Archive

Volume 75 (2024), Issue 1

Thermal Modification Intensity of Heat-treated Poplar Wood. Part 2: Characterization and Predication from Outside to Core Layers

Authors:

Yang Li, Yong Zhu, Shengquan Liu, Zuju Shu, Redžo Hasanagić, Fathi Leila, Demiao Chu

Keywords:

heat treatment; modification intensity; transition; hardness; color; surface layer; inner layers; poplar wood

Volume 75 (2024), Issue 2

The Effect of Type of Reinforcement, Type of Glue and Reinforcement Place on Mechanical and Physical Properties of LVL

Authors:

İlkay Atar, Fatih Mengeloğlu

Keywords:

reinforced LVL; glass fiber; basalt; epoxy; phenol formaldehyde

Volume 75 (2024), Issue 2

Experimental Investigation of Rotational Behavior of Glulam Column-Beam Connection Reinforced with Carbon, Glass, Basalt and Aramid FRP Fabric

Authors:

Yasemin Şi̇mşek Türker

Keywords:

glulam, column-beam, connection, FRP fabric, reinforced

Volume 75 (2024), Issue 3

Optimization of Energy Consumption During Industrial Veneer Drying – A Preliminary Assessment

Authors:

Qing Qiu, Julie Cool

Keywords:

data-driven approach; minimize energy cost; maximize quality turnout; veneer drying case study; process improvement

Volume 74 (2023), Issue 1

Synthesis of Phenolic Resin Reinforced with TiO2 Nanoparticles and its Effect on Combustion Performance of Laminated Veneer Lumber (LVL)

Authors:

Günay Özbay, Musa Atar, Ayhan Ozcifci

Keywords:

adhesive; combustion; FT-IR; nano-chemicals; TiO2 nanoparticles

Volume 74 (2023), Issue 1

Shear Force Capacities of H-Type Furniture Joints Constructed of Various Heat-Treated Wood Species

Authors:

Mehmet Acar, Engin Balikci, Tolga Kuskun, Ali Kasal, Ziya Yusuf Erdil

Keywords:

heat-treated wood; H-type joint; mortise and tenon joint; dowel joint; shear force capacity

Volume 74 (2023), Issue 1

The Influence of Different Wood Modifications on Pull-out Force of Rotary Welded Dowels

Authors:

Ivica Župčić, Igor Đukić, Matija Jug, Mario Jurišić, Marin Hasan

Keywords:

rotary welding; thermal modification; modification with citric acid; pull-out force; wooden dowels

Volume 74 (2023), Issue 4

Effect of Epoxy Resin Reinforcement on Screw Withdrawal Strength of Fiberboard and Particleboard Used in Furniture Industry

Authors:

Mesut Uysal, Cagatay Tasdemir, Memis Dogan

Keywords:

epoxy resin; reinforcement; screw withdrawal strength; medium density fiberboard; particleboard

Volume 73 (2022), Issue 3

Feed Cutting Force Component in Up and Down Sawing of Pine

Authors:

Ľubomír Javorek, Richard Kminiak, Mária Vargovská, Etele Csanády, Szabolcs Németh

Keywords:

pine wood; sawing; feed speed; rake angle; teeth number; feed force

Volume 73 (2022), Issue 3

Influence of Moisture Content on Cutting Parameters and Fracture Characteristics of Spruce and Oak Wood

Authors:

Luďka Hanincová, Jiří Procházka, Vít Novák, Zdeněk Kopecký

Keywords:

cutting force; feed force; fracture toughness; shear yield strength; moisture content

Volume 73 (2022), Issue 4

Fracture Behavior of Wood Under Mode I Loading in Tangential Direction

Authors:

Arif Caglar Konukcu

Keywords:

fracture; fracture toughness; southern yellow pine; red oak; specific fracture energy

Volume 73 (2022), Issue 4

Impact of Circular Saw Blade Design on Forces During Cross-Cutting of Wood

Authors:

Zdeněk Kopecký, Vít Novák, Luďka Hlásková, Jakub Rak

Keywords:

saw blade; mitre saw; Kistler dynamometer; cross-cutting; force analysis; Ernst-Merchant model; statistical analysis

