Archive

Volume 75 (2024), Issue 3

Determination of Fire Resistance, Mechanical Property and Physical Stability of Boron Phosphate Containing Wood Polymer Composites

Authors:

Mehmet Yüksel, Elif Vargün, Damla Karadayı, Aysen Yılmaz

Keywords:

boron phosphate; wood polymer composite; flame-retardant; polydiphenylmethane- 4,4’-diisocyanate (PMDI) compatibilizer

Volume 74 (2023), Issue 3

Analysis of the Effect of Gypsum-Based Fire Protection Cover on Charring of Wooden Bearing Elements

Authors:

Marie Rusinová, Miloš Lavický, Miloš Kalousek, Martin Sedlmajer

Keywords:

fire resistance; ignition temperature; gypsum plasterboard; gypsum fibreboard; fire test

Volume 74 (2023), Issue 4

Influence of Zinc Oxide Nanoparticles on Flame Resistance in Wood Plastic Composites

Authors:

Sefa Durmaz, Uğur Aras, Erkan Avcı, Ziya Yusuf Erdil, İlkay Atar, Hulya Kalaycioglu

Keywords:

ZnO nanoparticles; LOI test; TGA analysis; thermal resistance; WPC

Volume 74 (2023), Issue 2

Coloration of Lacquered Coatings for Furniture Production with Herbal Dyes and Determining Weathering Resistance

Authors:

Osman Goktas, Yasar Tahsin Bozkaya, Mehmet Yeniocak

Keywords:

furniture industry; lacquer coating; natural dyes; weathering; color changes

Volume 74 (2023), Issue 4

Bio-Durability and Engineering Characteristics of Heat-Treated Poplar Wood

Authors:

Seyedeh Masoomeh Zamani, Reza Hajihassani, Saman Ghahri

Keywords:

poplar; thermo-wood; fungus; physical and mechanical properties; biological resistance

Volume 74 (2023), Issue 2

Impact of Wood Moisture Content on Structural Integrity of Wood Under Dynamic Loads

Authors:

Lukas Emmerich, Christian Brischke

Keywords:

brittleness; High-Energy Multiple Impact (HEMI) test; moisture content; moisture states; resistance to impact milling (RIM)

Volume 74 (2023), Issue 4

Effect of Epoxy Resin Reinforcement on Screw Withdrawal Strength of Fiberboard and Particleboard Used in Furniture Industry

Authors:

Mesut Uysal, Cagatay Tasdemir, Memis Dogan

Keywords:

epoxy resin; reinforcement; screw withdrawal strength; medium density fiberboard; particleboard

Volume 73 (2022), Issue 3

Withdrawal Resistance of T-Nuts in Various Furniture Materials

Authors:

Ewa Skorupińska, Krzysztof Wiaderek, Maciej Sydor

Keywords:

T-nut; pinewood; oriented strand board; plywood; particleboard; furniture materials

Volume 73 (2022), Issue 4

Combustion and Decay Resistance Performance of Scots Pine Treated with Boron and Copper Based Wood Preservatives

Authors:

Sedat Sürdem, Cihan Eseroglu, Serhat Yildiz, Cevdet Sögütlü, Abdulkerim Yörükoglu

Keywords:

wood preservatives; decay resistance; boron compounds; combustion resistance filler

Volume 73 (2022), Issue 4

Effects of Exposure Time and Temperature on Screw Driving Torques in Heat-Treated Anatolian Black Pine and Sessile Oak Wood

Authors:

Mehmet Karamanoglu, Önder Tor

Keywords:

screw; pilot hole; seating torque; heat-treated wood

Volume 73 (2022), Issue 2

Physical and Mechanical Properties and Decay Resistance of Poplar Modified with mDMDHEU

Authors:

Huseyin Sivrikaya, Ahmet Can

Keywords:

wood modification, mDMDHEU, dimensional stability, MOR, FTIR, TGA, decay resistance

Volume 72 (2021), Issue 3

Investigation of the Effect of Using Activated Sludge Treated with Acetic Acid on Physical and Strength Properties of Recycled Pulp

Authors:

Naghmeh Amani, Ramin Vaysi, Abdollah Najafi, Seyed Eshagh Ebadi

Keywords:

activated sludge; acetic acid; newsprint paper; eco-friendly bio composite; resistance features

Volume 72 (2021), Issue 4

Decay Resistance and Color Change of Pine and Beech Wood Impregnated with R. Luteum and R. Ponticum Plant Extracts

Authors:

Huseyin Pelit, Ali Alkan, Mesut Yalçın

Keywords:

color change; decay resistance; impregnation; natural extract; wood material

Volume 72 (2021), Issue 1

The Relationship between Roughness of Finished Wood Floors and Slip Resistance

Authors:

