Archive

Volume 74 (2023), Issue 2

Volume 74 (2023), Issue 3

Physical and Chemical Properties of Highland Bamboo (Yushania alpina) Culms Grown in Ethiopia

Authors:

Mahadi Mussa, Getachew Desalegn, Gemechu Kaba, Anteneh Tesfaye

Keywords:

bamboo (Yushania alpina); basic density; cellulose; lignin; moisture content; shrinkage

Volume 74 (2023), Issue 3

Prediction of Optimum Veneer Drying Parameters with Artifi cial Neural Networks for Production of Plywood with High Mechanical Properties

Authors:

Hasan Ozturk

Keywords:

veneer drying temperature; moisture content; thermal conductivity; artificial neural network; plywood

Volume 73 (2022), Issue 1

Effect of Acetylation and Accelerated Weathering of Nigerian Grown Rubberwood (Hevea brasiliensis, Müll. Arg.) on Equilibrium Moisture Content and Colour Change

Authors:

Samuel Oluyinka Olaniran

Keywords:

rubberwood; equilibrium moisture content; moisture ratio; acetylation; accelerated weathering

Volume 73 (2022), Issue 2

Modelling and Investigating Real-World Drying Defects in Wood

Authors:

Darius Albrektas, Agne Styraite

Keywords:

wood moisture content; drying defects; resonant frequency; amplitude characteristics; transverse vibrations; modulus of elasticity; coefficient of damping

Volume 73 (2022), Issue 3

Initial Desorption of Reaction Beech Wood

Authors:

Jerzy Majka, Maciej Sydor, Jakub Prentki, Magdalena Zborowska

Keywords:

equilibrium moisture content; kiln-drying; response surface methodology; Fagus sylvatica L.; sorption isotherms; reaction wood; tension wood; opposite wood

Volume 73 (2022), Issue 3

Influence of Moisture Content on Cutting Parameters and Fracture Characteristics of Spruce and Oak Wood

Authors:

Luďka Hanincová, Jiří Procházka, Vít Novák, Zdeněk Kopecký

Keywords:

cutting force; feed force; fracture toughness; shear yield strength; moisture content

Volume 72 (2021), Issue 2

Effect of Soaking/Oven- Drying on Mechanical and Physical Properties of Birch (Betula spp.) Plywood

Authors:

Regino Kask, Harri Lille, Mihkel Kiviste

Keywords:

plywood; bending strength; modulus of elasticity; thickness swelling; restore dimensions; moisture content; X-Ray technique

Volume 71 (2020), Issue 2

Characterisation and Modelling of Drying Kinetics of Thin Ash and Oak Wood Lamellas Dried with Infrared Radiation and Hot Air

Authors:

Aleš Straže, Miljenko Klarić, Zlatko Budrović, Stjepan Pervan

Keywords:

wood drying kinetics; hot air drying; infrared drying; moisture diffusion

Volume 70 (2019), Issue 3

The Effect of Mat Layers Moisture Content on Some Properties of Particleboard

Authors:

Abdullah Istek, Ufuk Aydin, Ismail Ozlusoylu

Keywords:

wood-based panels; particleboard; mat moisture content; properties

Volume 70 (2019), Issue 3

The Effect of Thermo-Mechanical Treatment of Moso Bamboo (Phyllostachys Pubescens) on Its Sorption and Physicomechanical Properties

Authors:

Przemysław Mania, Jerzy Majka, Magdalena Zborowska

Keywords:

dynamic vapor sorption; equilibrium moisture content; sorption properties; Brinell hardness; GAB model; sorption hysteresis

Volume 70 (2019), Issue 3

Influence of Air Humidity Variation on Strength of Rotary Welded Dowel Joints of Pinewood

Authors:

Ivan Žulj, Ivica Župčić, Ivica Grbac

Keywords:

welding solid wood; Scots pine (Pinus sylvestris L.); dowels; strength of welded joints; weld factors; embedded force; the impact of humidity on wood; wood moisture content

Volume 70 (2019), Issue 1

Investigation of Friction Coefficients of Veneers as a Function of Fibre Direction and Moisture Content

Authors:

Beate Buchelt, André Wagenführ

Keywords:

veneer; friction; friction coefficients; wood moulded parts

Volume 69 (2018), Issue 3

The Impact of Nanoparticles and Moisture Content on Bonding Strength of Urea Formaldehyde Resin Adhesive

Authors:

Timuçin Bardak, Eser Sozen, Kadir Kayahan, Selahattin Bardak

Keywords:

nanoparticles; urea formaldehyde; moisture content; lap joint shear strength; bonding strength

