Archive

Volume 75 (2024), Issue 2

Volume 75 (2024), Issue 3

Comparing Wettability and Surface Free Energy of False Heartwood, Ripe Wood and Sapwood in Beech (Fagus sylvatica L.)

Authors:

Barbora Slováčková, Oľga Mišíková, Jarmila Schmidtová

Keywords:

beech; false heartwood; light microscopy; surface free energy; wettability

Volume 75 (2024), Issue 3

Optimization of Energy Consumption During Industrial Veneer Drying – A Preliminary Assessment

Authors:

Qing Qiu, Julie Cool

Keywords:

data-driven approach; minimize energy cost; maximize quality turnout; veneer drying case study; process improvement

Volume 74 (2023), Issue 2

Impact of Wood Moisture Content on Structural Integrity of Wood Under Dynamic Loads

Authors:

Lukas Emmerich, Christian Brischke

Keywords:

brittleness; High-Energy Multiple Impact (HEMI) test; moisture content; moisture states; resistance to impact milling (RIM)

Volume 73 (2022), Issue 4

Fracture Behavior of Wood Under Mode I Loading in Tangential Direction

Authors:

Arif Caglar Konukcu

Keywords:

fracture; fracture toughness; southern yellow pine; red oak; specific fracture energy

Volume 72 (2021), Issue 3

Potencijal i uloga biomase u hrvatskoj i europskoj energetskoj tranziciji (Potential and Role of Biomass in Croatian and European Energy Transition)

Authors:

Helena Biljuš, Martina Basarac Sertić

Keywords:

biomass; energy transition; Croatia, European Union; European Green Deal

Volume 72 (2021), Issue 4

The Influence of Pulping Process and Energy Consumption on Properties of Nanofibrillated Lignocellulose (NFLC) Films Isolated from Wheat Straw

Authors:

Bita Moezzipour, Sahab Hedjazi, Hossein Yousefi, Mohammad Ahmadi

Keywords:

nanofibrillated lignocellulose; wheat straw; soda and MEA pulping; energy consumption

Volume 72 (2021), Issue 4

The Influence of Heating Degree Days on Fuelwood Consumption in Households in Selected Countries of Central and Southeastern Europe

Authors:

Slavica Petrović

Keywords:

heating degree days; heating season; fuelwood; households; space heating

Volume 71 (2020), Issue 4

Possibilities of Increasing Renewable Energy in Croatia, Slovenia and Slovakia – Wood Pellets

Authors:

Ivana Perić, Andreja Pirc Barčić, Petra Grošelj, Leon Oblak, Darko Motik, Vladislav Kaputa, Branko Glavonjić, Margarita Bego

Keywords:

wood industry; wood pellets; renewable energy source; Croatia; Slovenia; Slovakia; households

Volume 71 (2020), Issue 1

Impact of Irregular Tooth Pitch of Circular Saw Blades on Power for Wood Cross-Cutting

Authors:

Jozef Krilek, Miroslava Ťavodová, Ján Kováč, Branislav Tichý

Keywords:

energy consumption; cross-cutting wood; circular saw blades; cutting power; irregular tooth pitch

Volume 68 (2017), Issue 1

Interrelationship between Static a nd Dynamic Strength Properties of Wood and its Structural Integrity

Authors:

Christian Brischke

Keywords:

bending strength; High-Energy Multiple Impact (HEMI) tests; impact bending strength; modulus of elasticity; Resistance to Impact Milling (RIM)

Volume 68 (2017), Issue 4

Surface Wettability of Wood Species from Tropical and Temperate Zones by Polar and Dispersive Liquids

Authors:

Agnieszka Laskowska, Paweł Kozakiewicz

Keywords:

contact angle; diiodomethane; surface free energy; water; wettability

Volume 68 (2017), Issue 2

Operational vs. Embodied Energy: a Case for Wood Construction

Authors:

Laszlo Bejo

Keywords:

climate change; embodied energy; emissions; carbon-dioxide; carbon sequestration; wood based construction

Volume 67 (2016), Issue 4

Wood Waste Turned Into Value Added Products: Thermal Plasticization by Benzylation Process

