Archive

Volume 74 (2023), Issue 1

Utilization of Scots Pine (Pinus sylvestris L.) Timber with Defects in Production of Engineered Wood Products

Authors:

Daniel Koynov, Miglena Valyova, Emiliyan Parzhov, Lee Seng Hua

Keywords:

Pinus sylvestris L.; engineered wood; knots; cross-laminated timber (CLT); solid wood panels

Volume 71 (2020), Issue 4

Influence of Fibre Length on Properties of Glass-Fibre Reinforced Bark Particleboards

Authors:

Zoltan Pásztory, Zoltan Börcsök, Dimitrios Tsalagkas

Keywords:

utilization of bark; bio-based insulation panel; poplar bark

Volume 67 (2016), Issue 2

Utilization of Common Hazelnut (Corylus avellana L.) Prunings for Pulp Production

Authors:

Ayhan Gençer, Ayhan Özgül

Keywords:

common hazelnut wood; Kraft pulp production; paper; wood pruning

Volume 64 (2013), Issue 3

Quantitative HPLC Analysis of Catechin in Wound- Associated Wood and Knots of Beech

Authors:

Viljem Vek, Primož Oven, Ida Poljanšek

Keywords:

catechin; liquid chromatography; wound-wood; knots; Fagus sylvatica

Volume 63 (2012), Issue 4

Choice of Quantitative Method for Forecasting of Parquet Sales

Authors:

Leon Oblak, Lidija Zadnik Stirn, Maja Moro, Jasna Hrovatin, Samo Mole, Manja Kitek-Kuzman

Keywords:

wood company; parquet; sales forecasting; quantitative methods; Holt-Winters multiplicative model

Volume 62 (2011), Issue 1

Influence of Initial Wood Quality and Drying Process on Utilization Grades of Sawn Spruce Timber

Authors:

Aleš Straže, Željko Gorišek

Keywords:

wood; drying; drying quality; grading

Volume 60 (2009), Issue 3

Simulation in Wood Industry. Part I

Authors:

Mihály Varga, Etele Csanády, Zoltán Kocsis, Zalán Koppány Kovács

Keywords:

simulation; flow-simulation; utilization; throughput

Volume 60 (2009), Issue 2

Utilization of contribution margin in the costing system in production of components for wood working machines

Authors:

Marek Potkány, Miloš Hitka

Keywords:

calculation; costing; cost; profit; contribution margin

Volume 47 (1996), Issue 1

Utilization of the transportation devices in kiln dryers

Authors:

Ankica Kos Pervan, Stjepan Pervan

Keywords:

Kiln dryers; transport devices; woodworking production

Volume 40 (1989), Issue 11-12

Present situation in primary conversion and finalization and problems of further development of timber conversion in »Bilokalnik« Koprivnica

Authors:

Nevenko Petruša

Keywords:

utilization of sawn timber; secondary conversion; sale of workpieces manufactured in the mill

Volume 39 (1988), Issue 3-4

Forestry and timber industry in Yugoslavia in 1987

Authors:

Dušan Oreščanin

Keywords:

exports and imports of timber; products of forest utilization; primary processing of wood; veneers and wood-based panels; finished wood products

Volume 39 (1988), Issue 5-6

Chemical and anatomical properties and possibility of firwood sawmill residue utilization for high-yield chemimechanical pulps production

Authors:

Tatjana Stevanović Janežić, Biljana Bujanović

Keywords:

firwood sawmill residue; Abies pectinata; chemical composition; anatomical properties; softwood chips; high-yield pulps; chemimechanical pulping; chemithermomechanical pulping; softwood sulfonation; quuinomethide; sulphonated lignin; better qualities CMP/CTMP

Volume 38 (1987), Issue 9-10

Development of timber conversion and utilization of Slavonian oak and other hardwood species in Croatia from 1699 to 1984

Authors:

Marko Gregić

Keywords:

forest exploitation; sawmilling and chemical processing of wood; woodworking; development of timber industry in Croatia

Volume 37 (1986), Issue 1-2

Rationalization of forest biomass utilization in Czechoslovakia

Authors:

Jindrich Frais

Keywords:

Volume 37 (1986), Issue 9-10

Integral utilization of raw material

Authors:

Vladimir Sertić

Keywords:

chemical conversion of wood; pulp and paper; thermal conversion; hydrolysis of carbohydrates; lignin; extractives

Volume 35 (1984), Issue 9-10

Energy production from wood residue, based on recent achievement of energetics

Authors:

Miroslav Markeš

Keywords:

wood residue; energy production; increased utilization; cogeneration

Volume 34 (1983), Issue 4

Beechwood and its utilization in production of railway sleepers

Authors:

Nada Uidl

Keywords:

beech railway sleepers; staining

Volume 34 (1983), Issue 7-8

Optimal utilization of volume of wood in kombinat "Belišće"

Authors:

Vjekoslav Međurečan

Keywords:

quantitative degree of utilization; value utilization degree; quantitative; value utilization degree; labour productivity; optimal degree of utilization

Volume 34 (1983), Issue 7-8

Research of quantitative and qualitative utilization of thin beech round logs

Authors:

Ramiz Zubčević

Keywords:

thin beech logs; quantitative utilization; quantitative structure of assortments

Volume 34 (1983), Issue 7-8

Effect of axial form and distribution of qualitative zones of unstandard beech round logs on technology and utilization