Volume 73 (2022), Issue 1

Reinforcement of Joints Between LVL Members with GFRP and Finite Element Analysis

Authors:

Mosayeb Dalvand, Ghanbar Ebrahimi, Kambiz Pourtahmasi

Keywords:

veneer lumber; glass fiber reinforced polymer; finite element method; failure modes

Volume 72 (2021), Issue 2

Dependence of Dowel Joint Strength on Welding Temperature in Rotary Welding

Authors:

Ivica Župčić, Ivan Žulj, Ivica Grbac, Kristijan Radmanović

Keywords:

welding of wood; embedded force; temperature in rotary welding; dowel joints

Volume 72 (2021), Issue 2

Fiberglass Plaster Mesh as Reinforcement for Cement Bonded Particleboard

Authors:

Hasan Hüseyin Taş

Keywords:

cement bonded particleboard; fiberglass plaster mesh; physical and mechanical properties

Volume 72 (2021), Issue 3

Heat-Treated Wood Reinforced High Density Polyethylene Composites

Authors:

Kadir Karakuş, Deniz Aydemir, Gokhan Gunduz, Fatih Mengeloğlu

Keywords:

HDPE; wood flour; thermal modification; heat treatment; polymer composite

Volume 72 (2021), Issue 3

Possibility of Use of NCC Reinforced Melamine-Urea-Formaldehyde Adhesive in Plywood Manufacturing

Authors:

Jakub Kawalerczyk, Dorota Dziurka, Radosław Mirski, Joanna Siuda, Marta Babicka

Keywords:

plywood; melamine-urea-formaldehyde adhesive; nanocellulose; filler

Volume 72 (2021), Issue 4

Finite Element Analysis of Dynamic Characteristics and Bending Stiffness for Cross Laminated Timber Floor Panels with and without Openings

Authors:

Ljiljana Kozarić, Smilja Bursać, Martina Vojnić Purčar, Miroslav Bešević, Žikica Tekić

Keywords:

cross laminated timber floors; bending stiffness; floors with openings; finite element analysis

Volume 72 (2021), Issue 4

The Influence of Heating Degree Days on Fuelwood Consumption in Households in Selected Countries of Central and Southeastern Europe

Authors:

Slavica Petrović

Keywords:

heating degree days; heating season; fuelwood; households; space heating

Volume 71 (2020), Issue 4

Finite Element Modeling of Fiber Reinforced Polymer-Based Wood Composites Used in Furniture Construction Considering Semi-Rigid Connections

Authors:

Mustafa Zor, Murat Emre Kartal

Keywords:

fiber reinforced polymer (FRP); furniture; glue; diagonal tension loading; finite element method (FEM)

Volume 71 (2020), Issue 4

Influence of Fibre Length on Properties of Glass-Fibre Reinforced Bark Particleboards

Authors:

Zoltan Pásztory, Zoltan Börcsök, Dimitrios Tsalagkas

Keywords:

utilization of bark; bio-based insulation panel; poplar bark

Volume 71 (2020), Issue 3

Durability and Mechanical Performance of Differently Treated Glulam Beams during Two Years of Outdoor Exposure

Authors:

Davor Kržišnik, Samo Grbec, Boštjan Lesar, Denis Plavčak, Aleš Straže, Milan Šernek, Bogdan Šega, Miha Humar

Keywords:

degradation; glulam; mechanical testing; performance; service life; wood

Volume 71 (2020), Issue 3

Competitiveness of Selected South-Eastern European Countries in European Union Wood Flooring Market

Authors:

Branko Glavonjić, Aleksandra Lazarević, Leon Oblak, Miljan Kalem, Predrag Sretenović

Keywords:

competitiveness; flooring; market; models; wood

Volume 71 (2020), Issue 3

Wood Sector Media Budget Allocation: Comparison of Republic of North Macedonia and some South-Eastern European Countries

Authors:

Ilijana Petrovska, Živka Meloska, Mira Stankević Šumanska, Angelina Meloska

Keywords:

advertising; furniture; media budget allocation; promotion; wood industry

Volume 70 (2019), Issue 3

Wood Industry Trade Competitiveness of Selected Countries of Southeast Europe

Authors:

Slobodan Cvetanović, Miroljub Nikolić

Keywords:

trade competitiveness; trade competitiveness indicators; wood industry; Southeast Europe

