Archive

Volume 75 (2024), Issue 1

Thermal Modification Intensity of Heat-treated Poplar Wood. Part 2: Characterization and Predication from Outside to Core Layers

Authors:

Yang Li, Yong Zhu, Shengquan Liu, Zuju Shu, Redžo Hasanagić, Fathi Leila, Demiao Chu

Keywords:

heat treatment; modification intensity; transition; hardness; color; surface layer; inner layers; poplar wood

Volume 75 (2024), Issue 1

Comparative Study on Dimensional Stability and Biological Durability of Poplar Wood Modified by Chemical and Heat Treatment

Authors:

Ajmal Samani, Sauradipta Ganguly, Sanjeet Kumar Hom, Varun Sharma

Keywords:

biological durability; chemical modification; dimensional stability; heat treatment

Volume 75 (2024), Issue 1

Influence of Feed Speed and Cutting Depth During Planing on Surface Roughness of Fir, Poplar and Beech Wood

Authors:

Hasan Talić, Atif Hodžić

Keywords:

surface roughness; planing; feed speed; depth of cut; quality

Volume 74 (2023), Issue 4

Thermal Modification Intensity of Heat-treated Poplar Wood Part 1: Characterization and Predication of Surface Layer

Authors:

Yang Li, Tao Yao, Yong Zhu, Zuju Shu, Shengquan Liu, Redžo Hasanagić, Fathi Leila, Demiao Chu

Keywords:

heat treatment; modification intensity; hardness; color; poplar wood

Volume 74 (2023), Issue 4

Bio-Durability and Engineering Characteristics of Heat-Treated Poplar Wood

Authors:

Seyedeh Masoomeh Zamani, Reza Hajihassani, Saman Ghahri

Keywords:

poplar; thermo-wood; fungus; physical and mechanical properties; biological resistance

Volume 74 (2023), Issue 1

Plywood Cantilever Deflection: Experimental, Analytical and FEM Approach

Authors:

Alma Žiga, Josip Kačmarčik

Keywords:

beam deflection; design of experiment; half-circle cantilever; orthotropic composite material; poplar plywood; straight cantilever

Volume 73 (2022), Issue 2

Composition of Essential Oils in Needles and Barks of Turkish Red Pine (Pinus brutia Ten.) Infested by Marchalina hellenica Genn.

Authors:

Mustafa Burak Arslan, Selçuk Küçükaydin, Meltem Taş-Küçükaydin, Mehmet Emin Duru, Halil Turgut Şahin

Keywords:

Marchalina hellenica, Pinus brutia, essential oils, GC-MS, needles, bark

Volume 73 (2022), Issue 2

Physical and Mechanical Properties and Decay Resistance of Poplar Modified with mDMDHEU

Authors:

Huseyin Sivrikaya, Ahmet Can

Keywords:

wood modification, mDMDHEU, dimensional stability, MOR, FTIR, TGA, decay resistance

Volume 73 (2022), Issue 2

Comparison of Soda, Kraft, and DES Pulp Properties of European Black Poplar

Authors:

Sezgin Koray Gülsoy, Ülkü Burcu Gitti, Ayhan Gençer

Keywords:

DES, European black poplar, green chemistry, cleaner production, pulp properties

Volume 72 (2021), Issue 3

Effect of Using Urea Formaldehyde Modified with Extracts in Plywood on Formaldehyde Emission

Authors:

Ugur Bilgin, Gursel Colakoglu

Keywords:

formaldehyde emission; plywood; elm bark; hazelnut husk; tannin; urea formaldehyde

Volume 72 (2021), Issue 1

Bending Characteristics of Laminated Wood Composites Made of Poplar Wood and GFRP

Authors:

Mehmet Nuri Yildrim, Abdurrahman Karaman, Mustafa Zor

Keywords:

poplar; wood laminate; bending strength; modulus of elasticity

Volume 72 (2021), Issue 2

Chemical and Structural Characterization of Poplar and Black Pine Wood Exposed to Short Thermal Modification

Authors:

Vasiliki Kamperidou

Keywords:

cellulose; chemical composition; FTIR; lignin; thermal treatment; wood

Volume 71 (2020), Issue 4

Influence of Fibre Length on Properties of Glass-Fibre Reinforced Bark Particleboards

Authors:

Zoltan Pásztory, Zoltan Börcsök, Dimitrios Tsalagkas

Keywords:

utilization of bark; bio-based insulation panel; poplar bark

Volume 71 (2020), Issue 3

Characterization of Engineering Elastic Parameters of Oriented Strand Board (OSB) Manufactured from Poplar (Populus deltoides) Strands Using Ultrasonic Contact Pulse Transmission

