Archive

Mehmet Karamanoglu, Önder Tor

screw; pilot hole; seating torque; heat-treated wood

Volume 73 (2022), Issue 4

Fracture Behavior of Wood Under Mode I Loading in Tangential Direction

Arif Caglar Konukcu

fracture; fracture toughness; southern yellow pine; red oak; specific fracture energy

Volume 73 (2022), Issue 3

Wood Fibre Characteristics of Pedunculate Oak (Quercus R obur L.) Growing in Different Ecological Conditions

Dušan Jokanović, Tatjana Ćirković-Mitrović, Vesna Nikolić Jokanović, Radoslav Lozjanin, Iva Ištok

pedunculate oak (Quercus robur L.); fibre characteristics; Gornji Srem; Donji Srem; wood variation

Volume 73 (2022), Issue 3

Influence of Moisture Content on Cutting Parameters and Fracture Characteristics of Spruce and Oak Wood

Luďka Hanincová, Jiří Procházka, Vít Novák, Zdeněk Kopecký

cutting force; feed force; fracture toughness; shear yield strength; moisture content

Volume 72 (2021), Issue 2

Effect of Soaking/Oven- Drying on Mechanical and Physical Properties of Birch (Betula spp.) Plywood

Regino Kask, Harri Lille, Mihkel Kiviste

plywood; bending strength; modulus of elasticity; thickness swelling; restore dimensions; moisture content; X-Ray technique

Volume 72 (2021), Issue 1

Climate Signals in Earlywood, Latewood and Tree-Ring Width Chronologies of Sessile Oak (Quercus petraea (Matt.) Liebl.) from Majdanpek, North–Eastern Serbia

Nenad Radaković, Branko Stajić

dendroecology; earlywood; latewood and tree-ring; pointer years; sessile oak; Serbia

Volume 71 (2020), Issue 2

Characterisation and Modelling of Drying Kinetics of Thin Ash and Oak Wood Lamellas Dried with Infrared Radiation and Hot Air

Aleš Straže, Miljenko Klarić, Zlatko Budrović, Stjepan Pervan

wood drying kinetics; hot air drying; infrared drying; moisture diffusion

Volume 70 (2019), Issue 3

Influence of Natural Surface Ageing on Bonding Quality of Thermally Modified Oak and Beech Wood

Vjekoslav Živković, Gustav Gabrek, Goran Mihulja

bonding; delamination; modified wood; shear strength; surface ageing

Volume 70 (2019), Issue 1

Influence of Finishing Materials on Viscous Elastic Properties of Wooden Structures

Darius Albrektas, Elvyra Revuckaitė, Vaida Dobilaitė, Milda Jucienė

oak wood; pine wood; modulus of elasticity; damping coefficient; finishing materials; pentaftal varnish; wood oil

Volume 69 (2018), Issue 2

Dendroclimatological Analysis of Radial Growth of Old-Growth Oak (Quercus Robur L.) on the Oder River Floodbank in the City of Wrocław, South-Western Poland

Robert Kalbarczyk, Monika Ziemiańska, Aleksandra Machowska-Molik

dendrochronology; pedunculate oak; pointer years; temperature; precipitation; urban area

Volume 65 (2014), Issue 2

Tree-Ring Chronology of Pedunculate Oak (Quercus robur) and its Potential for Development of Dendrochronological Research in Croatia

Katarina Čufar, Bogoslav Šefc, Martin De Luis, András Morgós, Michael Grabner, Maks Merela, Jelena Trajković

dendrochronology; pedunculate oak (Quercus robur); dendroclimatology; teleconnection; heteroconnection

Volume 64 (2013), Issue 4

Mechanical properties of sapwood versus heartwood, in three different oak species

Maks Merela, Katarina Čufar

oak; Quercus; sapwood; heartwood; properties; density; bending strength; modulus of elasticity; Brinell hardness

Volume 64 (2013), Issue 2

Influence of Temperature on Cambial Activity and Cell Differentiation in Quercus Sessiliflora and Acer Pseudoplatanus of Different Ages

Jožica Gričar

sessile oak; sycamore maple; heating; cooling; cambium; cell differentiation; xylem; phloem; dead bark; light microscopy

Volume 61 (2010), Issue 2

Effect of Thermal Modification of Oak Wood on Sawdust Granularity

Ladislav Dzurenda, Kazimierz A. Orlowski, Marek Grzeskiewicz

oak wood sawdust; thermal modification; frame sawing machine; granulometric analysis; granularity

Volume 54 (2003), Issue 3

Circular saw mechanics, Part II: Oak sawing - influence of saw blade position

Vlado Goglia, Stjepan Risović, Ružica Beljo Lučić, Igor Đukić

circular saw; cutting forces; energy standards

Volume 52 (2001), Issue 1

Application of standards in unedged oak board classification

Tomislav Prka, Josip Ištvanić, Samir Mekić

oak unedged boards; classification of boards; quality of boards; defects oj wood; standards HRN, DIN, EN

Volume 51 (2000), Issue 3

Contribution to the research of the bark properties of several wood species

Stanislav Bađun

bark; density; hardness; beech; hornbeam; oak; ash; poplar; fir

Volume 51 (2000), Issue 1

The influence of the structure of three-layer particle boards on the thickness and density of surface layer

Sergej Medved, Vladimir Jambreković

particleboard; spruce; beech; oak; poplar; surface layer; core layer; particle geometry; vertical density distribution; layer thickness; layer density