Volume 69 (2018), Issue 1

Assessment of Sorptive Properties of Selected Tropical Wood Species

Authors:

Agnieszka Jankowska

Keywords:

equilibrium moisture content; tropical wood; sorption; flooring

Volume 66 (2015), Issue 1

Impact of Wood Species, Dimensions and Drying Temperature on Sorption Behaviour of Wood

Authors:

Darius Albrektas, Kristina Ukvalbergienė

Keywords:

drying temperature; adsorption; desorption; moisture content; sorption hysteresis; water vapour

Volume 66 (2015), Issue 4

Finite Changes of Bound Water Moisture Content in a Given Volume of Beech Wood

Authors:

Richard Hrčka

Keywords:

beech wood; diffusion coefficient; moisture content

Volume 66 (2015), Issue 3

Change of Wood Moisture Content During Artificial Light Irradiation and its Influence on Colour Measurement

Authors:

Jan Baar, Jitka Ondroušková, Peter Rademacher

Keywords:

colour; conditioning; moisture content; light irradiation

Volume 65 (2014), Issue 4

Properties of Modified Phenol-Formaldehyde Adhesive for Plywood Panels Manufactured from High Moisture Content Veneer

Authors:

Pavlo Bekhta, Galyna Ortynska, Jan Sedliacik

Keywords:

gluing; veneer; high moisture content; plywood; phenol-formaldehyde resin; modifying agents

Volume 65 (2014), Issue 2

Specific Heat Capacity of Wood

Authors:

Kristijan Radmanović, Igor Đukić, Stjepan Pervan

Keywords:

specific heat capacity; wood; moisture content; temperature

Volume 64 (2013), Issue 4

Evaluation of Material Characteristics of Xylite – Part 1. Influence of Moisture Content on Some Mechanical Properties

Authors:

Željko Gorišek, Aleš Straže

Keywords:

xylite; moisture content; modulus of elasticity; modulus of rupture; shear strength; hardness

Volume 64 (2013), Issue 2

Standardized Methods for Determining and Estimating Wood Moisture Content in the Republic of Croatia

Authors:

Stjepan Pervan, Miljenko Klarić, Marko Slivar

Keywords:

Wood moisture content; oven-dry method; electrical method; capacitance method

Volume 63 (2012), Issue 3

Drying Kinetics of Poplar (Populus Deltoides) Wood Particles by a Convective Thin Layer Dryer

Authors:

Hamid Zarea Hosseinabadi, Kazem Doosthosseini, Mohammad Layeghi

Keywords:

Poplar wood particles; thin layer dryer; drying kinetics model; effective moisture diffusivity; activation energy

Volume 63 (2012), Issue 2

Research of Temperature and Moisture during Sitting on Office Chairs

Authors:

Zoran Vlaović, Danijela Domljan, Ivica Grbac

Keywords:

office chair; seating; comfort; temperature; moisture; PU-foam; design; constructions

Volume 62 (2011), Issue 4

Sorption Models and Creation of Precision Diagrams for the Equilibrium Moisture Content

Authors:

Nencho Deliiski

Keywords:

wood sorption models; mathematical description; equilibrium moisture content; temperature; relative humidity; model-based control

Volume 61 (2010), Issue 1

Analysis of Selected Mechanical Properties of Construction Wood KVH and Parallam 2.0 E

Authors:

Jaroslav Hrázský, Pavel Král

Keywords:

construction materials; construction wood KVH; Parallam; bending strength; modulus of elasticity in bending; tensile strength; compression strength; density; moisture content

Volume 59 (2008), Issue 3

Development of Innovative Particleboard Panels

Authors:

Francesco Balducci, Charles Harper, Peter Meinlschmidt, Brigitte Dix, Alfredo Sanasi

Keywords:

lightweight particleboards; annual/perennial farm plants; wood chips; binder; mechanical and moisture related properties

Volume 55 (2004), Issue 2

Viscoelasticity characteristics of wood at the change of moisture content

Authors:

Murčo Obućina, Ejub Džaferović, Jože Resnik

Keywords:

viskoelasticity; wood; creep; models

Volume 54 (2003), Issue 4

Changes of moisture content during air-seasoning of beechwood

Authors:

Stjepan Pervan, Andrej Bublić, Stjepan Ostroški, Zvonimir Merlić

Keywords:

air-seasoning; beechwood; final moisture content; drying time

Volume 51 (2000), Issue 2

Numerical evaluation of beechwood discolouration during drying

Authors:

Željko Gorišek, Aleš Straže, Iztok Ribič

Keywords:

discolouration; beechwood (Fagus silvatica L.); drying; moisture content; CIELab system