Authors:

Meysam Zahedi, Saeed Kazemi Najafi, Josef Füssl, Majid Elyasi

Keywords:

poplar (Populus deltoides); oriented strand bord; engineering parameters; ultrasonic waves

Volume 71 (2020), Issue 4

An in Vitro Study on Antifungal Properties, Total Polyphenolic Content and Antioxidant Activity of Different Parts of Selected Fruit Trees

Authors:

Derya Ustaömer, Elif Topaloğlu, Bilge Yilmaz, Hüseyin Serencam, İlhan Deniz

Keywords:

antioxidant; antifungal; bark; date plum; loquat; olive; wood

Volume 70 (2019), Issue 4

The Effect of Using Alum Mordant in Wild Cherry Bark Dyestuff for the Production of UV Resistant Colored Paper

Authors:

Ayhan Gençer, Ahmet Can, Aysun Mustak, Ülkü Burcu Gitti

Keywords:

wild cherry bark; chemical-thermomechanical pulp (CTMP); alum; weathering

Volume 70 (2019), Issue 2

Effect of Pine (Pinus Sylvestris) Bark Dust on Particleboard Thickness Swelling and Internal Bond

Authors:

Sergej Medved, Eugenia Mariana Tudor, Marius Catalin Barbu, Vladimir Jambreković, Nikola Španić

Keywords:

bark dust; particleboard; thickness swelling; water absorption; internal bond

Volume 69 (2018), Issue 4

Comparison of VOC Emissions from Natural Wood and Heat Treated Wood

Authors:

Petr Čech

Keywords:

VOC emissions; spruce; poplar; heat-treated wood; gas chromatography

Volume 69 (2018), Issue 4

Weathering Resistance of Poplar Wood Coated by Organosilane Water Soluble Nanomaterials

Authors:

Hadi Gholamiyan, Asghar Tarmian

Keywords:

clear coatings; organosilane nanomaterials; weathering; wood

Volume 68 (2017), Issue 4

The Effect of Heat Modification and Densification on Physical Properties of Poplar Wood

Authors:

Gonca Düzkale Sözbir, İbrahim Bektaş

Keywords:

poplar wood; densification; heat modification; physical properties

Volume 68 (2017), Issue 3

Influence of Lyophilisation and Oven-Drying on Extraction Yield of Oregonin from European Black Alder (Alnus glutinosa (L.) Gaertn.) Bark

Authors:

Miljenko Klarić, Stjepan Pervan, Martina Biošić

Keywords:

European black alder; bark; oregonin; hydrothermal treatment; lyophilisation (freeze-drying); ovendrying; extraction yield; methanol; deionised water

Volume 68 (2017), Issue 3

Fiber Characteristics of White Poplar (Populus alba L.) Juvenile Wood along the Drava River

Authors:

Iva Ištok, Bogoslav Šefc, Marin Hasan, Gordana Popović, Tomislav Sedlar

Keywords:

Populus alba L.; juvenile wood; fiber characteristics; wood anatomical properties variation

Volume 67 (2016), Issue 1

The Effects of Poly(vinyl acetate) Filled with Nanoclay and Cellulose Nanofibrils on Adhesion Strength of Poplar and Scots Pine Wood

Authors:

Deniz Aydemir, Gokhan Gunduz, Nejla Aşık, Alice Wang

Keywords:

Poly(vinyl acetate); cellulose nanofibrils (CNFs); nano clay (NC); nanoparticles filled composites; adhesion

Volume 67 (2016), Issue 2

Physical Properties of Wood in Poplar Clones ’I-214’ and ’S1-8’

Authors:

Iva Ištok, Tomislav Sedlar, Bogoslav Šefc, Tomislav Sinković, Tomica Perković

Keywords:

Poplar clones; ʻI-214ʼ; ʻS1-8ʼ; wood density variation; wood shrinkage variation

Volume 64 (2013), Issue 3

Dimensional Stability of Plywood Panels Made from Thermally Modified Poplar Veneers in the Conditions of Variable Air Humidity

Authors:

Vladislav Zdravković, Aleksandar Lovrić, Bojana Stanković

Keywords:

thermal modification; poplar veneer; plywood panels; dimensional stability; ASE

Volume 64 (2013), Issue 2

Influence of Temperature on Cambial Activity and Cell Differentiation in Quercus Sessiliflora and Acer Pseudoplatanus of Different Ages

Authors:

Jožica Gričar

Keywords:

sessile oak; sycamore maple; heating; cooling; cambium; cell differentiation; xylem; phloem; dead bark; light microscopy