Volume 70 (2019), Issue 3

Accelerated Weathering and Decay Resistance of Heat-Treated Wood Reinforced Polypropylene Composites

Authors:

Deniz Aydemir, Mizgin Alsan, Ahmet Can

Keywords:

wood polymer composites; heat-treated wood; polypropylene (PP); outdoor performance; thermoplastics

Volume 70 (2019), Issue 3

Influence of Air Humidity Variation on Strength of Rotary Welded Dowel Joints of Pinewood

Authors:

Ivan Žulj, Ivica Župčić, Ivica Grbac

Keywords:

welding solid wood; Scots pine (Pinus sylvestris L.); dowels; strength of welded joints; weld factors; embedded force; the impact of humidity on wood; wood moisture content

Volume 69 (2018), Issue 2

Dendroclimatological Analysis of Radial Growth of Old-Growth Oak (Quercus Robur L.) on the Oder River Floodbank in the City of Wrocław, South-Western Poland

Authors:

Robert Kalbarczyk, Monika Ziemiańska, Aleksandra Machowska-Molik

Keywords:

dendrochronology; pedunculate oak; pointer years; temperature; precipitation; urban area

Volume 68 (2017), Issue 2

Wood-Cement Board Reinforced with Steel Nets and Woven Hemp Yarns: Physical and Mechanical Properties

Authors:

Hossein Rangavar

Keywords:

wood-cement board; cement content; steel nets; hemp yarns; physical and mechanical properties

Volume 68 (2017), Issue 2

Impact of Veneer Layouts on Plywood Tensile Strength

Authors:

Violeta Jakimovska Popovska, Borche Iliev, Goran Zlateski

Keywords:

plywood; veneers; tensile strength; changes; position; layers

Volume 67 (2016), Issue 1

Effect of Climatic Conditions on Tree-Ring Widths in Black Locust (Robinia pseudoacacia L.) in the city of Wrocław

Authors:

Robert Kalbarczyk, Monika Ziemiańska, Aleksandra Machowska-Molik

Keywords:

dendroclimatology; local chronology; regression analysis; south-western Poland; urban area

Volume 67 (2016), Issue 1

Measurement of Wood Cutting Forces during Bandsawing Using Piezoelectric Dynamometer

Authors:

Payam Moradpour, Frieder Scholz, Kazem Doosthosseini, Asghar Tarmian

Keywords:

bandsawing; cutting forces; cutting speed; feed rate; piezoelectric dynamometer

Volume 66 (2015), Issue 1

Morphological and Thermal Properties of Cellulose Nanofibrils Reinforced Epoxy Nanocomposites

Authors:

Deniz Aydemir

Keywords:

epoksidni nanokompoziti; celulozni nanofibrili; morfološka i toplinska analiza

Volume 66 (2015), Issue 1

Mineralized Wood Particle Reinforced Concrete as Stiffening Elements with Reduced Density

Authors:

Fabian Wulf, Karsten Schulz, Lukas Brösel, Alexander Pfriem

Keywords:

wood concrete compound; mineralization; compressive strength

Volume 66 (2015), Issue 4

Effects of Nanosilver-Impregnation and Heat Treatment on Coating Pulloff Adhesion Strength on Solid Wood

Authors:

Hamid Reza Taghiyari, Amir Samadarpour

Keywords:

coating; nanotechnology; heat treatment; permeability; porous structure; solid wood

Volume 66 (2015), Issue 2

Evaluation of Weathering of Furfurylated Wood Decks after a 3-year Outdoor Exposure in Greece

Authors:

George Mantanis, Charalampos Lykidis

Keywords:

furfurylated wood; wood decks; weathering test; Kebony wood

Volume 65 (2014), Issue 4

The Impact of Design Parameters of a Horizontal Wood Splitter on Splitting Force

Authors:

Keywords:

horizontal splitter; energy consumption; splitting force; splitting wedge

Volume 65 (2014), Issue 2

Influence of Various Wood Species and Cross-Sections on Strength of a Dowel Welding Joint

Authors:

Ivica Župčić, Zoran Vlaović, Danijela Domljan, Ivica Grbac

Keywords:

welding of wood; dowel joints; withdrawal strength; embedded force; wood species; anatomical orientation