Volume 51 (2000), Issue 1

Influence of veneer moisture content on shear strength of plywood adhesive bond

Authors:

Jože Resnik, Milan Šernek

Keywords:

peeled beech veneer; melamine-urea-formaldehyde adhesive; hot gluing; gluebond shear strength

Volume 49 (1998), Issue 2

Mechanism of infection of fir wood joinery; Part 1: Exposure conditions, moisture content and permeability

Authors:

Radovan Despot

Keywords:

Fir-wood; L-joints; exterior joinery; moisture content; permeability; preservation

Volume 49 (1998), Issue 1

Research into thermal conductivity and moisture permeability of different mattress structures

Authors:

Ivica Grbac, Bojana Dalbelo Bašić

Keywords:

quality of sleeping; mattress structures; thermal conductivity; moisture permeability; upholstery materials

Volume 49 (1998), Issue 1

Research on final moisture content as a factor of wood drying quality

Authors:

Stjepan Pervan, Ivica Grbac, Ljiljana Luketić

Keywords:

oakwood dimension parts; drying quality; moisture content

Volume 47 (1996), Issue 3

Establishment of specific drying energy of oak-wood flooring deal and thermodynamic model of drying

Authors:

Miljenko Primorac, Stjepan Risović

Keywords:

drying energy of wood; specific energy of wood drying; irreversible heat engine; thermodynamic model of wood proceses; capillary diameters of wood structure; moisture of wood and structural openings; heat of evaporation

Volume 47 (1996), Issue 1

Development of moisture content distribution in sapwood and heartwood during initial stages of drying

Authors:

Georg Bohner, Markus Sacker

Keywords:

Spruce; drying; heartwood; sapwood

Volume 45 (1994), Issue 4

Thermal conductivity and moisture permeability in mattress

Authors:

Ivica Grbac, Bojana Dalbelo Bašić

Keywords:

thermal conductivity; moisture permeability; mattress structure; mattress quality

Volume 45 (1994), Issue 2

Changes in moisture content during hardwood air-seasoning

Authors:

Zdenko Pavlin, Stjepan Pervan, M. Špoljarić

Keywords:

air-seasoning; hardwoods; final moisture content; drying time

Volume 43 (1992), Issue 3

Relation between emission formaldehyd value from MDF-boards determinated by perforation and diffusion method

Authors:

Đurđica Trninić, Vladimir Jambreković, Damir Žuntar

Keywords:

MDF-boards E 1 class; free formaldehyde emission; perforator and WKI-24 method

Volume 43 (1992), Issue 2

Climate and natural wood drying

Authors:

Tomislav Dimitrov

Keywords:

climate; natural wood drying; lignoisohygres; equilibrium moisture content of wood; oscillation

Volume 43 (1992), Issue 1

Heat and moisture content transfer in the mat during particleboard pressing

Authors:

Vilko Rajman, Jadranko Jahić, Izet Horman

Keywords:

particleboard; temperature; moisture content; transient heat and moisture content transfer

Volume 42 (1991), Issue 1-2

Some physical properties of fir-wood from Gorski kotar

Authors:

Tomislav Sinković

Keywords:

fir-wood; density of oven dry wood; fiber saturation point; volumetric shrinkage; moisture content after felling

Volume 39 (1988), Issue 7-8

Effect of moisture and temperature upon the compression strength parallel to grains of wood

Authors:

Branko Kolin

Keywords:

compression strength; moisture of wood; temperature

Volume 38 (1987), Issue 1-2

Movement of moisture in decorative preservative protected wood

Authors:

Velimir Šćukanec, Božidar Petrić

Keywords:

decorative wood preservative; moisture movement in wood

Volume 38 (1987), Issue 5-6

Electric properties and water content measurement in the wood

Authors:

Stanislav Bađun, Slavko Govorčin, Jasenka Babić

Keywords:

electric resistance; moisture level in wood; electric hygrometers

Volume 37 (1986), Issue 5-6

Emission of formaldehyde from unimproved and improved particle boards

Authors:

Mladen Komac, Marina Tatalović, Vladimir Bruči

Keywords:

free formaldehyde; emission classes; perforation method; diffusion method

Volume 37 (1986), Issue 11-12

Emission dynamics of formaldehyde from chipboard determined by perforation and diffusion method

Authors:

Vladimir Bruči, Vladimir Sertić, Ivo Opačić

Keywords:

emission dynamics of formaldehyde; perforation method; diffusion method

Volume 36 (1985), Issue 7-8

Compression and bending strength of beech and locust wood under different temperature and water contents conditions

Authors:

Hrvoje Turkulin

Keywords:

wood plasticity; toughness; moisture and temperature influence on plasticity properties