Josip Miklečić, Vlatka Jirouš-Rajković

Keywords:

slip resistance; surface roughness; finished wood floors; surface roughness parameters

Volume 71 (2020), Issue 2

Enhanced Abrasion Resistance of Coated Particleboard Pre-Treated with Atmospheric Plasma

Authors:

Jure Žigon, Sebastian Dahle, Marko Petrič, Matjaž Pavlič

Keywords:

particleboard; plasma; coating; abrasion

Volume 70 (2019), Issue 3

Accelerated Weathering and Decay Resistance of Heat-Treated Wood Reinforced Polypropylene Composites

Authors:

Deniz Aydemir, Mizgin Alsan, Ahmet Can

Keywords:

wood polymer composites; heat-treated wood; polypropylene (PP); outdoor performance; thermoplastics

Volume 70 (2019), Issue 1

Abrasion Resistance of Thermally and Chemically Modified Timber

Authors:

Christian Brischke, Neele Ziegeler, Susanne Bollmus

Keywords:

flooring; chemical wood modification; Shaker method; Taber Abraser; thermally modified wood; wear

Volume 70 (2019), Issue 3

Physico-Mechanical Properties of Thermally Modified Eucalyptus Nitens Wood for Decking Applications

Authors:

Maximilian Wentzel, Óscar González-Prieto, Christian Brischke, Holger Militz

Keywords:

Eucalypt; anti-swelling effi ciency (ASE); hardness; abrasion resistance; timber

Volume 69 (2018), Issue 4

Weathering Resistance of Poplar Wood Coated by Organosilane Water Soluble Nanomaterials

Authors:

Hadi Gholamiyan, Asghar Tarmian

Keywords:

clear coatings; organosilane nanomaterials; weathering; wood

Volume 69 (2018), Issue 4

Screw Withdrawal Resistance and Surface Soundness of Three-Layer Fiberboard Having Coarse Fibers in Core Layer

Authors:

Nadir Ayrilmis, Turgay Akbulut

Keywords:

coarse fiber; resin; surface soundness; screw withdrawal resistance; three-layer fibreboard

Volume 69 (2018), Issue 1

Model Calibration of Prefabricated Timber Wall Frames Made of Hieronyma Alchorneoides and Gmelina Arborea Timber Using Nail and Screw Fasteners

Authors:

Tony Leiva-Leiva, Róger Moya, Angel Navarro-Mora

Keywords:

structural timber; vertical diaphragms; lateral loads; light frame; fastener; calibration model

Volume 68 (2017), Issue 1

Interrelationship between Static a nd Dynamic Strength Properties of Wood and its Structural Integrity

Authors:

Christian Brischke

Keywords:

bending strength; High-Energy Multiple Impact (HEMI) tests; impact bending strength; modulus of elasticity; Resistance to Impact Milling (RIM)

Volume 68 (2017), Issue 1

Determination of Screw Withdrawal Resistance of Some Heat-Treated Wood Species

Authors:

Osman Perçin, Şekip Şadiye Yasar, Mustafa Altunok, Oğuzhan Uzun

Keywords:

heat treatment; black pine; hornbeam; Uludağ fir; screw withdrawal resistance

Volume 67 (2016), Issue 1

Evaluation of Wood Resistance to Artificial Weathering Factors Using Compressive Properties

Authors:

Agnieszka Jankowska, Paweł Kozakiewicz

Keywords:

tropical wood; Pinus; Quercus; artificial weathering; artificial aging

Volume 67 (2016), Issue 1

Effect of Press Cycle Time on Application Behavior of Board Made from Chemically Modified Particles

Authors:

Maryam Ghorbani, Fatemeh Bavaneghi

Keywords:

press time; acetylation; particleboard; thickness swelling; mechanical strength; decay resistance

Volume 66 (2015), Issue 4

Effect of Heat Treatment of Wild Cherry Wood on Abrasion Resistance and Withdrawal Capacity of Screws

Authors:

Ayhan Aytin, Süleyman Korkut, Nusret As, Öner Ünsal, Gokhan Gunduz

Keywords:

Heat treatment; ThermoWood; abrasion resistance; withdrawal capacity of screws; Wild Cherry wood

Volume 65 (2014), Issue 2

Influence of Various Wood Species and Cross-Sections on Strength of a Dowel Welding Joint

Authors:

Ivica Župčić, Zoran Vlaović, Danijela Domljan, Ivica Grbac

Keywords:

welding of wood; dowel joints; withdrawal strength; embedded force; wood species; anatomical orientation

Volume 64 (2013), Issue 2

Natural Durability of Timber Exposed Above Ground – a Survey

Authors:

Christian Brischke, Linda Meyer, Gry Alfredsen, Miha Humar, Lesley Francis, Per-Otto Flæte, Pia Larsson-Brelid

Keywords:

durability classes; field tests; resistance factor; service life prediction; test methodology; use class 3

Volume 63 (2012), Issue 1

Optimization of Double Thread Nuts Screwing Process

Authors:

Goran Mihulja, Dominik Poljak, Tomislav Basar

Keywords:

metal angles; double thread nuts; screwing moment; time saving; extraction strength

Volume 61 (2010), Issue 4

UF-pMDI Hybrid Resin for Waterproof Particleboards Manufactured at a Shortened Pressing Time

Authors:

Dorota Dziurka, Radosław Mirski

Keywords:

particleboard; UF resin; pMDI; water resistance; mechanical properties

Volume 53 (2002), Issue 3

Variable elements of plywood water resistance

Authors:

Jaroslav Kljak, Mladen Brezović, Vladimir Jambreković

Keywords:

veneer plywood; bonding quality; water resistance

Volume 53 (2002), Issue 4

Recycled paper – the influence of digital prints

Authors:

Branka Lozo, Ivana Bolanča, Zdenka Bolanča, Damir Modrić

Keywords:

Recycled fibres; mechanical properties; tensile strength; tearing resistance; bursting resistance; digital offset printing; conventional offset printing

Volume 48 (1997), Issue 2

Beechwood finger-joints applied at an angle

Authors:

Stjepan Tkalec, Silvana Prekrat, Marko Žmire

Keywords:

wood constructions for furniture; finger joints; static and dynamic loadings; resistance of the joints

Volume 47 (1996), Issue 4

Testing the joint strength of wooden rests on bed frames

Authors:

Stjepan Tkalec, Ivica Grbac, Silvana Prekrat

Keywords:

wood constructions; beds; adhesive strength; joint-holding; strength; screw/dowel-holding strength

Volume 47 (1996), Issue 3

Methods for Testing the Resistance of Wood Hotmelt Adhesives to Temperature Changes and Weathering

Authors:

Andrija Bogner, Boris Ljuljka, Ivica Grbac

Keywords:

hotmelts; edge-bonding strength; testing methods

Volume 45 (1994), Issue 3

A contribution to the study of cutting resistance of milled beech

Authors:

Stjepan Risović

Keywords:

woodworking; beech; milling; cutting resistance

Volume 45 (1994), Issue 1

Temperature resistance and durability of hotmelts

Authors:

Željko Šonje, Boris Ljuljka

Keywords:

hotmelts; edgebonding; heat resistance; durability

Volume 44 (1993), Issue 4

A contribution to the study of cutting resistance with machining of fir

Authors:

Stjepan Risović

Keywords:

wood maschining; fir; milling; cutting resistance

Volume 44 (1993), Issue 3

Preliminary research on manufacturing water-resistant particleboards

Authors:

Vladimir Bruči, Ilija Panjković, Đurđica Trninić

Keywords:

particleboards; water-resistance; physical and mechanical properties; type of adhesive; V20 and V l00

Volume 41 (1990), Issue 9-10

Research on change of fire resistance of steel galvanized metal sheet doors after being veneered on both surfaces

Authors:

Mirko Gornik

Keywords:

fire resistance; veneer paneling; glued joints

Volume 38 (1987), Issue 5-6

Electric properties and water content measurement in the wood

Authors:

Stanislav Bađun, Slavko Govorčin, Jasenka Babić

Keywords:

electric resistance; moisture level in wood; electric hygrometers

Volume 36 (1985), Issue 5-6

Fire retardant chemicals for increase of fire resistance of high density fibreboards manufactured by dry process and mdf boards

Authors:

Vladimir Bruči, Marina Tatalović

Keywords:

fire retardant agent; flame spread index

Volume 36 (1985), Issue 5-6

Production of fire retardant particleboards

Authors:

Salah-Eldien Omer

Keywords:

fire retardant particleboard; physicaI and mechanical properties; fire resistance

Volume 32 (1981), Issue 7-8

Windows testing in West Germany

Authors:

Luka Jereb

Keywords:

characteristic fit; air escape; specific air escape; resistance to driving rain

Volume 32 (1981), Issue 9-10

Resistance of plywood to pressure and compression perpendicular to sheet surface in laminated constructions

Authors:

M. M. Guskov

Keywords:

resistance to pressure and compression; laminated buliding constrrictions; deformation of linear-elastic layer; surface roughness module of surface deformation

Volume 31 (1980), Issue 11-12

Hardware and quality of furniture

Authors:

Dragutin Puzak, Božidar Sinković

Keywords:

rear joints on chair by means of screws; joint strength testing; static and dynamic strains

Volume 30 (1979), Issue 4

Durability of joints glued with PVA adhesives under exterior conditions

Authors:

Boris Ljuljka, Željko Šonje

Keywords:

durability of glued joints; water-resistance of adhesives; strength of joints

Volume 28 (1977), Issue 7-8

Influential parameters on laminated particleboards quality in shorttact treatment

Authors:

Stjepan Petrović

Keywords:

laminating particleboards in shorttact treatment; experiment factors plan; hardening degree and resistance to wearing; explained part of factors influence

Determination of Fire Resistance, Mechanical Property and Physical Stability of Boron Phosphate Containing Wood Polymer Composites

Analysis of the Effect of Gypsum-Based Fire Protection Cover on Charring of Wooden Bearing Elements

Influence of Zinc Oxide Nanoparticles on Flame Resistance in Wood Plastic Composites

Coloration of Lacquered Coatings for Furniture Production with Herbal Dyes and Determining Weathering Resistance

Bio-Durability and Engineering Characteristics of Heat-Treated Poplar Wood

Impact of Wood Moisture Content on Structural Integrity of Wood Under Dynamic Loads

Effect of Epoxy Resin Reinforcement on Screw Withdrawal Strength of Fiberboard and Particleboard Used in Furniture Industry

Withdrawal Resistance of T-Nuts in Various Furniture Materials

Combustion and Decay Resistance Performance of Scots Pine Treated with Boron and Copper Based Wood Preservatives

Effects of Exposure Time and Temperature on Screw Driving Torques in Heat-Treated Anatolian Black Pine and Sessile Oak Wood

Physical and Mechanical Properties and Decay Resistance of Poplar Modified with mDMDHEU

Investigation of the Effect of Using Activated Sludge Treated with Acetic Acid on Physical and Strength Properties of Recycled Pulp

Decay Resistance and Color Change of Pine and Beech Wood Impregnated with R. Luteum and R. Ponticum Plant Extracts

The Relationship between Roughness of Finished Wood Floors and Slip Resistance

Enhanced Abrasion Resistance of Coated Particleboard Pre-Treated with Atmospheric Plasma

Accelerated Weathering and Decay Resistance of Heat-Treated Wood Reinforced Polypropylene Composites

Abrasion Resistance of Thermally and Chemically Modified Timber

Physico-Mechanical Properties of Thermally Modified Eucalyptus Nitens Wood for Decking Applications

Weathering Resistance of Poplar Wood Coated by Organosilane Water Soluble Nanomaterials

Screw Withdrawal Resistance and Surface Soundness of Three-Layer Fiberboard Having Coarse Fibers in Core Layer

Model Calibration of Prefabricated Timber Wall Frames Made of Hieronyma Alchorneoides and Gmelina Arborea Timber Using Nail and Screw Fasteners

Interrelationship between Static a nd Dynamic Strength Properties of Wood and its Structural Integrity

Determination of Screw Withdrawal Resistance of Some Heat-Treated Wood Species

Evaluation of Wood Resistance to Artificial Weathering Factors Using Compressive Properties

Effect of Press Cycle Time on Application Behavior of Board Made from Chemically Modified Particles

Effect of Heat Treatment of Wild Cherry Wood on Abrasion Resistance and Withdrawal Capacity of Screws

Influence of Various Wood Species and Cross-Sections on Strength of a Dowel Welding Joint

Natural Durability of Timber Exposed Above Ground – a Survey

Optimization of Double Thread Nuts Screwing Process

UF-pMDI Hybrid Resin for Waterproof Particleboards Manufactured at a Shortened Pressing Time

Variable elements of plywood water resistance

Recycled paper – the influence of digital prints

Beechwood finger-joints applied at an angle

Testing the joint strength of wooden rests on bed frames

Methods for Testing the Resistance of Wood Hotmelt Adhesives to Temperature Changes and Weathering

A contribution to the study of cutting resistance of milled beech

Temperature resistance and durability of hotmelts

A contribution to the study of cutting resistance with machining of fir

Preliminary research on manufacturing water-resistant particleboards

Research on change of fire resistance of steel galvanized metal sheet doors after being veneered on both surfaces

Electric properties and water content measurement in the wood

Fire retardant chemicals for increase of fire resistance of high density fibreboards manufactured by dry process and mdf boards

Production of fire retardant particleboards

Windows testing in West Germany

Resistance of plywood to pressure and compression perpendicular to sheet surface in laminated constructions

Hardware and quality of furniture

Durability of joints glued with PVA adhesives under exterior conditions

Influential parameters on laminated particleboards quality in shorttact treatment

Publisher