Volume 64 (2013), Issue 2

Thermally Compressed Poplar Wood (TCW): Physical and Mechanical Properties

Authors:

Zeki Candan, Süleyman Korkut, Öner Ünsal

Keywords:

Thermally compressed wood (TCW); hardness; vertical density profile; density; poplar wood (Populus spp)

Volume 63 (2012), Issue 3

Drying Kinetics of Poplar (Populus Deltoides) Wood Particles by a Convective Thin Layer Dryer

Authors:

Hamid Zarea Hosseinabadi, Kazem Doosthosseini, Mohammad Layeghi

Keywords:

Poplar wood particles; thin layer dryer; drying kinetics model; effective moisture diffusivity; activation energy

Volume 61 (2010), Issue 3

MDF/HDF Production from Plantation Wood Species

Authors:

Tibor Alpár, Tibor Fáczán, István Rácz, Gabor Kátoli

Keywords:

MDF; HDF; wood plantation; Pannonia poplar; I214 poplar; black locust; Austrian pine; fiberboard production; physical aspects of MDF/HDF boards

Volume 61 (2010), Issue 1

Energy Characteristics of Wood-Chips Produced from Salix Viminalis - Clone ULV

Authors:

Ladislav Dzurenda, Jarmila Geffertova, Vladimir Hecl

Keywords:

higher heating value; lower heating value; salix wood and bark; wood chips; energy plantations

Volume 60 (2009), Issue 3

Production of cement-bonded particleboards from poplar (Populus euramericana cv. „I 214“)

Authors:

Tibor Alpár, István Rácz

Keywords:

cement-bonded particleboards; calcium-chloride; calcium-formate; poplar; scots pine; water glass

Volume 59 (2008), Issue 3

Effect of technological parameters and wood properties on cutting power in plane milling of juvenile poplar wood

Authors:

Štefan Barcík, Eva Pivolusková, Richard Kminiak

Keywords:

milling; poplar; cutting power; juvenile wood; fast-growing trees

Volume 55 (2004), Issue 1

Emission of NO2 from the combustion process of wet wood and bark

Authors:

Ladislav Dzurenda

Keywords:

phytomass; nitrogen; combustion; exhaust gases; concentration of NO2

Volume 51 (2000), Issue 3

Contribution to the research of the bark properties of several wood species

Authors:

Stanislav Bađun

Keywords:

bark; density; hardness; beech; hornbeam; oak; ash; poplar; fir

Volume 51 (2000), Issue 1

The influence of the structure of three-layer particle boards on the thickness and density of surface layer

Authors:

Sergej Medved, Vladimir Jambreković

Keywords:

particleboard; spruce; beech; oak; poplar; surface layer; core layer; particle geometry; vertical density distribution; layer thickness; layer density

Volume 51 (2000), Issue 1

A Yield of American Walnut in Sliced Veneer Production

Authors:

Vladimir Bruči, Aida Kopljar, Vladimir Jambreković

Keywords:

sliced veneer; veneer flitches; hydrothermic treatment; a share of bark; veneer thickness; veneer drying; yield of American walnut

Volume 49 (1998), Issue 3

A supplement to the knowledge on chemical properties of beech bark

Authors:

Neven Bujas

Keywords:

beech; chemical properties of beech bark; HPLC; metals

Volume 46 (1995), Issue 3

Biotechnical wood protection in timber storage yards of woodworking plants

Authors:

Gorazd Babuder

Keywords:

biotechnical wood protection; scolytid bark beetles; trups; synthetic pheromones; timber storage yards.

Volume 37 (1986), Issue 1-2

Saturation points of the bark fiber of beech, hornbeam, oak, ash, poplar and fir

Authors:

Stanislav Bađun

Keywords:

bark; hygroscopic features

Volume 37 (1986), Issue 1-2

Extraction dynamics of extractive substances from wood by using a mixture of benzene and methanol

Authors:

Milan Kaić

Keywords:

extraction; extractive substances; fir; juniper; oak; poplar; locust

Volume 36 (1985), Issue 11-12

Contribution to research into bark properties of some species of wood

Authors:

Stanislav Bađun

Keywords:

bark; density; hardness

Volume 30 (1979), Issue 3

Some possibilities of bark and wood wastes conversion briquetting

Authors:

Stjepan Petrović

Keywords:

wood wastes; bark and wastes briquetting; wooden briquettes thermal value

Volume 30 (1979), Issue 9-10

Some possibilities of industrial processing of bark and waste - Production of thermal energy

Authors:

Stjepan Petrović

Keywords:

bark and waste burning; caloric value of waste

Volume 29 (1978), Issue 5-6

Kora - otpadak ili gorivo?