Volume 63 (2012), Issue 3

Wood Sector Media Promotion in Some South-East European Countries

Authors:

Denis Jelačić, Leon Oblak, Slavica Petrović, Maja Moro, Andreja Pirc Barčić, Vanja Ćošić, Živka Meloska

Keywords:

wood sector; media; media coverage; insertations; promotion investments

Volume 63 (2012), Issue 2

Convective Drying of Beech Lumber without Color Changes of Wood

Authors:

Ladislav Dzurenda, Nencho Deliiski

Keywords:

beech lumber; convective drying; regime of drying; color of wood

Volume 62 (2011), Issue 2

Welding Time as an Important Factor of Beech Welding

Authors:

Ivica Župčić, Andrija Bogner, Ivica Grbac

Keywords:

welding of beech; welding time; strength of the welded joint; dowels; embedded force

Volume 60 (2009), Issue 4

Estimating the extent of influence of two intrinsic fuelwood properties on acceptance/retention of some woody species in agroforestry practices in southwest Nigeria

Authors:

Andrew Erakhrumen

Keywords:

agroforestry; biomass; biofuel; fuelwood; net calorific value; species selectivity; specific gravity; prioritization; sub-Sahara Africa

Volume 60 (2009), Issue 2

Performance of thermally modified timber (TMT) in outdoor application – durability, abrasion and optical appearance

Authors:

Christian Welzbacher, Christian Brischke, Andreas Rapp, Silvia Koch, Sabine Hofer

Keywords:

blue stain; cracks; decking; façade; weathering

Volume 60 (2009), Issue 2

Changes in value-added wood product manufacturer perceptions about certification in the United States from 2002 to 2008

Authors:

Richard Vlosky, Rado Gazo, Daniel Cassens, Priyan Perera

Keywords:

certification; United States; wood products; value-added; manufacturers

Volume 59 (2008), Issue 2

Properties of blue-stained wood

Authors:

Miha Humar, Viljem Vek, Bojan Bučar

Keywords:

Aureobasidium pullulans; colour; FTIR; modulus of elasticity; Pinus sylvestris; sap-stain; Sclerophoma pithyophila

Volume 56 (2005), Issue 4

Cut layer of a circular saw with radial run-out of cutting edges

Authors:

Roman Wasielewski, Tomasz Walkowiak

Keywords:

wood cutting; circular saw; radial run-out

Volume 56 (2005), Issue 4

Determination of cutting forces in cutting wood materials

Authors:

Zdeněk Kopecký, Miroslav Rousek

Keywords:

measuring stand; wood agglomerated materials; cutting; circular saw blade

Volume 55 (2004), Issue 4

Cellular manufacturing system and its application in a furniture factory

Authors:

Ercan Tanritanir

Keywords:

Cellular Manufacturing System; Group Technology; Cellular Layout; Furniture Industry

Volume 54 (2003), Issue 3

Circular saw mechanics, Part II: Oak sawing - influence of saw blade position

Authors:

Vlado Goglia, Stjepan Risović, Ružica Beljo Lučić, Igor Đukić

Keywords:

circular saw; cutting forces; energy standards

Volume 51 (2000), Issue 4

Stress in circular saw blade by finite element method

Authors:

Stjepan Risović

Keywords:

circular saw; saw blade stress; method of finite elements; centrifugal force

Volume 46 (1995), Issue 1

The influence of band saw strain force on idling power

Authors:

Ružica Beljo Lučić, Vlado Goglia

Keywords:

band saw; strain force; cutting speed; idling power

Volume 39 (1988), Issue 5-6

Reduction of extreme stresses on band-saw blades through regulation of the cross-alignment angle of the pulleys

Authors:

Mario Štambuk

Keywords:

band-saw; band-saw blade; cross-aligning of band-saw pulleys; reduction of extreme stresses in band-saw blades

Volume 38 (1987), Issue 7-8

Influence of terrain factors on merchantable timber skidding effects with frame steered skidder

Authors:

Stevan Bojanin

Keywords:

merchantable timber; wood skidding; frame steered skidder; tree-length system; assortment system; inclination of the slope; terrain condition; skidding speed; travelling empty; travelling loaded; skidding distance; fixed time; variable time; effective time; trip; standard time; daily output