Volume 31 (1980), Issue 3-4

Contribution to investigation of humidity influence when testing particleboard properties

Authors:

Vilko Rajman

Keywords:

particleboards; influence of samples moisture content at the moment of testing; relation of moisture content and absolute value of the tested property

Volume 30 (1979), Issue 11-12

Contribution to investigation of influence of some factors on impact bending of some important commercial wood species

Authors:

Stanislav Bađun

Keywords:

impact bending; influence of specific gravity and the moisture content

Impact of Wood Moisture Content on Structural Integrity of Wood Under Dynamic Loads

Physical and Chemical Properties of Highland Bamboo (Yushania alpina) Culms Grown in Ethiopia

Prediction of Optimum Veneer Drying Parameters with Artifi cial Neural Networks for Production of Plywood with High Mechanical Properties

Effect of Acetylation and Accelerated Weathering of Nigerian Grown Rubberwood (Hevea brasiliensis, Müll. Arg.) on Equilibrium Moisture Content and Colour Change

Modelling and Investigating Real-World Drying Defects in Wood

Initial Desorption of Reaction Beech Wood

Influence of Moisture Content on Cutting Parameters and Fracture Characteristics of Spruce and Oak Wood

Effect of Soaking/Oven- Drying on Mechanical and Physical Properties of Birch (Betula spp.) Plywood

Characterisation and Modelling of Drying Kinetics of Thin Ash and Oak Wood Lamellas Dried with Infrared Radiation and Hot Air

The Effect of Mat Layers Moisture Content on Some Properties of Particleboard

The Effect of Thermo-Mechanical Treatment of Moso Bamboo (Phyllostachys Pubescens) on Its Sorption and Physicomechanical Properties

Influence of Air Humidity Variation on Strength of Rotary Welded Dowel Joints of Pinewood

Investigation of Friction Coefficients of Veneers as a Function of Fibre Direction and Moisture Content

The Impact of Nanoparticles and Moisture Content on Bonding Strength of Urea Formaldehyde Resin Adhesive

Assessment of Sorptive Properties of Selected Tropical Wood Species

Impact of Wood Species, Dimensions and Drying Temperature on Sorption Behaviour of Wood

Finite Changes of Bound Water Moisture Content in a Given Volume of Beech Wood

Change of Wood Moisture Content During Artificial Light Irradiation and its Influence on Colour Measurement

Properties of Modified Phenol-Formaldehyde Adhesive for Plywood Panels Manufactured from High Moisture Content Veneer

Specific Heat Capacity of Wood

Evaluation of Material Characteristics of Xylite – Part 1. Influence of Moisture Content on Some Mechanical Properties

Standardized Methods for Determining and Estimating Wood Moisture Content in the Republic of Croatia

Drying Kinetics of Poplar (Populus Deltoides) Wood Particles by a Convective Thin Layer Dryer

Research of Temperature and Moisture during Sitting on Office Chairs

Sorption Models and Creation of Precision Diagrams for the Equilibrium Moisture Content

Analysis of Selected Mechanical Properties of Construction Wood KVH and Parallam 2.0 E

Development of Innovative Particleboard Panels

Viscoelasticity characteristics of wood at the change of moisture content

Changes of moisture content during air-seasoning of beechwood

Numerical evaluation of beechwood discolouration during drying

Influence of veneer moisture content on shear strength of plywood adhesive bond

Mechanism of infection of fir wood joinery; Part 1: Exposure conditions, moisture content and permeability

Research into thermal conductivity and moisture permeability of different mattress structures

Research on final moisture content as a factor of wood drying quality

Establishment of specific drying energy of oak-wood flooring deal and thermodynamic model of drying

Development of moisture content distribution in sapwood and heartwood during initial stages of drying

Thermal conductivity and moisture permeability in mattress

Changes in moisture content during hardwood air-seasoning

Relation between emission formaldehyd value from MDF-boards determinated by perforation and diffusion method

Climate and natural wood drying

Heat and moisture content transfer in the mat during particleboard pressing

Some physical properties of fir-wood from Gorski kotar

Effect of moisture and temperature upon the compression strength parallel to grains of wood

Movement of moisture in decorative preservative protected wood

Electric properties and water content measurement in the wood

Emission of formaldehyde from unimproved and improved particle boards

Emission dynamics of formaldehyde from chipboard determined by perforation and diffusion method

Compression and bending strength of beech and locust wood under different temperature and water contents conditions

Contribution to investigation of humidity influence when testing particleboard properties

Contribution to investigation of influence of some factors on impact bending of some important commercial wood species

Publisher