Archive

Volume 73 (2022), Issue 1

Effect of Acetylation and Accelerated Weathering of Nigerian Grown Rubberwood (Hevea brasiliensis, Müll. Arg.) on Equilibrium Moisture Content and Colour Change

Authors:

Samuel Oluyinka Olaniran

Keywords:

rubberwood; equilibrium moisture content; moisture ratio; acetylation; accelerated weathering

Volume 73 (2022), Issue 3

Colour Change of Steamed Alder Wood Caused by UV Radiation

Authors:

Ladislav Dzurenda, Michal Dudiak

Keywords:

alder wood; colour difference; steaming; saturated water steam; UV radiation

Volume 73 (2022), Issue 1

Long-Term Hygroscopic Thickness Swelling Rate of Hydrothermally Treated Beech Wood / Polypropylene Composites

Authors:

Seyyed Khalil Hosseinihashemi, Farhad Arwinfar, Abdollah Najafi, Ferhat Özdemir, Nadir Ayrilmis, Abbas Tamjidi

Keywords:

thickness swelling rate; thermal-treatment; lignocellolusic filler; polypropylene

Volume 71 (2020), Issue 4

Improving Weathering Performance of Wood by Borates Impregnation and Liquid Glass Coating

Authors:

Mustafa Kucuktuvek, Hilmi Toker, Turkay Turkoglu, Gokhan Gunduz, Ergun Baysal

Keywords:

weathering; boron compounds; liquid glass; wood coating; surface characteristics; building material

Volume 70 (2019), Issue 2

Chemical and Application Properties of Some Solvent and Water Based Coatings on Wooden Substrate

Authors:

Shikhar Shukla, Krishna K. Pandey, Kishan Kumar

Keywords:

organic coatings; water borne coatings; NC lacquer; polyurethane; Melia dubia; film thickness; FTIR; gloss

Volume 70 (2019), Issue 2

Analysis of Implementation of Integrated Information Systems in Croatian Wood Processing Industry

Authors:

Ivana Perić, Petra Grošelj, Andrea Sujova, Miljan Kalem, Krešimir Greger, Jože Koprivšek

Keywords:

Integrated Information Sytems (IIS); ERP; Croatian wood processing industry; business performance

Volume 70 (2019), Issue 4

Effect of Accelerated Weathering Test on Selected Properties of Bamboo, Scots Pine and Oriental Beech Wood Treated with Waterborne Preservatives

Authors:

Elif Topaloğlu

Keywords:

accelerated weathering; bamboo; mechanical properties; waterborne preservative; wood

Volume 70 (2019), Issue 3

Accelerated Weathering and Decay Resistance of Heat-Treated Wood Reinforced Polypropylene Composites

Authors:

Deniz Aydemir, Mizgin Alsan, Ahmet Can

Keywords:

wood polymer composites; heat-treated wood; polypropylene (PP); outdoor performance; thermoplastics

Volume 68 (2017), Issue 4

Surface Wettability of Wood Species from Tropical and Temperate Zones by Polar and Dispersive Liquids

Authors:

Agnieszka Laskowska, Paweł Kozakiewicz

Keywords:

contact angle; diiodomethane; surface free energy; water; wettability

Volume 68 (2017), Issue 3

Design for AAL Integrated Furniture for the Care and Support of Elderly and Disabled People

Authors:

Piotr Beer, Sylwia Olenska, Izabela Podobas, Marcin Zbieć

Keywords:

furniture; AAL; ergonomic; design; elderly; disabled people

Volume 68 (2017), Issue 3

The Effects of Lignocellulosic Fillers on Mechanical, Morphological and Thermal Properties of Wood Polymer Composites

Authors:

Eser Sozen, Deniz Aydemir, Mustafa Zor

Keywords:

wood polymer composites; natural fillers; filler rate; mechanical properties; morphological characterization; thermal stability

Volume 67 (2016), Issue 4

Bending Creep Behavior of Hornbeam Wood

Authors:

Valiullah Moosavi, Habibollah Khademi Eslam, Behzad Bazyar, Abdollah Najafi, Mohammad Talaeipoor