Authors:

Zvonimir Preveden

Keywords:

bark; calorific value; combustion diagrams; environmental protection

Volume 29 (1978), Issue 7-8

Sawing of oak logs parallel to bark and parallel to pith

Authors:

Nevenko Petruša

Keywords:

recovery of oak logs; parallel to pith sawing; taper sawing

Thermal Modification Intensity of Heat-treated Poplar Wood. Part 2: Characterization and Predication from Outside to Core Layers

Comparative Study on Dimensional Stability and Biological Durability of Poplar Wood Modified by Chemical and Heat Treatment

Influence of Feed Speed and Cutting Depth During Planing on Surface Roughness of Fir, Poplar and Beech Wood

Thermal Modification Intensity of Heat-treated Poplar Wood Part 1: Characterization and Predication of Surface Layer

Bio-Durability and Engineering Characteristics of Heat-Treated Poplar Wood

Plywood Cantilever Deflection: Experimental, Analytical and FEM Approach

Composition of Essential Oils in Needles and Barks of Turkish Red Pine (Pinus brutia Ten.) Infested by Marchalina hellenica Genn.

Physical and Mechanical Properties and Decay Resistance of Poplar Modified with mDMDHEU

Comparison of Soda, Kraft, and DES Pulp Properties of European Black Poplar

Effect of Using Urea Formaldehyde Modified with Extracts in Plywood on Formaldehyde Emission

Bending Characteristics of Laminated Wood Composites Made of Poplar Wood and GFRP

Chemical and Structural Characterization of Poplar and Black Pine Wood Exposed to Short Thermal Modification

Influence of Fibre Length on Properties of Glass-Fibre Reinforced Bark Particleboards

Characterization of Engineering Elastic Parameters of Oriented Strand Board (OSB) Manufactured from Poplar (Populus deltoides) Strands Using Ultrasonic Contact Pulse Transmission

An in Vitro Study on Antifungal Properties, Total Polyphenolic Content and Antioxidant Activity of Different Parts of Selected Fruit Trees

The Effect of Using Alum Mordant in Wild Cherry Bark Dyestuff for the Production of UV Resistant Colored Paper

Effect of Pine (Pinus Sylvestris) Bark Dust on Particleboard Thickness Swelling and Internal Bond

Comparison of VOC Emissions from Natural Wood and Heat Treated Wood

Weathering Resistance of Poplar Wood Coated by Organosilane Water Soluble Nanomaterials

The Effect of Heat Modification and Densification on Physical Properties of Poplar Wood

Influence of Lyophilisation and Oven-Drying on Extraction Yield of Oregonin from European Black Alder (Alnus glutinosa (L.) Gaertn.) Bark

Fiber Characteristics of White Poplar (Populus alba L.) Juvenile Wood along the Drava River

The Effects of Poly(vinyl acetate) Filled with Nanoclay and Cellulose Nanofibrils on Adhesion Strength of Poplar and Scots Pine Wood

Physical Properties of Wood in Poplar Clones ’I-214’ and ’S1-8’

Dimensional Stability of Plywood Panels Made from Thermally Modified Poplar Veneers in the Conditions of Variable Air Humidity

Influence of Temperature on Cambial Activity and Cell Differentiation in Quercus Sessiliflora and Acer Pseudoplatanus of Different Ages

Thermally Compressed Poplar Wood (TCW): Physical and Mechanical Properties

Drying Kinetics of Poplar (Populus Deltoides) Wood Particles by a Convective Thin Layer Dryer

MDF/HDF Production from Plantation Wood Species

Energy Characteristics of Wood-Chips Produced from Salix Viminalis - Clone ULV

Production of cement-bonded particleboards from poplar (Populus euramericana cv. „I 214“)

Effect of technological parameters and wood properties on cutting power in plane milling of juvenile poplar wood

Emission of NO2 from the combustion process of wet wood and bark

Contribution to the research of the bark properties of several wood species

The influence of the structure of three-layer particle boards on the thickness and density of surface layer

A Yield of American Walnut in Sliced Veneer Production

A supplement to the knowledge on chemical properties of beech bark

Biotechnical wood protection in timber storage yards of woodworking plants

Saturation points of the bark fiber of beech, hornbeam, oak, ash, poplar and fir

Extraction dynamics of extractive substances from wood by using a mixture of benzene and methanol

Contribution to research into bark properties of some species of wood

Some possibilities of bark and wood wastes conversion briquetting

Some possibilities of industrial processing of bark and waste - Production of thermal energy

Kora - otpadak ili gorivo?

Sawing of oak logs parallel to bark and parallel to pith

Publisher