Archive

Volume 75 (2024), Issue 2

Volume 75 (2024), Issue 3

Comparing Wettability and Surface Free Energy of False Heartwood, Ripe Wood and Sapwood in Beech (Fagus sylvatica L.)

Authors:

Barbora Slováčková, Oľga Mišíková, Jarmila Schmidtová

Keywords:

beech; false heartwood; light microscopy; surface free energy; wettability

Volume 75 (2024), Issue 3

Optimization of Energy Consumption During Industrial Veneer Drying – A Preliminary Assessment

Authors:

Qing Qiu, Julie Cool

Keywords:

data-driven approach; minimize energy cost; maximize quality turnout; veneer drying case study; process improvement

Volume 74 (2023), Issue 2

Impact of Wood Moisture Content on Structural Integrity of Wood Under Dynamic Loads

Authors:

Lukas Emmerich, Christian Brischke

Keywords:

brittleness; High-Energy Multiple Impact (HEMI) test; moisture content; moisture states; resistance to impact milling (RIM)

Volume 73 (2022), Issue 2

Characterization of Formaldehyde Emission and Combustion Properties of Peanut (Arachis Hypogaea) Husk-Based Green Composite Panels for Building Applications

Authors:

Ersin Ercan, Musa Atar, Mustafa Kucuktuvek, Hakan Keskin

Keywords:

particleboard, peanut husk, combustion properties, formaldehyde emission, green building materials

Volume 73 (2022), Issue 4

Fracture Behavior of Wood Under Mode I Loading in Tangential Direction

Authors:

Arif Caglar Konukcu

Keywords:

fracture; fracture toughness; southern yellow pine; red oak; specific fracture energy

Volume 72 (2021), Issue 3

Potencijal i uloga biomase u hrvatskoj i europskoj energetskoj tranziciji (Potential and Role of Biomass in Croatian and European Energy Transition)

Authors:

Helena Biljuš, Martina Basarac Sertić

Keywords:

biomass; energy transition; Croatia, European Union; European Green Deal

Volume 72 (2021), Issue 4

The Influence of Pulping Process and Energy Consumption on Properties of Nanofibrillated Lignocellulose (NFLC) Films Isolated from Wheat Straw

Authors:

Bita Moezzipour, Sahab Hedjazi, Hossein Yousefi, Mohammad Ahmadi

Keywords:

nanofibrillated lignocellulose; wheat straw; soda and MEA pulping; energy consumption

Volume 72 (2021), Issue 1

An Assessment of Environmental Impact on Glued Wood Building Elements

Authors:

Darius Albrektas, Ernestas Ivanauskas

Keywords:

glued wood (glulam); laminated veneer lumber; modulus of elasticity; coeffi cient of damping; wood defects

Volume 71 (2020), Issue 4

Improving Weathering Performance of Wood by Borates Impregnation and Liquid Glass Coating

Authors:

Mustafa Kucuktuvek, Hilmi Toker, Turkay Turkoglu, Gokhan Gunduz, Ergun Baysal

Keywords:

weathering; boron compounds; liquid glass; wood coating; surface characteristics; building material

Volume 71 (2020), Issue 4

Possibilities of Increasing Renewable Energy in Croatia, Slovenia and Slovakia – Wood Pellets

Authors:

Ivana Perić, Andreja Pirc Barčić, Petra Grošelj, Leon Oblak, Darko Motik, Vladislav Kaputa, Branko Glavonjić, Margarita Bego

Keywords:

wood industry; wood pellets; renewable energy source; Croatia; Slovenia; Slovakia; households

Volume 71 (2020), Issue 3

Contribution to the Evaluation of Thermal Insulation Properties of a Simple and a Double Window in a Log building

Authors:

Petr Fait, Pavel Král, Josef Čech, Vladimir Linhart

Keywords:

simple window; double window; thermal insulation properties; heat transfer

Volume 71 (2020), Issue 1

Impact of Irregular Tooth Pitch of Circular Saw Blades on Power for Wood Cross-Cutting

Authors:

Jozef Krilek, Miroslava Ťavodová, Ján Kováč, Branislav Tichý

Keywords:

energy consumption; cross-cutting wood; circular saw blades; cutting power; irregular tooth pitch

Volume 68 (2017), Issue 2

Operational vs. Embodied Energy: a Case for Wood Construction

Authors:

Laszlo Bejo

Keywords:

climate change; embodied energy; emissions; carbon-dioxide; carbon sequestration; wood based construction

Volume 68 (2017), Issue 1

Interrelationship between Static a nd Dynamic Strength Properties of Wood and its Structural Integrity

Authors:

Christian Brischke

Keywords:

bending strength; High-Energy Multiple Impact (HEMI) tests; impact bending strength; modulus of elasticity; Resistance to Impact Milling (RIM)