Keywords:

altitude; Carpinus betulus; creep factor; creep modulus; relative creep; relative humidity

Volume 67 (2016), Issue 3

Influencing Factors on Looseness of Chipped Material Generated during Wood Planing

Authors:

Matija Jug, Ružica Beljo Lučić, Anka Ozana Čavlović

Keywords:

chipped wood; looseness factor; bulk density; feed speed; planing

Volume 67 (2016), Issue 1

Measurement of Wood Cutting Forces during Bandsawing Using Piezoelectric Dynamometer

Authors:

Payam Moradpour, Frieder Scholz, Kazem Doosthosseini, Asghar Tarmian

Keywords:

bandsawing; cutting forces; cutting speed; feed rate; piezoelectric dynamometer

Volume 66 (2015), Issue 1

Tests of Wooden Specimens from Scots Pine (Pinus sylvestris) with the Help of Anisotropic Plasticity Material Model

Authors:

Jan Pěnčík

Keywords:

Scots pine (Pinus sylvestris); FEA; numerical modelling; elastic constants; material constants; anisotropic plasticity

Volume 66 (2015), Issue 4

Application of Reduced Stiffness of Complex Laminate in Finite Elements for Chair Analysis

Authors:

Biserka Nestorović, Ivica Grbac, Predrag Nestorović, Jelena Milošević

Keywords:

reduced stiffness; finite elements; composite; material constants; shell; chair

Volume 66 (2015), Issue 2

Some Physical and Mechanical Properties of Borate-Treated Oriental Beech Wood

Authors:

Hakan Simsek, Ergun Baysal

Keywords:

borates; oven dry density; modulus of elasticity; surface roughness; Oriental beech

Volume 66 (2015), Issue 2

Strategic Business Performance Management System in Wood Processing Industry in Slovakia

Authors:

Rastislav Rajnoha, Silvia Lorincová, Margarita Bego

Keywords:

business performance; strategic performance management system; financial indicators; wood-processing industry; Slovakia

Volume 65 (2014), Issue 4

The Influence of Global Crisis on Financial Liquidity and Changes in Corporate Debt of the Furniture Sector in Poland

Authors:

Emilia Grzegorzewska, Renata Stasiak-Betlejewska

Keywords:

financial liquidity; debt level; employment level; furniture industry; manufacturing

Volume 63 (2012), Issue 3

Determination of Fire and Burning Properties of Spruce Wood

Authors:

Martin Zachar, Iveta Mitterová, Qiang Xu, Andrea Majlingová, Jin Cong, Štefan Galla

Keywords:

spruce; fire properties; flash-ignition temperature; spontaneous ignition temperature; burning rate; ignitability

Volume 63 (2012), Issue 2

Improving of Maintenance of Humidifying System in Conventional Wood Kiln Dryers

Authors:

Miljenko Klarić, Stjepan Pervan

Keywords:

conventional wood drying kiln; wood drying; moisturizer nozzles; limescale; citric acid monohydrate

Volume 62 (2011), Issue 4

Optimization of Cutting Process of Medium Density Fibreboards by the Abrasive Water-Jet

Authors:

Štefan Barcík, Monika Kvietková, Richard Kminiak, Patrik Aláč

Keywords:

feed rate; abrasive flow; water-jet cutting; sample thickness

Volume 62 (2011), Issue 4

Accelerated Weathering of Coated and Uncoated Beech Wood Modified with Citric Acid

Authors:

Josip Miklečić, Vlatka Jirouš-Rajković

Keywords:

chemical modification; citric acid; QUV weathering; wood stain; beech wood

Volume 62 (2011), Issue 4

Sorption Models and Creation of Precision Diagrams for the Equilibrium Moisture Content

Authors:

Nencho Deliiski

Keywords:

wood sorption models; mathematical description; equilibrium moisture content; temperature; relative humidity; model-based control

Volume 62 (2011), Issue 3

Determining the Characteristics of Composite Structure Laminae by Optical 3D Measurement of Deformation with Numerical Analysis