Volume 36 (1985), Issue 1-2

International timber market in 1984 and the outlook in 1985

Authors:

Dušan Oreščanin

Keywords:

offer and demand of wood products; outlook in the international trade; sawngoods; wood-based panels; woodpulp and paper

Volume 36 (1985), Issue 1-2

Standardization of the "capacity" concept

Authors:

Marijan Brezinšćak

Keywords:

mass carrying capacity; capacity as a force; capacity as moment of force; volume carrying capacity

Volume 35 (1984), Issue 7-8

Cross-aligning of band-saw pulleys

Authors:

Mario Štambuk

Keywords:

band-saws; cross-aligning of band-saw pulleys; stresses in the saw band blades; wear and tear of the pulley rim

Volume 34 (1983), Issue 5-6

Higher profit out of small investments in the mills manufacturing woodbased panels

Authors:

Salah-Eldien Omer

Keywords:

measuring instruments; small investments; product quality; higher profit

Volume 34 (1983), Issue 9-10

Methodical constructing - new approach to construction and design of new products

Authors:

Stjepan Tkalec

Keywords:

methodical constructing; intuitive and discursive methods of designing; constructional working out; coefficient of coordination

Volume 33 (1982), Issue 9-10

Solid wood cutting-out optimization

Authors:

Željko Pizent

Keywords:

cutting-out optimization; solid wood cutting-out capacity

Volume 31 (1980), Issue 9-10

One of possible methods of rationalization of operations in the woodworking industry process

Authors:

Zdravko Fučkar

Keywords:

relation between the input and the output; establishment of condition; rationalization of moulding operations; calculation of effects

Volume 30 (1979), Issue 5-6

Practical application of the system theory in evaluation of job complexity in wood industry

Authors:

Mladen Figurić

Keywords:

job evaluation in wood industry; »input-output« method; complexity of input; complexity of system structure; complexity of output; synergical effect

Volume 28 (1977), Issue 7-8

Contribution to projecting system improvement and to working out in detail of principles and criteria for personal income distribution in woodworking industry

Authors:

Mladen Figurić

Keywords:

distribution system; general model; principles and criteria for job evaluation

Volume 27 (1976), Issue 1-2

Stability testing in chairs without armsupports

Authors:

Slavko Govorčin

Keywords:

Volume 27 (1976), Issue 7-8

About some coefficients determining the relation between two properties - application in woodworking industry

Authors:

Vladimir Hitrec

Keywords:

prognosis; regression analysis; log volume yield; flow of material

Volume 26 (1975), Issue 7-8

Discussion about predetermined time system in the timber industry

Authors:

Mladen Figurić

Keywords:

Thermal Modification Intensity of Heat-treated Poplar Wood. Part 2: Characterization and Predication from Outside to Core Layers

The Effect of Type of Reinforcement, Type of Glue and Reinforcement Place on Mechanical and Physical Properties of LVL

Experimental Investigation of Rotational Behavior of Glulam Column-Beam Connection Reinforced with Carbon, Glass, Basalt and Aramid FRP Fabric

Optimization of Energy Consumption During Industrial Veneer Drying – A Preliminary Assessment

Synthesis of Phenolic Resin Reinforced with TiO2 Nanoparticles and its Effect on Combustion Performance of Laminated Veneer Lumber (LVL)

Shear Force Capacities of H-Type Furniture Joints Constructed of Various Heat-Treated Wood Species

The Influence of Different Wood Modifications on Pull-out Force of Rotary Welded Dowels

Effect of Epoxy Resin Reinforcement on Screw Withdrawal Strength of Fiberboard and Particleboard Used in Furniture Industry

Feed Cutting Force Component in Up and Down Sawing of Pine

Influence of Moisture Content on Cutting Parameters and Fracture Characteristics of Spruce and Oak Wood

Fracture Behavior of Wood Under Mode I Loading in Tangential Direction

Impact of Circular Saw Blade Design on Forces During Cross-Cutting of Wood

Reinforcement of Joints Between LVL Members with GFRP and Finite Element Analysis