Volume 68 (2017), Issue 4

Surface Wettability of Wood Species from Tropical and Temperate Zones by Polar and Dispersive Liquids

Authors:

Agnieszka Laskowska, Paweł Kozakiewicz

Keywords:

contact angle; diiodomethane; surface free energy; water; wettability

Volume 67 (2016), Issue 4

Wood Waste Turned Into Value Added Products: Thermal Plasticization by Benzylation Process

Authors:

Birol Üner, Gökhan Köse, Yeşim Yürümez, Ömer Ümit Yalçın, Mehmet Akgül

Keywords:

thermoplastic resin; hydrogen bond energy; crystallinity; thermal properties

Volume 67 (2016), Issue 4

Modeling and Energy Consumption of Unilateral Heating Process of Flat Wood Details

Authors:

Nencho Deliiski, Neno Trichkov, Dimitar Angelski, Ladislav Dzurenda

Keywords:

unilateral heating; modeling; wood details; plasticizing; bendin; specific energy consumption

Volume 67 (2016), Issue 3

Calorific Value and Chemical Properties in Juvenile and Mature Wood of Thermally-Modified Eucalyptus Grandis

Authors:

Fred Willians Calonego, Elias Taylor Durgante Severo, Cláudio Angeli Sansígolo, Marcos Antonio de Rezende, Edson Marcelo Bruder, Vladimir Eliodoro Costa

Keywords:

biomass; energy; chemical properties; Eucalypts; thermally-modified wood

Volume 67 (2016), Issue 1

Influence of Thermal Modification on Surface Properties and Chemical Composition of Beech Wood (Fagus sylvatica L.)

Authors:

Josip Miklečić, Vlatka Jirouš-Rajković

Keywords:

thermal modification; contact angle; surface free energy; wood chemical composition

Volume 66 (2015), Issue 2

Study on Energy Requirement of Wood Chip Compaction

Authors:

Zoltán Kocsis, Etele Csanády

Keywords:

chip fraction; compaction; pellet diameter; temperature effect; compaction work; dimensionless numbers

Volume 65 (2014), Issue 4

The Impact of Design Parameters of a Horizontal Wood Splitter on Splitting Force

Authors:

Keywords:

horizontal splitter; energy consumption; splitting force; splitting wedge

Volume 65 (2014), Issue 4

Energy Consumption of Beech Timber Drying in Oscillation Climates

Authors:

Goran Milić, Branko Kolin, Nebojša Todorović, Željko Gorišek

Keywords:

wood drying; energy consumption; conventional drying; oscillation climates; beech timber

Volume 64 (2013), Issue 1

Sustainable Development and Green Buildings

Authors:

Arijit Sinha, Rakesh Gupta, Andreja Kutnar

Keywords:

LEED; life cycle analysis; wood

Volume 63 (2012), Issue 3

Drying Kinetics of Poplar (Populus Deltoides) Wood Particles by a Convective Thin Layer Dryer

Authors:

Hamid Zarea Hosseinabadi, Kazem Doosthosseini, Mohammad Layeghi

Keywords:

Poplar wood particles; thin layer dryer; drying kinetics model; effective moisture diffusivity; activation energy

Volume 63 (2012), Issue 3

Energy-Efficient Renovation Principles for Prefabricated Timber-Frame Residential Buildings

Authors:

Vesna Žegarac, Miroslav Premrov, Manja Kitek-Kuzman

Keywords:

timber building; glazing; energy efficiency; renovation

Volume 61 (2010), Issue 1

Energy Characteristics of Wood-Chips Produced from Salix Viminalis - Clone ULV

Authors:

Ladislav Dzurenda, Jarmila Geffertova, Vladimir Hecl

Keywords:

higher heating value; lower heating value; salix wood and bark; wood chips; energy plantations

Volume 58 (2007), Issue 1

Methods for improving building wood properties

Authors:

Vlatka Jirouš-Rajković, Hrvoje Turkulin, Vjekoslav Živković

Keywords:

wood modification; heat-treated wood; acetylation; nano-coatings; wood-plastic composites; WPC

Volume 57 (2006), Issue 4

Comparison of gross energy standards of framesaws and bandsaws

Authors:

Igor Đukić, Vlado Goglia

Keywords:

framesaw; bandsaw; gross energy standard

Volume 56 (2005), Issue 1

New methodology for assesment of socioeconomic aspects of bioenergy systems

Authors:

Julije Domac, Nike Krajnc

Keywords:

biomass; socio-economic impacts; employment

Volume 55 (2004), Issue 4

Modeling and automatic control of heat energy consumption required for thermal treatment of logs

Authors:

Nencho Deliiski

Keywords:

heat energy; mathematical model; automatic control; thermal conductivity; FORTRAN; logs

Volume 55 (2004), Issue 4

SWOT analysis - Information support for building development strategy of the Slovakian wood industry