Authors:

Biserka Nestorović, Dušan Skakić, Ivica Grbac

Keywords:

optical 3D measurement; chair; shell; composite; material constants; stress; beech wood; finite elements

Volume 61 (2010), Issue 2

Perception of Corporate Identity in Croatian and Slovakian Wood Processing and Furniture Manufacturing Companies

Authors:

Denis Jelačić, Hana Maťová, Kristina Bičanić

Keywords:

corporate identity; wood processing and furniture manufacturing; perception of corporate identity

Volume 61 (2010), Issue 2

Implementation and Analysis of Information System in a Wood Processing Company

Authors:

Patrik Aláč, Vojtech Demoč, Štefan Barcík

Keywords:

information system analysis; strength; weaknesses; opportunities; threats; strategy

Volume 60 (2009), Issue 3

Corporate identity in wood processing and furniture manufacturing in the Republic of Croatia

Authors:

Kristina Bičanić, Denis Jelačić, Vanja Gašparić, Vesna Carev-Laškarin, Miljana Kocbek-Nižetić

Keywords:

corporate identity; wood processing and furniture manufacturing; perception of corporate identity

Volume 59 (2008), Issue 1

Selected properties of spruce dust generated from sanding operations

Authors:

Alena Očkajová, Annamária Beljaková, Jana Luptáková

Keywords:

sanding; spruce dust; granularity; bulk properties

Volume 58 (2007), Issue 4

Production management within the concept of digital enterprises of wood-processing and furniture production

Authors:

Gordana Matičević, Tadija Lovrić

Keywords:

wood processing; furniture production; production management system; integrated information systems; ERP system; digital enterprise

Volume 57 (2006), Issue 2

A simple method for determination of kinetics of radial, tangential and surface swelling of wood

Authors:

Rastislav Solár, Miroslav Mamon, Stanislav Kurjatko, Richard Lang, Vladimír Vacek

Keywords:

beech-wood; spruce-wood; tension and bio-degraded wood; kinetics of swelling; relative rate constants

Volume 56 (2005), Issue 4

Determination of cutting forces in cutting wood materials

Authors:

Zdeněk Kopecký, Miroslav Rousek

Keywords:

measuring stand; wood agglomerated materials; cutting; circular saw blade

Volume 56 (2005), Issue 1

Properties of chipped wood generated during mechanical wood processing

Authors:

Ružica Beljo Lučić, Anka Ozana Čavlović, Alan Antonović, Edita Vujasinović, Ilona Šimičić

Keywords:

chipped wood material; particle size analyses; bulk density; microphotometry

Volume 56 (2005), Issue 2

Strength and durability of glued wood Part one: Factors of glued joint strength

Authors:

Goran Mihulja, Andrija Bogner

Keywords:

adhesion; glued joint; adhesives; substrate; glued joint strength; fracture area

Volume 55 (2004), Issue 4

SWOT analysis - Information support for building development strategy of the Slovakian wood industry

Authors:

Andrea Sujova

Keywords:

wood industry; restructuralisation; SWOT analysis; SWOT matrix; strategic development

Volume 55 (2004), Issue 3

Selected aspects of corporate communication in furniture sector

Authors:

Eva Drličková, Jan Dvořáček

Keywords:

corporate mission; corporate communication; mission in furniture production; promotion in furniture sector; internal communication

Volume 48 (1997), Issue 4

An investigation into the protection of wood from UV-radiation and water

Authors:

Vlatka Jirouš-Rajković, Ivica Grbac, Stjepan Tkalec

Keywords:

UV-radiation; photostabilizers; adhesion, chromium trioxide; ferric nitrate

Volume 48 (1997), Issue 3

The economic analysis of furniture production in several districts of Slovakia

Authors:

Ján Holécy, Josef Drábek, Denis Jelačić

Keywords:

furniture production; economic analysis; investment projects; internal rate of return; economic prices

Volume 47 (1996), Issue 2

Accelerated Aging of Low-Density Cement-Bonded Wood Composites Made Conventionally and With Carbon Dioxide Injection