Dependence of Dowel Joint Strength on Welding Temperature in Rotary Welding

Fiberglass Plaster Mesh as Reinforcement for Cement Bonded Particleboard

Heat-Treated Wood Reinforced High Density Polyethylene Composites

Possibility of Use of NCC Reinforced Melamine-Urea-Formaldehyde Adhesive in Plywood Manufacturing

Finite Element Analysis of Dynamic Characteristics and Bending Stiffness for Cross Laminated Timber Floor Panels with and without Openings

The Influence of Heating Degree Days on Fuelwood Consumption in Households in Selected Countries of Central and Southeastern Europe

Finite Element Modeling of Fiber Reinforced Polymer-Based Wood Composites Used in Furniture Construction Considering Semi-Rigid Connections

Influence of Fibre Length on Properties of Glass-Fibre Reinforced Bark Particleboards

Durability and Mechanical Performance of Differently Treated Glulam Beams during Two Years of Outdoor Exposure

Competitiveness of Selected South-Eastern European Countries in European Union Wood Flooring Market

Wood Sector Media Budget Allocation: Comparison of Republic of North Macedonia and some South-Eastern European Countries

Wood Industry Trade Competitiveness of Selected Countries of Southeast Europe

Accelerated Weathering and Decay Resistance of Heat-Treated Wood Reinforced Polypropylene Composites

Influence of Air Humidity Variation on Strength of Rotary Welded Dowel Joints of Pinewood

Dendroclimatological Analysis of Radial Growth of Old-Growth Oak (Quercus Robur L.) on the Oder River Floodbank in the City of Wrocław, South-Western Poland

Wood-Cement Board Reinforced with Steel Nets and Woven Hemp Yarns: Physical and Mechanical Properties

Impact of Veneer Layouts on Plywood Tensile Strength

Effect of Climatic Conditions on Tree-Ring Widths in Black Locust (Robinia pseudoacacia L.) in the city of Wrocław

Measurement of Wood Cutting Forces during Bandsawing Using Piezoelectric Dynamometer

Morphological and Thermal Properties of Cellulose Nanofibrils Reinforced Epoxy Nanocomposites

Mineralized Wood Particle Reinforced Concrete as Stiffening Elements with Reduced Density

Effects of Nanosilver-Impregnation and Heat Treatment on Coating Pulloff Adhesion Strength on Solid Wood

Evaluation of Weathering of Furfurylated Wood Decks after a 3-year Outdoor Exposure in Greece

The Impact of Design Parameters of a Horizontal Wood Splitter on Splitting Force

Influence of Various Wood Species and Cross-Sections on Strength of a Dowel Welding Joint

Wood Sector Media Promotion in Some South-East European Countries

Convective Drying of Beech Lumber without Color Changes of Wood

Welding Time as an Important Factor of Beech Welding

Estimating the extent of influence of two intrinsic fuelwood properties on acceptance/retention of some woody species in agroforestry practices in southwest Nigeria

Performance of thermally modified timber (TMT) in outdoor application – durability, abrasion and optical appearance

Changes in value-added wood product manufacturer perceptions about certification in the United States from 2002 to 2008

Properties of blue-stained wood

Cut layer of a circular saw with radial run-out of cutting edges

Determination of cutting forces in cutting wood materials

Cellular manufacturing system and its application in a furniture factory

Circular saw mechanics, Part II: Oak sawing - influence of saw blade position

Stress in circular saw blade by finite element method

The influence of band saw strain force on idling power

Reduction of extreme stresses on band-saw blades through regulation of the cross-alignment angle of the pulleys

Influence of terrain factors on merchantable timber skidding effects with frame steered skidder

International timber market in 1984 and the outlook in 1985

Standardization of the "capacity" concept

Cross-aligning of band-saw pulleys

Higher profit out of small investments in the mills manufacturing woodbased panels

Methodical constructing - new approach to construction and design of new products

Solid wood cutting-out optimization

One of possible methods of rationalization of operations in the woodworking industry process

Practical application of the system theory in evaluation of job complexity in wood industry

Contribution to projecting system improvement and to working out in detail of principles and criteria for personal income distribution in woodworking industry

Stability testing in chairs without armsupports

About some coefficients determining the relation between two properties - application in woodworking industry

Discussion about predetermined time system in the timber industry

Publisher