Archive

Volume 73 (2022), Issue 3

Volume 69 (2018), Issue 3

Experimental Examination and Modification of Chip Suction System in Circular Sawing Machine

Authors:

Jacek Baranski, Marcin Jewartowski, Jan Wajs, Kazimierz A. Orlowski, Tomasz Pikala

Keywords:

sliding table saw; chip removing system; experimental study

Volume 67 (2016), Issue 1

Measurement of Wood Cutting Forces during Bandsawing Using Piezoelectric Dynamometer

Authors:

Payam Moradpour, Frieder Scholz, Kazem Doosthosseini, Asghar Tarmian

Keywords:

bandsawing; cutting forces; cutting speed; feed rate; piezoelectric dynamometer

Volume 65 (2014), Issue 4

An Innovative Approach to the Forecasting of Energetic Effects While Wood Sawing

Authors:

Kazimierz A. Orlowski, Tomasz Ochrymiuk, Anthony Atkins

Keywords:

energetic effects; cutting power; wood sawing process; sawing machines; fracture mechanics; fracture toughness

Volume 65 (2014), Issue 1

Influence of the Sawing Method on Yield of Beech Logs with Red Heartwood

Authors:

Ranko Popadić, Borislav Šoškić, Goran Milić, Nebojša Todorović, Mladen Furtula

Keywords:

beech; sawmill processing; methods of sawing; yield; red heartwood

Volume 63 (2012), Issue 1

Economical Wood Sawing with Circular Saw Blades of a New Design

Authors:

Roman Wasielewski, Kazimierz A. Orlowski, Stanislaw Szyszkowski

Keywords:

rip sawing; circular saw blade; increased yield of raw material

Volume 62 (2011), Issue 3

Sawing Capacities in the Czech Republic

Authors:

Petr Pražan

Keywords:

Czech sawmilling; sawmill production; sawing capacities; log cutting technology

Volume 61 (2010), Issue 2

Effect of Thermal Modification of Oak Wood on Sawdust Granularity

Authors:

Ladislav Dzurenda, Kazimierz A. Orlowski, Marek Grzeskiewicz

Keywords:

oak wood sawdust; thermal modification; frame sawing machine; granulometric analysis; granularity

Volume 57 (2006), Issue 3

Reduction of dustiness in sawing wood by universal circular saw

Authors:

Alena Očkajová, Ružica Beljo Lučić, Anka Ozana Čavlović, J. Terenòvá

Keywords:

wood dust; sawing; various type of saw blade; granularity

Volume 56 (2005), Issue 2

Granulometric analysis and separation options of dry sawdust exhausted from narrow-kerf frame sawing machines

Authors:

Ladislav Dzurenda, Kazimierz A. Orlowski, Roman Wasielewski

Keywords:

narrow-kerf frame sawing machine; dry sawdust; granulometric analysis; separation; environment

Volume 54 (2003), Issue 3

Circular saw mechanics, Part II: Oak sawing - influence of saw blade position

Authors:

Vlado Goglia, Stjepan Risović, Ružica Beljo Lučić, Igor Đukić

Keywords:

circular saw; cutting forces; energy standards

Volume 50 (1999), Issue 1

The tensions in the circular saw blade affecting the wood sawing quality, 1 The analysis of the factors affecting the wood sawing quality

Authors:

Stjepan Risović

Keywords:

circular saw; wood sawing; processing quality; saw blade tensions

Volume 49 (1998), Issue 1

Comparison of the yield for three methods of fir/spruce logs sawing

Authors:

Jurica Butković

Keywords:

value yield; radial sawn timber; tangential sawn timber

Volume 45 (1994), Issue 2

A contribution to the issue of oversizing sawn wood due to sawing inaccuracy

Authors:

Krešimir Babunović

Keywords:

oversizes of sawn wood; sawing inaccuracy

Volume 44 (1993), Issue 3

Influence of the sawing method on yields in fir/spruce log milling

Authors:

Jurica Butković

Keywords:

sawing methods; fir/spruce; yield

Volume 42 (1991), Issue 3-4

The yield of sawlogs with the special view upon certain elements of sawing quality

Authors:

Ružica Beljo Lučić

Keywords:

yield of sawlogs; accuracy of sawing; roughness of the sawn surface

Volume 40 (1989), Issue 9-10

Research work of standard times of operations on a log band sawing machine

Authors:

Milan Vukićević

Keywords:

log band sawing machine; time of log processing; deterministic operations; stochasitic operations; time of log sawing

Volume 34 (1983), Issue 11-12

Oversizes of sawn wood

Authors:

Marijan Brežnjak

Keywords:

oversizes of sawn wood; shrinkage; sawing inaccuracy

Volume 34 (1983), Issue 5-6

Effect of quality and sizes on yield of beechwood logs

Authors:

Ramiz Zubčević

Keywords:

yield of beechwood logs; method of sawing; single-stage and two-stage conversion

Volume 33 (1982), Issue 3-4

Qualitative comparison of different arrangement of saw blades in regard to utilization of logs on the frame-saws

Authors:

Vladimir Hitrec

Keywords:

simulation of sawing on the frame saw; volume utilization of logs; influential factors of utilization

Volume 33 (1982), Issue 5-6

Analysis of influence of log taper, log length, saw kerf width and sawing inaccuracy on volume log yield when sawn on frame-saw by method of simulation

Authors:

Vladimir Hitrec

Keywords:

simulations of sawing; frame-saw; volume log yield

Volume 33 (1982), Issue 5-6

Quality of sawing fir logs on frame-saws

Authors:

Đorđe Butković

Keywords:

quality of sawing; frame; saw

Volume 32 (1981), Issue 1-2

Determination of arrangement of saw blades by a method of simulated sawing of logs on the frame saws

Authors:

Vladimir Hitrec

Keywords:

optimization of sawing; simulation of sawing; volume utilization; value utilization

Volume 31 (1980), Issue 5-6

Influence of sawing technology on utilization of firwood logs

Authors:

Đorđe Butković

Keywords:

firwood utilization; experimental sawing; simulating sawing

Volume 31 (1980), Issue 5-6

Reestablishment of evidences and comparisons of business results in woodworking industry

Authors:

Bogomil Čop

Keywords:

conversion costs by species of wood and sawing methods; calculation of mills; comparison of business systems

Volume 30 (1979), Issue 7-8

Investigations of quantitative and qualitative utilization in sawing firwood sprucewood logs

Authors:

Ramiz Zubčević

Keywords:

sawn conifiers; quantitative and qualitative utilization

Volume 29 (1978), Issue 5-6

Utilization of low quality beech logs sawn on band saw by two different methods

Authors:

Marko Gregić

Keywords:

conversion of Iow quality beech Iogs; »radial« and »tangential« sawing on band saws; quantity, quality and value yield

Volume 29 (1978), Issue 7-8

Sawing of oak logs parallel to bark and parallel to pith

Authors:

Nevenko Petruša

Keywords:

recovery of oak logs; parallel to pith sawing; taper sawing

Volume 27 (1976), Issue 9-10

High-strain linebar - best solution to growth - stressed timber resawing

Authors:

A. Krilov

Keywords:

high-strain linebar resaw; sawmill technology; growth stress

Feed Cutting Force Component in Up and Down Sawing of Pine

Experimental Examination and Modification of Chip Suction System in Circular Sawing Machine

Measurement of Wood Cutting Forces during Bandsawing Using Piezoelectric Dynamometer

An Innovative Approach to the Forecasting of Energetic Effects While Wood Sawing

Influence of the Sawing Method on Yield of Beech Logs with Red Heartwood

Economical Wood Sawing with Circular Saw Blades of a New Design

Sawing Capacities in the Czech Republic

Effect of Thermal Modification of Oak Wood on Sawdust Granularity

Reduction of dustiness in sawing wood by universal circular saw

Granulometric analysis and separation options of dry sawdust exhausted from narrow-kerf frame sawing machines

Circular saw mechanics, Part II: Oak sawing - influence of saw blade position

The tensions in the circular saw blade affecting the wood sawing quality, 1 The analysis of the factors affecting the wood sawing quality

Comparison of the yield for three methods of fir/spruce logs sawing

A contribution to the issue of oversizing sawn wood due to sawing inaccuracy

Influence of the sawing method on yields in fir/spruce log milling

The yield of sawlogs with the special view upon certain elements of sawing quality

Research work of standard times of operations on a log band sawing machine

Oversizes of sawn wood

Effect of quality and sizes on yield of beechwood logs

Qualitative comparison of different arrangement of saw blades in regard to utilization of logs on the frame-saws

Analysis of influence of log taper, log length, saw kerf width and sawing inaccuracy on volume log yield when sawn on frame-saw by method of simulation

Quality of sawing fir logs on frame-saws

Determination of arrangement of saw blades by a method of simulated sawing of logs on the frame saws

Influence of sawing technology on utilization of firwood logs

Reestablishment of evidences and comparisons of business results in woodworking industry

Investigations of quantitative and qualitative utilization in sawing firwood sprucewood logs

Utilization of low quality beech logs sawn on band saw by two different methods

Sawing of oak logs parallel to bark and parallel to pith

High-strain linebar - best solution to growth - stressed timber resawing

Publisher