Authors:

Birol Üner, Gökhan Köse, Yeşim Yürümez, Ömer Ümit Yalçın, Mehmet Akgül

Keywords:

thermoplastic resin; hydrogen bond energy; crystallinity; thermal properties

Volume 67 (2016), Issue 4

Modeling and Energy Consumption of Unilateral Heating Process of Flat Wood Details

Authors:

Nencho Deliiski, Neno Trichkov, Dimitar Angelski, Ladislav Dzurenda

Keywords:

unilateral heating; modeling; wood details; plasticizing; bendin; specific energy consumption

Volume 67 (2016), Issue 3

Calorific Value and Chemical Properties in Juvenile and Mature Wood of Thermally-Modified Eucalyptus Grandis

Authors:

Fred Willians Calonego, Elias Taylor Durgante Severo, Cláudio Angeli Sansígolo, Marcos Antonio de Rezende, Edson Marcelo Bruder, Vladimir Eliodoro Costa

Keywords:

biomass; energy; chemical properties; Eucalypts; thermally-modified wood

Volume 67 (2016), Issue 3

Cutting Power during Milling of Thermally Modified Pine Wood

Authors:

Andrzej Krauss, Magdalena Piernik, Grzegorz Pinkowski

Keywords:

woodworking; thermal modification; cutting; lengthwise milling; power consumption; softwood; Pinus sylvestris L

Volume 67 (2016), Issue 1

Influence of Thermal Modification on Surface Properties and Chemical Composition of Beech Wood (Fagus sylvatica L.)

Authors:

Josip Miklečić, Vlatka Jirouš-Rajković

Keywords:

thermal modification; contact angle; surface free energy; wood chemical composition

Volume 66 (2015), Issue 2

Study on Energy Requirement of Wood Chip Compaction

Authors:

Zoltán Kocsis, Etele Csanády

Keywords:

chip fraction; compaction; pellet diameter; temperature effect; compaction work; dimensionless numbers

Volume 65 (2014), Issue 4

The Impact of Design Parameters of a Horizontal Wood Splitter on Splitting Force

Authors:

Keywords:

horizontal splitter; energy consumption; splitting force; splitting wedge

Volume 65 (2014), Issue 4

Energy Consumption of Beech Timber Drying in Oscillation Climates

Authors:

Goran Milić, Branko Kolin, Nebojša Todorović, Željko Gorišek

Keywords:

wood drying; energy consumption; conventional drying; oscillation climates; beech timber

Volume 65 (2014), Issue 3

Variation in Mechanical Properties within Individual Annual Rings in the Resonance Spruce Wood (Picea abies (L.) Karst.)

Authors:

Waldemar Moliński, Edward Roszyk, Jakub Puszyński

Keywords:

resonance wood; spruce wood; specific modulus of elasticity; specific tensile strength; MFA

Volume 65 (2014), Issue 2

Specific Heat Capacity of Wood

Authors:

Kristijan Radmanović, Igor Đukić, Stjepan Pervan

Keywords:

specific heat capacity; wood; moisture content; temperature

Volume 63 (2012), Issue 3

Energy-Efficient Renovation Principles for Prefabricated Timber-Frame Residential Buildings

Authors:

Vesna Žegarac, Miroslav Premrov, Manja Kitek-Kuzman

Keywords:

timber building; glazing; energy efficiency; renovation

Volume 63 (2012), Issue 3

Drying Kinetics of Poplar (Populus Deltoides) Wood Particles by a Convective Thin Layer Dryer

Authors:

Hamid Zarea Hosseinabadi, Kazem Doosthosseini, Mohammad Layeghi

Keywords:

Poplar wood particles; thin layer dryer; drying kinetics model; effective moisture diffusivity; activation energy

Volume 61 (2010), Issue 1

Energy Characteristics of Wood-Chips Produced from Salix Viminalis - Clone ULV

Authors:

Ladislav Dzurenda, Jarmila Geffertova, Vladimir Hecl

Keywords:

higher heating value; lower heating value; salix wood and bark; wood chips; energy plantations