Authors:

Andrea Sujova

Keywords:

wood industry; restructuralisation; SWOT analysis; SWOT matrix; strategic development

Volume 54 (2003), Issue 3

Determination of the ability of wooden surface for gluing

Authors:

Andrija Bogner, Ivica Grbac, Stjepan Risović

Keywords:

work of adhesion; wetting angle; critical surface energy; roughness factor; optimum surface tension of adhesives

Volume 54 (2003), Issue 3

Circular saw mechanics, Part II: Oak sawing - influence of saw blade position

Authors:

Vlado Goglia, Stjepan Risović, Ružica Beljo Lučić, Igor Đukić

Keywords:

circular saw; cutting forces; energy standards

Volume 53 (2002), Issue 2

Circular saw mechanics, Part I: Determination of the saw blade position

Authors:

Vlado Goglia, Stjepan Risović, Ružica Beljo Lučić, Igor Đukić

Keywords:

circular saw; cutting quality; energy standards

Volume 52 (2001), Issue 2

The prospects of wood as a shipbuilding material in Croatia

Authors:

Izvor Grubišić, Radovan Despot, Jelena Trajković, Mladen Balić

Keywords:

shipbuilding wood; wooden ships and boats; building, maintenance and protection of wooden ships

Volume 51 (2000), Issue 4

The dry rot fungus Serpula lacrymans - the major cause of wood decay in buildings

Authors:

Radovan Despot, Jelena Trajković, Bogoslav Šefc

Keywords:

Serpula lacrymans Wulfen: Fr.; Schroeter; dry rat fungi; wood preservatives; preservation methods

Volume 50 (1999), Issue 3

Residue in wood processing of Zagreb County

Authors:

Julije Domac, Stjepan Risović, Stanislav Sever

Keywords:

wood residue; forest biomass; co-generation; energy

Volume 47 (1996), Issue 3

Establishment of specific drying energy of oak-wood flooring deal and thermodynamic model of drying

Authors:

Miljenko Primorac, Stjepan Risović

Keywords:

drying energy of wood; specific energy of wood drying; irreversible heat engine; thermodynamic model of wood proceses; capillary diameters of wood structure; moisture of wood and structural openings; heat of evaporation

Volume 46 (1995), Issue 2

Application of Hamm’s approximate method of electric power determination for transport means research

Authors:

Ružica Beljo Lučić, Jaromir Malek

Keywords:

consumed electric energy; pneumatic and mechanical conveyor

Volume 46 (1995), Issue 4

Work of adhesion as criterion for determination of optimum surface tension in adhesives

Authors:

Andrija Bogner

Keywords:

wetting angle; work of adhesion; critical surface energy; roughness; optimum surface tension of adhesives

Volume 45 (1994), Issue 2

Energy and economic features of gantry crane at log storage

Authors:

Ružica Beljo Lučić

Keywords:

gantry crane; energy consumption; electrical power; costs

Volume 45 (1994), Issue 4

Wood residue as secondary energy agency

Authors:

Stjepan Risović

Keywords:

biomass; wood residue; wood waste

Volume 43 (1992), Issue 3

Gluing of fir with lignin-based adhesives using the conventional and the RF-method

Authors:

Andrija Bogner, Vlatka Jirouš-Rajković, Vladimir Sertić, Hrvoje Turkulin

Keywords:

gluing of fir; lignin based adhesives; intensification of adhesive; curing by conduction and RF energy

Volume 43 (1992), Issue 2

Research in the application of front milling to the processing of plain surfaces

Authors:

Vlado Goglia, Antun Šoštarić

Keywords:

front milling; plane surface machining; specific cutting energy; roughness

Volume 36 (1985), Issue 7-8

Timber buildings structures in the USSR

Authors:

Jindrich Frais

Keywords:

timber houses; glued beams; wallpanels in building construction

Volume 36 (1985), Issue 3-4

Building construction from glued timber in ČSSR

Authors:

Jindrich Frais

Keywords:

Volume 35 (1984), Issue 3-4

Activation energy of curing of furfuryl alcohol resin in the presence of wood

Authors:

Jovan Miljković

Keywords:

Volume 35 (1984), Issue 9-10

Energy production from wood residue, based on recent achievement of energetics

Authors:

Miroslav Markeš

Keywords:

wood residue; energy production; increased utilization; cogeneration

Volume 35 (1984), Issue 11-12

Consumption of energy at kiln drying of lumber and potential solutions for its saving

Authors:

Mirko Ilić

Keywords:

kiln drying-consumption of thermal and electrical energy; drying rough dimension stock; drying sawn boards; manufacture of elements

Volume 34 (1983), Issue 5-6

Non-stationary temperature changes in drying wood chambers during their cooling-off period

Authors:

Miljenko Primorac, Đuro Hamm

Keywords:

wood drying chambers; non stationary conducting of thermal energy; thermal stability; solar energy

Volume 32 (1981), Issue 7-8

Comparative testing of firmness and durability of glued joints in products of building trade

Authors:

Ivica Grbac, Zlatko Purgar, Boris Ljuljka, Andrija Bogner

Keywords:

firmness and durability of glued joints; surface finishing; breaking strength; accuracy of finishing; exposure to weather conditions

Volume 30 (1979), Issue 9-10

Some possibilities of industrial processing of bark and waste - Production of thermal energy

Authors:

Stjepan Petrović

Keywords:

bark and waste burning; caloric value of waste

A Benchmark for a New Nearly Zero Energy Wooden Building in Europe

Comparing Wettability and Surface Free Energy of False Heartwood, Ripe Wood and Sapwood in Beech (Fagus sylvatica L.)

Optimization of Energy Consumption During Industrial Veneer Drying – A Preliminary Assessment

Impact of Wood Moisture Content on Structural Integrity of Wood Under Dynamic Loads

Characterization of Formaldehyde Emission and Combustion Properties of Peanut (Arachis Hypogaea) Husk-Based Green Composite Panels for Building Applications

Fracture Behavior of Wood Under Mode I Loading in Tangential Direction

Potencijal i uloga biomase u hrvatskoj i europskoj energetskoj tranziciji (Potential and Role of Biomass in Croatian and European Energy Transition)

The Influence of Pulping Process and Energy Consumption on Properties of Nanofibrillated Lignocellulose (NFLC) Films Isolated from Wheat Straw

An Assessment of Environmental Impact on Glued Wood Building Elements

Improving Weathering Performance of Wood by Borates Impregnation and Liquid Glass Coating

Possibilities of Increasing Renewable Energy in Croatia, Slovenia and Slovakia – Wood Pellets

Contribution to the Evaluation of Thermal Insulation Properties of a Simple and a Double Window in a Log building

Impact of Irregular Tooth Pitch of Circular Saw Blades on Power for Wood Cross-Cutting

Operational vs. Embodied Energy: a Case for Wood Construction

Interrelationship between Static a nd Dynamic Strength Properties of Wood and its Structural Integrity

Surface Wettability of Wood Species from Tropical and Temperate Zones by Polar and Dispersive Liquids

Wood Waste Turned Into Value Added Products: Thermal Plasticization by Benzylation Process

Modeling and Energy Consumption of Unilateral Heating Process of Flat Wood Details

Calorific Value and Chemical Properties in Juvenile and Mature Wood of Thermally-Modified Eucalyptus Grandis

Influence of Thermal Modification on Surface Properties and Chemical Composition of Beech Wood (Fagus sylvatica L.)

Study on Energy Requirement of Wood Chip Compaction

The Impact of Design Parameters of a Horizontal Wood Splitter on Splitting Force

Energy Consumption of Beech Timber Drying in Oscillation Climates

Sustainable Development and Green Buildings

Drying Kinetics of Poplar (Populus Deltoides) Wood Particles by a Convective Thin Layer Dryer

Energy-Efficient Renovation Principles for Prefabricated Timber-Frame Residential Buildings

Energy Characteristics of Wood-Chips Produced from Salix Viminalis - Clone ULV

Methods for improving building wood properties

Comparison of gross energy standards of framesaws and bandsaws

New methodology for assesment of socioeconomic aspects of bioenergy systems

Modeling and automatic control of heat energy consumption required for thermal treatment of logs

SWOT analysis - Information support for building development strategy of the Slovakian wood industry

Determination of the ability of wooden surface for gluing

Circular saw mechanics, Part II: Oak sawing - influence of saw blade position

Circular saw mechanics, Part I: Determination of the saw blade position

The prospects of wood as a shipbuilding material in Croatia

The dry rot fungus Serpula lacrymans - the major cause of wood decay in buildings

Residue in wood processing of Zagreb County

Establishment of specific drying energy of oak-wood flooring deal and thermodynamic model of drying

Application of Hamm’s approximate method of electric power determination for transport means research

Work of adhesion as criterion for determination of optimum surface tension in adhesives

Energy and economic features of gantry crane at log storage

Wood residue as secondary energy agency

Gluing of fir with lignin-based adhesives using the conventional and the RF-method

Research in the application of front milling to the processing of plain surfaces

Timber buildings structures in the USSR

Building construction from glued timber in ČSSR

Activation energy of curing of furfuryl alcohol resin in the presence of wood

Energy production from wood residue, based on recent achievement of energetics

Consumption of energy at kiln drying of lumber and potential solutions for its saving

Non-stationary temperature changes in drying wood chambers during their cooling-off period

Comparative testing of firmness and durability of glued joints in products of building trade

Some possibilities of industrial processing of bark and waste - Production of thermal energy

Publisher