Authors:

Robert L. Geimer, Mário Rabelo de Souza, Ali A. Moslemi

Keywords:

excelsior board; mineral board; cement; carbon dioxide; durability; cyclic test; accelerated aging; sodium silicate

Volume 46 (1995), Issue 1

Accelerated weathering of wood surfaces - The QUV accelerated weathering tester

Authors:

Vlatka Jirouš-Rajković, Hrvoje Turkulin

Keywords:

weathering; accelerated weathering tester; wood durability

Volume 45 (1994), Issue 4

Removing the original coating off a wooden substrate

Authors:

Vlatka Jirouš-Rajković

Keywords:

coating; paint stripping; sanding; scraping; chemical strippers

Volume 44 (1993), Issue 4

Relative achievement of students in timber technology department in relation to the type of secondary school they attended

Authors:

Josip Biškup

Keywords:

studenti; drvna tehnologija; uspjeh u studiju; završena srednja škola

Volume 41 (1990), Issue 11-12

International timber market in 1990 and prospects in 1991

Authors:

Dušan Oreščanin

Keywords:

supply and demand in wood products; growth rate; sawn timber market; boards market; wood-pulp market

Volume 41 (1990), Issue 5-6

Durability of coatings

Authors:

Vlatka Jirouš-Rajković

Keywords:

finishing; durability of coatings; accelerated test; coatings degradation; film glass transition temperature

Volume 40 (1989), Issue 7-8

Strategy for change of Yugoslav export structure of wood products into Italy

Authors:

Ante Ivišić

Keywords:

structure of production and export; export of wood product; Yugoslav-Italian trade

Volume 40 (1989), Issue 7-8

Kvaliteta u funkciji izvoza

Authors:

Marenka Radoš

Keywords:

kvaliteta drvnih proizvoda; dizajn pokuštva; marketing; izvozna strategija

Volume 38 (1987), Issue 1-2

Significance of determination of relative relations of job complexity

Authors:

Mladen Figurić

Keywords:

job complexity; evaluation of job

Volume 37 (1986), Issue 9-10

Integral utilization of raw material

Authors:

Vladimir Sertić

Keywords:

chemical conversion of wood; pulp and paper; thermal conversion; hydrolysis of carbohydrates; lignin; extractives

Volume 35 (1984), Issue 7-8

Efect of control system methods on stock of finished products in production of furniture

Authors:

Zvonimir Ettinger

Keywords:

control system method; system objectives; macroplan of system; data processing; microplan of system; cybernctic system; electronically operated production process

Volume 35 (1984), Issue 11-12

Determination of a rate of heat release from wood products ano structural material under exposure to fire

Authors:

Vladimir Bruči

Keywords:

rate of heat release; reaction to fire; ignitability; flame spread; release of heat

Volume 34 (1983), Issue 11-12

Free formaldehyd in production of wood based panel products

Authors:

Salah-Eldien Omer

Keywords:

free formaldehyde; method for determining the liberated formaldehyde; technical method for reduced emission of formaldehyde

Volume 31 (1980), Issue 3-4

Dynamic and structural changes in furniture, carpentry and joinery industries of the Socialist Republic of Croatia

Authors:

Radenko Milošević

Keywords:

direct rate of change; indirect rate of change; elasticity between economic variables

Volume 28 (1977), Issue 3-4

The application of break-even point analysis, rate of contribution analysis and profit-volume analysis in timber industry plant business performance analysis

Authors:

Rudolf Sabadi

Keywords:

break-even analysis; rate of contribution; P-V analysis

Volume 27 (1976), Issue 11-12

Some aspects of power consumption influence on business activity of woodworking enterprises

Authors:

Franjo Halusek

Keywords:

planning and rational power utilization; tariff rate choice

Effect of Acetylation and Accelerated Weathering of Nigerian Grown Rubberwood (Hevea brasiliensis, Müll. Arg.) on Equilibrium Moisture Content and Colour Change