Volume 60 (2009), Issue 4

Estimating the extent of influence of two intrinsic fuelwood properties on acceptance/retention of some woody species in agroforestry practices in southwest Nigeria

Authors:

Andrew Erakhrumen

Keywords:

agroforestry; biomass; biofuel; fuelwood; net calorific value; species selectivity; specific gravity; prioritization; sub-Sahara Africa

Volume 57 (2006), Issue 4

Influence of molar transfer coefficient on pressure distribution in beech lumber during its convective-vacuum drying

Authors:

Nencho Deliiski, Altay Syuleymanov

Keywords:

vacuum drying; pressure distribution; molar transfer coefficient; specific mass capacity; beech wood

Volume 57 (2006), Issue 4

Comparison of gross energy standards of framesaws and bandsaws

Authors:

Igor Đukić, Vlado Goglia

Keywords:

framesaw; bandsaw; gross energy standard

Volume 57 (2006), Issue 1

Influence of specific pressure on cutting power and wood removal by disc sander

Authors:

Anton Samolej, Štefan Barcík

Keywords:

sand disc; specific pressure; wood removal; cutting power; grit size; grain direction

Volume 56 (2005), Issue 1

New methodology for assesment of socioeconomic aspects of bioenergy systems

Authors:

Julije Domac, Nike Krajnc

Keywords:

biomass; socio-economic impacts; employment

Volume 56 (2005), Issue 3

Monitoring of power consumption in high-speed milling

Authors:

Miroslav Rousek, Zdeněk Kopecký

Keywords:

wood machining; milling; high-speed; measurement; measuring stand

Volume 55 (2004), Issue 4

Modeling and automatic control of heat energy consumption required for thermal treatment of logs

Authors:

Nencho Deliiski

Keywords:

heat energy; mathematical model; automatic control; thermal conductivity; FORTRAN; logs

Volume 54 (2003), Issue 3

Circular saw mechanics, Part II: Oak sawing - influence of saw blade position

Authors:

Vlado Goglia, Stjepan Risović, Ružica Beljo Lučić, Igor Đukić

Keywords:

circular saw; cutting forces; energy standards

Volume 54 (2003), Issue 3

Determination of the ability of wooden surface for gluing

Authors:

Andrija Bogner, Ivica Grbac, Stjepan Risović

Keywords:

work of adhesion; wetting angle; critical surface energy; roughness factor; optimum surface tension of adhesives

Volume 53 (2002), Issue 2

Circular saw mechanics, Part I: Determination of the saw blade position

Authors:

Vlado Goglia, Stjepan Risović, Ružica Beljo Lučić, Igor Đukić

Keywords:

circular saw; cutting quality; energy standards

Volume 50 (1999), Issue 3

Residue in wood processing of Zagreb County

Authors:

Julije Domac, Stjepan Risović, Stanislav Sever

Keywords:

wood residue; forest biomass; co-generation; energy

Volume 48 (1997), Issue 2

MDF - world trend

Authors:

Vladimir Jambreković, Vladimir Bruči

Keywords:

MDF; quality of MDF; use of MDF; consumption of the world; the world production; installation of capacity; export; import

Volume 47 (1996), Issue 3

Establishment of specific drying energy of oak-wood flooring deal and thermodynamic model of drying

Authors:

Miljenko Primorac, Stjepan Risović

Keywords:

drying energy of wood; specific energy of wood drying; irreversible heat engine; thermodynamic model of wood proceses; capillary diameters of wood structure; moisture of wood and structural openings; heat of evaporation

Volume 46 (1995), Issue 2

Application of Hamm’s approximate method of electric power determination for transport means research

Authors:

Ružica Beljo Lučić, Jaromir Malek

Keywords:

consumed electric energy; pneumatic and mechanical conveyor

Volume 46 (1995), Issue 4

Work of adhesion as criterion for determination of optimum surface tension in adhesives

Authors:

Andrija Bogner

Keywords:

wetting angle; work of adhesion; critical surface energy; roughness; optimum surface tension of adhesives