Authors:

Borislav Šoškić

Keywords:

quantitative utilization of unstandard beech logs; technology of thin round logs conversion

Volume 34 (1983), Issue 4

Conversion of decidious species by combination of mechanical and chemical processing, particulary from aspect of solving the problem of wood waste

Authors:

Mile Orešković

Keywords:

chemical wood processing and sawmilling; wood waste; wood briquettes from sawdust and baric; integral utilization of wood

Volume 33 (1982), Issue 3-4

Qualitative comparison of different arrangement of saw blades in regard to utilization of logs on the frame-saws

Authors:

Vladimir Hitrec

Keywords:

simulation of sawing on the frame saw; volume utilization of logs; influential factors of utilization

Volume 32 (1981), Issue 1-2

Determination of arrangement of saw blades by a method of simulated sawing of logs on the frame saws

Authors:

Vladimir Hitrec

Keywords:

optimization of sawing; simulation of sawing; volume utilization; value utilization

Volume 31 (1980), Issue 5-6

Influence of sawing technology on utilization of firwood logs

Authors:

Đorđe Butković

Keywords:

firwood utilization; experimental sawing; simulating sawing

Volume 30 (1979), Issue 4

Maximum yield from the side zones of the sawlog

Authors:

Mojsije Vučeljić

Keywords:

log conversion with the gang saw; utilization of the log side zones; setting of sawblades in the gang saw

Volume 30 (1979), Issue 7-8

Contribution to investigation of voluminal and qualitative utilization of oak veneer logs dependent on thickness grade and provenience

Authors:

Ilija Stjepčević

Keywords:

voluminal and qualitative utilization of veneer logs; production of cut veneer; thickness grade and provenience of logs

Volume 30 (1979), Issue 7-8

Investigations of quantitative and qualitative utilization in sawing firwood sprucewood logs

Authors:

Ramiz Zubčević

Keywords:

sawn conifiers; quantitative and qualitative utilization

Volume 29 (1978), Issue 5-6

Utilization of low quality beech logs sawn on band saw by two different methods

Authors:

Marko Gregić

Keywords:

conversion of Iow quality beech Iogs; »radial« and »tangential« sawing on band saws; quantity, quality and value yield

Volume 28 (1977), Issue 9-10

Rationalization of veneer consumption in furniture manufacture

Authors:

Rudolf Truc

Keywords:

veneer utilization in furniture manufacture; veneer preparation; veneer splicing

Volume 27 (1976), Issue 11-12

Some aspects of power consumption influence on business activity of woodworking enterprises

Authors:

Franjo Halusek

Keywords:

planning and rational power utilization; tariff rate choice

Volume 26 (1975), Issue 11-12

Utilization of sawmill capacities in S.R. Croatia

Authors:

Ivica Milinović

Keywords:

Utilization of Lignin Monomer Isolation from Black Liquor of Empty Palm Oil Bunches as a Prebiotic

Utilization of Scots Pine (Pinus sylvestris L.) Timber with Defects in Production of Engineered Wood Products

Influence of Fibre Length on Properties of Glass-Fibre Reinforced Bark Particleboards

Utilization of Common Hazelnut (Corylus avellana L.) Prunings for Pulp Production

Quantitative HPLC Analysis of Catechin in Wound- Associated Wood and Knots of Beech

Choice of Quantitative Method for Forecasting of Parquet Sales

Influence of Initial Wood Quality and Drying Process on Utilization Grades of Sawn Spruce Timber

Simulation in Wood Industry. Part I

Utilization of contribution margin in the costing system in production of components for wood working machines

Utilization of the transportation devices in kiln dryers

Present situation in primary conversion and finalization and problems of further development of timber conversion in »Bilokalnik« Koprivnica

Forestry and timber industry in Yugoslavia in 1987

Chemical and anatomical properties and possibility of firwood sawmill residue utilization for high-yield chemimechanical pulps production

Development of timber conversion and utilization of Slavonian oak and other hardwood species in Croatia from 1699 to 1984

Rationalization of forest biomass utilization in Czechoslovakia

Integral utilization of raw material

Energy production from wood residue, based on recent achievement of energetics

Beechwood and its utilization in production of railway sleepers

Optimal utilization of volume of wood in kombinat "Belišće"

Research of quantitative and qualitative utilization of thin beech round logs

Effect of axial form and distribution of qualitative zones of unstandard beech round logs on technology and utilization

Conversion of decidious species by combination of mechanical and chemical processing, particulary from aspect of solving the problem of wood waste

Qualitative comparison of different arrangement of saw blades in regard to utilization of logs on the frame-saws

Determination of arrangement of saw blades by a method of simulated sawing of logs on the frame saws

Influence of sawing technology on utilization of firwood logs

Maximum yield from the side zones of the sawlog

Contribution to investigation of voluminal and qualitative utilization of oak veneer logs dependent on thickness grade and provenience

Investigations of quantitative and qualitative utilization in sawing firwood sprucewood logs

Utilization of low quality beech logs sawn on band saw by two different methods

Rationalization of veneer consumption in furniture manufacture

Some aspects of power consumption influence on business activity of woodworking enterprises

Utilization of sawmill capacities in S.R. Croatia

Publisher