Colour Change of Steamed Alder Wood Caused by UV Radiation

Long-Term Hygroscopic Thickness Swelling Rate of Hydrothermally Treated Beech Wood / Polypropylene Composites

Improving Weathering Performance of Wood by Borates Impregnation and Liquid Glass Coating

Chemical and Application Properties of Some Solvent and Water Based Coatings on Wooden Substrate

Analysis of Implementation of Integrated Information Systems in Croatian Wood Processing Industry

Effect of Accelerated Weathering Test on Selected Properties of Bamboo, Scots Pine and Oriental Beech Wood Treated with Waterborne Preservatives

Accelerated Weathering and Decay Resistance of Heat-Treated Wood Reinforced Polypropylene Composites

Surface Wettability of Wood Species from Tropical and Temperate Zones by Polar and Dispersive Liquids

Design for AAL Integrated Furniture for the Care and Support of Elderly and Disabled People

The Effects of Lignocellulosic Fillers on Mechanical, Morphological and Thermal Properties of Wood Polymer Composites

Bending Creep Behavior of Hornbeam Wood

Influencing Factors on Looseness of Chipped Material Generated during Wood Planing

Measurement of Wood Cutting Forces during Bandsawing Using Piezoelectric Dynamometer

Tests of Wooden Specimens from Scots Pine (Pinus sylvestris) with the Help of Anisotropic Plasticity Material Model

Application of Reduced Stiffness of Complex Laminate in Finite Elements for Chair Analysis

Some Physical and Mechanical Properties of Borate-Treated Oriental Beech Wood

Strategic Business Performance Management System in Wood Processing Industry in Slovakia

The Influence of Global Crisis on Financial Liquidity and Changes in Corporate Debt of the Furniture Sector in Poland

Determination of Fire and Burning Properties of Spruce Wood

Improving of Maintenance of Humidifying System in Conventional Wood Kiln Dryers

Optimization of Cutting Process of Medium Density Fibreboards by the Abrasive Water-Jet

Accelerated Weathering of Coated and Uncoated Beech Wood Modified with Citric Acid

Sorption Models and Creation of Precision Diagrams for the Equilibrium Moisture Content

Determining the Characteristics of Composite Structure Laminae by Optical 3D Measurement of Deformation with Numerical Analysis

Perception of Corporate Identity in Croatian and Slovakian Wood Processing and Furniture Manufacturing Companies

Implementation and Analysis of Information System in a Wood Processing Company

Corporate identity in wood processing and furniture manufacturing in the Republic of Croatia

Selected properties of spruce dust generated from sanding operations

Production management within the concept of digital enterprises of wood-processing and furniture production

A simple method for determination of kinetics of radial, tangential and surface swelling of wood

Determination of cutting forces in cutting wood materials

Properties of chipped wood generated during mechanical wood processing

Strength and durability of glued wood Part one: Factors of glued joint strength

SWOT analysis - Information support for building development strategy of the Slovakian wood industry

Selected aspects of corporate communication in furniture sector

An investigation into the protection of wood from UV-radiation and water

The economic analysis of furniture production in several districts of Slovakia

Accelerated Aging of Low-Density Cement-Bonded Wood Composites Made Conventionally and With Carbon Dioxide Injection

Accelerated weathering of wood surfaces - The QUV accelerated weathering tester

Removing the original coating off a wooden substrate

Relative achievement of students in timber technology department in relation to the type of secondary school they attended

International timber market in 1990 and prospects in 1991

Durability of coatings

Strategy for change of Yugoslav export structure of wood products into Italy

Kvaliteta u funkciji izvoza

Significance of determination of relative relations of job complexity

Integral utilization of raw material

Efect of control system methods on stock of finished products in production of furniture

Determination of a rate of heat release from wood products ano structural material under exposure to fire

Free formaldehyd in production of wood based panel products

Dynamic and structural changes in furniture, carpentry and joinery industries of the Socialist Republic of Croatia

The application of break-even point analysis, rate of contribution analysis and profit-volume analysis in timber industry plant business performance analysis

Some aspects of power consumption influence on business activity of woodworking enterprises

Publisher