Volume 45 (1994), Issue 4

Wood residue as secondary energy agency

Authors:

Stjepan Risović

Keywords:

biomass; wood residue; wood waste

Volume 45 (1994), Issue 2

Energy and economic features of gantry crane at log storage

Authors:

Ružica Beljo Lučić

Keywords:

gantry crane; energy consumption; electrical power; costs

Volume 43 (1992), Issue 3

Gluing of fir with lignin-based adhesives using the conventional and the RF-method

Authors:

Andrija Bogner, Vlatka Jirouš-Rajković, Vladimir Sertić, Hrvoje Turkulin

Keywords:

gluing of fir; lignin based adhesives; intensification of adhesive; curing by conduction and RF energy

Volume 43 (1992), Issue 2

Research in the application of front milling to the processing of plain surfaces

Authors:

Vlado Goglia, Antun Šoštarić

Keywords:

front milling; plane surface machining; specific cutting energy; roughness

Volume 40 (1989), Issue 1-2

Technological properties of urea bonded resins important for particleboard production

Authors:

Vladimir Bruči, Marina Tatalović

Keywords:

application of glue by spraying method; size of glue drops; glue consumption; glue application

Volume 37 (1986), Issue 3-4

A contribution to fuel consumption investigation of special furniture-vans

Authors:

Stanislav Sever, Dubravko Horvat, Vlado Goglia, Vlado Đurašević

Keywords:

furniture-van; fuel consumption

Volume 35 (1984), Issue 3-4

Activation energy of curing of furfuryl alcohol resin in the presence of wood

Authors:

Jovan Miljković

Keywords:

Volume 35 (1984), Issue 9-10

Energy production from wood residue, based on recent achievement of energetics

Authors:

Miroslav Markeš

Keywords:

wood residue; energy production; increased utilization; cogeneration

Volume 35 (1984), Issue 11-12

Consumption of energy at kiln drying of lumber and potential solutions for its saving

Authors:

Mirko Ilić

Keywords:

kiln drying-consumption of thermal and electrical energy; drying rough dimension stock; drying sawn boards; manufacture of elements

Volume 34 (1983), Issue 1-2

Economy of heat in two presses alternately heated and cooled

Authors:

Milan Bansky, Ondrej Luptak

Keywords:

economy of heat; interconnection of heat systems of two presses; peak in steam consumption

Volume 34 (1983), Issue 5-6

Non-stationary temperature changes in drying wood chambers during their cooling-off period

Authors:

Miljenko Primorac, Đuro Hamm

Keywords:

wood drying chambers; non stationary conducting of thermal energy; thermal stability; solar energy

Volume 32 (1981), Issue 7-8

Windows testing in West Germany

Authors:

Luka Jereb

Keywords:

characteristic fit; air escape; specific air escape; resistance to driving rain

Volume 30 (1979), Issue 9-10

Some possibilities of industrial processing of bark and waste - Production of thermal energy

Authors:

Stjepan Petrović

Keywords:

bark and waste burning; caloric value of waste

Volume 30 (1979), Issue 11-12

Contribution to investigation of influence of some factors on impact bending of some important commercial wood species

Authors:

Stanislav Bađun

Keywords:

impact bending; influence of specific gravity and the moisture content

Volume 28 (1977), Issue 9-10

Rationalization of veneer consumption in furniture manufacture

Authors:

Rudolf Truc

Keywords:

veneer utilization in furniture manufacture; veneer preparation; veneer splicing

Volume 27 (1976), Issue 11-12

Some aspects of power consumption influence on business activity of woodworking enterprises

Authors:

Franjo Halusek

Keywords:

planning and rational power utilization; tariff rate choice

A Benchmark for a New Nearly Zero Energy Wooden Building in Europe

Comparing Wettability and Surface Free Energy of False Heartwood, Ripe Wood and Sapwood in Beech (Fagus sylvatica L.)

