amir Hooman Hemmasi, Ismail Ghsemi, Mohammad Talaeipoor

Keywords:

Polylactic acid; wood fiber; nanographene; mechanical properties

Volume 69 (2018), Issue 1

Assessment of Sorptive Properties of Selected Tropical Wood Species

Authors:

Agnieszka Jankowska

Keywords:

equilibrium moisture content; tropical wood; sorption; flooring

Volume 69 (2018), Issue 1

Lightweight Flat Pressed Wood Plastic Composites: Possibility of Manufacture and Properties

Authors:

Pavlo Lyutyy, Pavlo Bekhta, Galyna Ortynska

Keywords:

lightweight wood plastic composites; recycled low density polyethylene; expanded polystyrene; wood particles; lamination

Volume 68 (2017), Issue 4

Coatings for Use on Wooden Bicycle Frames – Applicability, Test Methods and Artificial Weathering Results

Authors:

Fabian Wulf, Moritz Sanne, Alexander Pfriem

Keywords:

wooden bicycle; wood coating; durability; artificial weathering; salt spray

Volume 67 (2016), Issue 3

An Exploratory Assessment of FSC Chain of Custody Certification Benefits in Croatian Wood Industry

Authors:

Kristina Klarić, Krešimir Greger, Miljenko Klarić, Tomislav Andrić, Miloš Hitka, Jože Kropivšek

Keywords:

forest certification schemes; the Republic of Croatia; wood industry; benefits of certification;; FSC®; CoC

Volume 67 (2016), Issue 2

Effects of Different Kinds of Coating Materials on Properties of Flat Pressed WPC Panels

Authors:

Pavlo Bekhta, Pavlo Lyutyy, Galyna Ortynska

Keywords:

coating materials; flat pressing; recycled polyethylene; veneer; wood plastic composites

Volume 67 (2016), Issue 1

Effect of Press Cycle Time on Application Behavior of Board Made from Chemically Modified Particles

Authors:

Maryam Ghorbani, Fatemeh Bavaneghi

Keywords:

press time; acetylation; particleboard; thickness swelling; mechanical strength; decay resistance

Volume 66 (2015), Issue 2

Assessment of “Uso Fiume” Larch Beams Production in the Sawmilling Industry of Aosta Valley Region – Northwestern Italy

Authors:

Corrado Cremonini, Francesco Negro, Manuela Romagnoli, Roberto Zanuttini

Keywords:

Structural timber; larch; CE marking; Uso Fiume beams; sawmills; Aosta Valley

Volume 65 (2014), Issue 2

Software “Image J” Application in Evaluating the Quality of Extracted Raw Wood Assortments

Authors:

Miloš Gejdoš, Jozef Suchomel, Marek Potkány

Keywords:

raw wood assortments; quality of extracted wood; wood qualitative characters; automated quality assessment

Volume 65 (2014), Issue 1

An Estimation of Dynamic Modulus of Elasticity in Cantilever Flexural Timber Beams

Authors:

Mehran Roohnia

Keywords:

assessment; cantilever beam; flexural; nondestructive technique (NDT); Timoshenko; vibration; wood

Volume 64 (2013), Issue 2

Natural Durability of Timber Exposed Above Ground – a Survey

Authors:

Christian Brischke, Linda Meyer, Gry Alfredsen, Miha Humar, Lesley Francis, Per-Otto Flæte, Pia Larsson-Brelid

Keywords:

durability classes; field tests; resistance factor; service life prediction; test methodology; use class 3

Volume 64 (2013), Issue 1

Sustainable Development and Green Buildings

Authors:

Arijit Sinha, Rakesh Gupta, Andreja Kutnar

Keywords:

LEED; life cycle analysis; wood

Volume 62 (2011), Issue 2

Assessment of Wood Surface Quality Obtained During High Speed Milling by Use of Non-Contact Method

Authors:

Vít Novák, Miroslav Rousek, Zdeněk Kopecký

Keywords:

high-speed milling; wood surface quality; roughness; waviness; shape; filter

Volume 58 (2007), Issue 2

Adjustment of employee evaluation in wood processing company Zvolen Corp.

Authors:

Miloš Hitka, Veronika Kuchárová Mačkayová, Mária Sirotiaková

Keywords:

assessment criteria; system of assessment; employee assessment; company management

Volume 55 (2004), Issue 3

Impact of forestry and wood industry as components of carbon cycle on climate change

Authors:

Ankica Kos Pervan, Dubravko Horvat, Juro Čavlović, Stjepan Risović

Keywords:

climate change; carbon accumulation; biomass; forestry; wood industry

Volume 55 (2004), Issue 1

Salary system aplication on example of industrial wood processing

Authors:

Jozo Bogdanović

Keywords:

salary; point value; stimulation; work assessment; production quantity; enveloping exploitation of logs

Volume 53 (2002), Issue 4

Recycled paper – the influence of digital prints

Authors:

Branka Lozo, Ivana Bolanča, Zdenka Bolanča, Damir Modrić

Keywords:

Recycled fibres; mechanical properties; tensile strength; tearing resistance; bursting resistance; digital offset printing; conventional offset printing

Volume 50 (1999), Issue 4

Characteristic planning models for products and production programs in furniture manufacturing

Authors:

Darko Motik

Keywords:

models of planning products; life cycle curve

Volume 47 (1996), Issue 1

Influence of life cycle function on furniture industry products

Authors:

Darko Motik

Keywords:

product life cycle curve; product life cycle phases; products market duration

Volume 46 (1995), Issue 3

Assessment of Wood Photodegradation by Microtensile Testing

Authors:

Hilary Derbyshire, Eric Roy Miller, Jürgen Sell, Hrvoje Turkulin

Keywords:

softwoods; photodegradation; tensile strength; SEM; fractography

Volume 39 (1988), Issue 5-6

Cybernetic control system methods in computer aided manufacture of furniture - Method II.

Authors:

Zvonimir Ettinger

Keywords:

Cybernetic control system; computer; orgware; hardware; lifeware; software; electronic control of production process

Volume 39 (1988), Issue 3-4

Cybernetic control system methods in computer aided manufacture of furniture - 1st method

Authors:

Zvonimir Ettinger

Keywords:

cybernetic control system method; computers; orgware; hardware; lifeware; software; electronic control of manufacturing process

Volume 32 (1981), Issue 1-2

Determination of the workmanship cycles in furniture production

Authors:

Stjepan Tkalec

Keywords:

production cycle; workmanship cycle; discontinued and continued workmanship process; coefficient of flow; interval estimate of waiting the mean value; regressive analysis; constructive and technological complexlty of production

A Benchmark for a New Nearly Zero Energy Wooden Building in Europe

Optimization of Energy Consumption During Industrial Veneer Drying – A Preliminary Assessment

Efficiency Assessment Based on Data Envelopment Analysis for Occupational Accidents and Diseases in Furniture Industry of Turkey

Environmental Assessment/Evaluation of 3D Printing and 3D Printing with Wood-PLA Composites - Case Study

Assessment of Condition of Wooden Mill in Kovačevići Area in Bosnia and Herzegovina

Effect of Natural Weathering on Performance of Wood Flour-Recycled Polypropylene Composites

Effects of Medium Density Fiberboards (MDF) Recycling Methods on Fiber Dimensions and Some Reconstructed Board Properties

Investigation of the Effect of Using Activated Sludge Treated with Acetic Acid on Physical and Strength Properties of Recycled Pulp

An Assessment of Environmental Impact on Glued Wood Building Elements

Effects of Recycled Fiber Fines on Hand Sheet Properties of Different Unbeaten and Beaten Pulps

Durability and Mechanical Performance of Differently Treated Glulam Beams during Two Years of Outdoor Exposure

Comparison of Visual and Instrumental Assessment of Colour Differences on Finished Wooden Surfaces

Assessment of Efficacy and Effectiveness of Some Extracted Bio-Chemicals as Bio-Fungicides on Wood

Thermal Stability of Wood Fibers Produced from Recycled Medium Density Fiberboards

Comparison of Surface Quality and Tool-Life of Glulam Window Elements after Planing

Assessment of Mechanical and Morphological Properties of New Poly Lactic Acid (PLA) / Wood Fibers / Nanographene Composite

Assessment of Sorptive Properties of Selected Tropical Wood Species

Lightweight Flat Pressed Wood Plastic Composites: Possibility of Manufacture and Properties

Coatings for Use on Wooden Bicycle Frames – Applicability, Test Methods and Artificial Weathering Results

An Exploratory Assessment of FSC Chain of Custody Certification Benefits in Croatian Wood Industry

Effects of Different Kinds of Coating Materials on Properties of Flat Pressed WPC Panels

Effect of Press Cycle Time on Application Behavior of Board Made from Chemically Modified Particles

Assessment of “Uso Fiume” Larch Beams Production in the Sawmilling Industry of Aosta Valley Region – Northwestern Italy

Software “Image J” Application in Evaluating the Quality of Extracted Raw Wood Assortments

An Estimation of Dynamic Modulus of Elasticity in Cantilever Flexural Timber Beams

Natural Durability of Timber Exposed Above Ground – a Survey

Sustainable Development and Green Buildings

Assessment of Wood Surface Quality Obtained During High Speed Milling by Use of Non-Contact Method

Adjustment of employee evaluation in wood processing company Zvolen Corp.

Impact of forestry and wood industry as components of carbon cycle on climate change

Salary system aplication on example of industrial wood processing

Recycled paper – the influence of digital prints

Characteristic planning models for products and production programs in furniture manufacturing

Influence of life cycle function on furniture industry products

Assessment of Wood Photodegradation by Microtensile Testing

Cybernetic control system methods in computer aided manufacture of furniture - Method II.

Cybernetic control system methods in computer aided manufacture of furniture - 1st method

Determination of the workmanship cycles in furniture production

Publisher