Volume 50 (1999), Issue 1

Dusty influence research in final woodworking companies

Ankica Kos Pervan, Dubravko Horvat, Krešimir Šega

wood dust; health risk; beech; oak

Volume 49 (1998), Issue 4

Distribution of properties in use for oak, beech and fir-wood in a radial direction

Slavko Govorčin, Tomislav Sinković, Jelena Trajković

beech (Fagus silvatica L.); oak (Quercus robur L.); fir (Abies alba Mill.); density of oven dry wood; radial and tangential shrinkage; bending strength; compression strength parallel to the grain

Volume 49 (1998), Issue 2

Industrial evaluation of drying stresses in oakwood dimension parts

Stjepan Pervan, Ivica Grbac

Oakwood dimension parts; casehardening; industrial evaluation

Volume 49 (1998), Issue 1

Research on final moisture content as a factor of wood drying quality

Stjepan Pervan, Ivica Grbac, Ljiljana Luketić

oakwood dimension parts; drying quality; moisture content

Volume 47 (1996), Issue 1

The production of barrels in Croatia

Milivoj Golub

cooperage; barrel; oak-wood

Volume 47 (1996), Issue 4

Lyctus powderpost beetles - the most frequent woodboring insects in oakwood and ashwood parquet

Radovan Despot

Lyctus powderpost beetle (Lyctidae spp.); oakwood; ashwood; parquet; block or strip flooring; preservation methods

Volume 47 (1996), Issue 3

Establishment of specific drying energy of oak-wood flooring deal and thermodynamic model of drying

Miljenko Primorac, Stjepan Risović

drying energy of wood; specific energy of wood drying; irreversible heat engine; thermodynamic model of wood proceses; capillary diameters of wood structure; moisture of wood and structural openings; heat of evaporation

Volume 47 (1996), Issue 2

Processing of Bog-oak (Ouercus robur, Erch) into Fine Veneer

Franjo Penzar, Hrvoje Matušić

fossil oak (bog wood); the production of precious venner; the physical and mechanical properties of veneer

Volume 46 (1995), Issue 1

Drying of 32 mm oak-wood boards - comparison of the experimental and production kiln-dryng schedules

Stjepan Pervan

oakwood; conventional kiln; kiln-drying schedule

Volume 46 (1995), Issue 1

Some physical and mechanical properties of the Bednja abonos

Slavko Govorčin, Tomislav Sinković

oak abonos (oakwood buried in the ground); wood colour; physical und mechanical properties of abonos

Volume 44 (1993), Issue 3

Drying of oakwood infected by anaerobic bacteria

Stjepan Pervan

oak wood; anaerobic bacteria; drying process

Volume 40 (1989), Issue 7-8

Producing veneer of oak (quercus robur erch) by pyramidal cutting

Franjo Penzar

oak wood; pyramidal cut; cutting with standard equipment; peeling-machine.

Volume 39 (1988), Issue 11-12

Development of oak wood sawmilling (Part 2)

Volume 39 (1988), Issue 9-10

Development of oak wood sawmilling

conventional sawmilling of oak; dimension stock technology of oak; conversion of thin oak logs

Volume 38 (1987), Issue 7-8

Production of dimension stock in Yugoslav sawmills

purposive conversion of oak and beech; single-phase conversion; two-phase conversion

Volume 38 (1987), Issue 9-10

Development of timber conversion and utilization of Slavonian oak and other hardwood species in Croatia from 1699 to 1984

Marko Gregić

forest exploitation; sawmilling and chemical processing of wood; woodworking; development of timber industry in Croatia

Volume 37 (1986), Issue 1-2

Saturation points of the bark fiber of beech, hornbeam, oak, ash, poplar and fir

Stanislav Bađun

bark; hygroscopic features

Volume 37 (1986), Issue 1-2

Extraction dynamics of extractive substances from wood by using a mixture of benzene and methanol

Milan Kaić

extraction; extractive substances; fir; juniper; oak; poplar; locust

Volume 32 (1981), Issue 11-12

Some structural characteristics of adult homegrown oakwood (quercus robur, l.)

Božidar Petrić, Velimir Šćukanec

characteristics of oakwood structural elements; volume participation of structural elements

Volume 31 (1980), Issue 3-4

Some structural characteristics of juvenile and mature oakwood (Quercus robur L.)

Božidar Petrić, Velimir Šćukanec

juvenile wood; variations of structural elements; limit of juvenile oakwood

Volume 31 (1980), Issue 11-12

Contribution to the investigation of properties of juvenile oak wood (Quercus robur L.)

Stanislav Bađun

juvenile oakwood; density and shrinkage; thin oak logs

Volume 30 (1979), Issue 7-8

Contribution to investigation of voluminal and qualitative utilization of oak veneer logs dependent on thickness grade and provenience

Ilija Stjepčević

voluminal and qualitative utilization of veneer logs; production of cut veneer; thickness grade and provenience of logs

Volume 29 (1978), Issue 7-8

Sawing of oak logs parallel to bark and parallel to pith

Nevenko Petruša

recovery of oak logs; parallel to pith sawing; taper sawing

Volume 27 (1976), Issue 7-8

The problems of the oak dimension stock production

oak dimension stock; manufacturing; oak dimension stock yield

Volume 26 (1975), Issue 5-6

Purposive processing of small oak logs