Optimization of Energy Consumption During Industrial Veneer Drying – A Preliminary Assessment

Impact of Wood Moisture Content on Structural Integrity of Wood Under Dynamic Loads

Fracture Behavior of Wood Under Mode I Loading in Tangential Direction

Potencijal i uloga biomase u hrvatskoj i europskoj energetskoj tranziciji (Potential and Role of Biomass in Croatian and European Energy Transition)

The Influence of Pulping Process and Energy Consumption on Properties of Nanofibrillated Lignocellulose (NFLC) Films Isolated from Wheat Straw

The Influence of Heating Degree Days on Fuelwood Consumption in Households in Selected Countries of Central and Southeastern Europe

Possibilities of Increasing Renewable Energy in Croatia, Slovenia and Slovakia – Wood Pellets

Impact of Irregular Tooth Pitch of Circular Saw Blades on Power for Wood Cross-Cutting

Interrelationship between Static a nd Dynamic Strength Properties of Wood and its Structural Integrity

Surface Wettability of Wood Species from Tropical and Temperate Zones by Polar and Dispersive Liquids

Operational vs. Embodied Energy: a Case for Wood Construction

Wood Waste Turned Into Value Added Products: Thermal Plasticization by Benzylation Process

Modeling and Energy Consumption of Unilateral Heating Process of Flat Wood Details

Calorific Value and Chemical Properties in Juvenile and Mature Wood of Thermally-Modified Eucalyptus Grandis

Cutting Power during Milling of Thermally Modified Pine Wood

Influence of Thermal Modification on Surface Properties and Chemical Composition of Beech Wood (Fagus sylvatica L.)

Study on Energy Requirement of Wood Chip Compaction

The Impact of Design Parameters of a Horizontal Wood Splitter on Splitting Force

Energy Consumption of Beech Timber Drying in Oscillation Climates

Variation in Mechanical Properties within Individual Annual Rings in the Resonance Spruce Wood (Picea abies (L.) Karst.)

Specific Heat Capacity of Wood

Energy-Efficient Renovation Principles for Prefabricated Timber-Frame Residential Buildings

Drying Kinetics of Poplar (Populus Deltoides) Wood Particles by a Convective Thin Layer Dryer

Energy Characteristics of Wood-Chips Produced from Salix Viminalis - Clone ULV

Estimating the extent of influence of two intrinsic fuelwood properties on acceptance/retention of some woody species in agroforestry practices in southwest Nigeria

Influence of molar transfer coefficient on pressure distribution in beech lumber during its convective-vacuum drying

Comparison of gross energy standards of framesaws and bandsaws

Influence of specific pressure on cutting power and wood removal by disc sander

New methodology for assesment of socioeconomic aspects of bioenergy systems

Monitoring of power consumption in high-speed milling

Modeling and automatic control of heat energy consumption required for thermal treatment of logs

Circular saw mechanics, Part II: Oak sawing - influence of saw blade position

Determination of the ability of wooden surface for gluing

Circular saw mechanics, Part I: Determination of the saw blade position

Residue in wood processing of Zagreb County

MDF - world trend

Establishment of specific drying energy of oak-wood flooring deal and thermodynamic model of drying

Application of Hamm’s approximate method of electric power determination for transport means research

Work of adhesion as criterion for determination of optimum surface tension in adhesives

Wood residue as secondary energy agency

Energy and economic features of gantry crane at log storage

Gluing of fir with lignin-based adhesives using the conventional and the RF-method

Research in the application of front milling to the processing of plain surfaces

Technological properties of urea bonded resins important for particleboard production

A contribution to fuel consumption investigation of special furniture-vans

Activation energy of curing of furfuryl alcohol resin in the presence of wood

Energy production from wood residue, based on recent achievement of energetics

Consumption of energy at kiln drying of lumber and potential solutions for its saving

Economy of heat in two presses alternately heated and cooled

Non-stationary temperature changes in drying wood chambers during their cooling-off period

Windows testing in West Germany

Some possibilities of industrial processing of bark and waste - Production of thermal energy

Contribution to investigation of influence of some factors on impact bending of some important commercial wood species

Rationalization of veneer consumption in furniture manufacture

Some aspects of power consumption influence on business activity of woodworking enterprises

Publisher