Archive

Volume 74 (2023), Issue 3

Criterion for Objective Determination of Threshold Value in Filtering Surface Roughness Signal of Solid Wood After Machining with Fast Fourier Transform (FFT) Based Filter

Authors:

Igor Đukić, Juraj Jovanović, Ivica Župčić, Matija Jug

Keywords:

machined surface roughness; anatomical roughness; circular saw; solid wood; signal analysis; threshold; FFT

Volume 73 (2022), Issue 4

Effects of CNC Processing Parameters on Surface Quality of Wood-Based Panels Used in Furniture Industry

Authors:

Aydin Demir, Evren Osman Cakiroglu, Ismail Aydin

Keywords:

wood-based panel; CNC milling machine; surface roughness; processing parameters

Volume 73 (2022), Issue 2

Analysis of Circular Saw Tooth Marks Profile on Material Machined Surface After Filtering with Fast Fourier Transform (FFT)

Authors:

Igor Đukić, Miran Merhar, Juraj Jovanović, Darko Herceg

Keywords:

machined surface roughness, circular saw, solid wood, signal analysis, FFT

Volume 70 (2019), Issue 1

Comparison of Surface Quality and Tool-Life of Glulam Window Elements after Planing

Authors:

Michal Dobrzynski, Kazimierz A. Orlowski, Michal Biskup

Keywords:

planing process; pine wood; window frame; surface quality; 2D/3D surface texture

Volume 69 (2018), Issue 3

Experimental Examination and Modification of Chip Suction System in Circular Sawing Machine

Authors:

Jacek Baranski, Marcin Jewartowski, Jan Wajs, Kazimierz A. Orlowski, Tomasz Pikala

Keywords:

sliding table saw; chip removing system; experimental study

Volume 66 (2015), Issue 1

Log Splitter Design and Construction

Authors:

Marián Minárik, Júlia Hricová

Keywords:

log splitter; splitting cone; material selection; tool geometry; wood splitting

Volume 65 (2014), Issue 4

An Innovative Approach to the Forecasting of Energetic Effects While Wood Sawing

Authors:

Kazimierz A. Orlowski, Tomasz Ochrymiuk, Anthony Atkins

Keywords:

energetic effects; cutting power; wood sawing process; sawing machines; fracture mechanics; fracture toughness

Volume 65 (2014), Issue 1

A Method and Device for 3D Recognition of Cutting Edge Micro Geometry

Authors:

Bartosz Palubicki, Michal Szulc, Jakub Sandak, Gerhard Sinn, Kazimierz A. Orlowski

Keywords:

cutting tool wear; 3D scanner; micro geometry

Volume 64 (2013), Issue 1

CE Marking of Structural Timber: the European Standardization Framework and its Effects on Italian Manufacturers

Authors:

Francesco Negro, Corrado Cremonini, Roberto Zanuttini

Keywords:

structural timber; normative framework; CE marking; visual grading; machine grading

Volume 62 (2011), Issue 1

Application of Neural Network in Simple Tool Wear Monitoring and Indentification System in MDF Milling

Authors:

Marcin Zbieć

Keywords:

tool wear; wood machining monitoring; tool condition diagnostic system

Volume 61 (2010), Issue 3

Veneer Densification as a Tool for Shortening of Plywood Pressing Time

Authors:

Agnieszka Kurowska, Piotr Borysiuk, Mariusz L. Mamiński, Marcin Zbieć

Keywords:

plywood; veneer densification; pressing time; shear strengths

Volume 61 (2010), Issue 2

Effect of Thermal Modification of Oak Wood on Sawdust Granularity

Authors:

Ladislav Dzurenda, Kazimierz A. Orlowski, Marek Grzeskiewicz

Keywords:

oak wood sawdust; thermal modification; frame sawing machine; granulometric analysis; granularity

Volume 60 (2009), Issue 4

Effect of Feed Speed and Wood Species on Roughness of Machined Surface

Authors:

Nedim Škaljić, Ružica Beljo Lučić, Anka Ozana Čavlović, Murčo Obućina

Keywords:

surface roughness; wood planing; feed speed; wood species

Volume 60 (2009), Issue 2

Utilization of contribution margin in the costing system in production of components for wood working machines

Authors:

Marek Potkány, Miloš Hitka

Keywords:

calculation; costing; cost; profit; contribution margin

Volume 59 (2008), Issue 4

Influence of saw blade clearance over the workpiece on tool-wear

Authors:

Mikuláš Siklienka, Luboš Mišura

Keywords:

circular saw; tool-wear; clearance; saw blade

Volume 56 (2005), Issue 3

Project of instrumentation of cyclic multiple-spindle driller aimed at improving its machining efficiency

Authors:

Grzegorz Wieloch, Marcin Osajda

Keywords:

multiple-spindle drilling machine; instrumentation; effectiveness

Volume 56 (2005), Issue 2

Granulometric analysis and separation options of dry sawdust exhausted from narrow-kerf frame sawing machines

Authors:

Ladislav Dzurenda, Kazimierz A. Orlowski, Roman Wasielewski

Keywords:

narrow-kerf frame sawing machine; dry sawdust; granulometric analysis; separation; environment

Volume 51 (2000), Issue 2

The combined machine’s short work breaks as quality indicators of air conveyors work

Authors:

Ankica Kos Pervan, Dubravko Horvat, Krešimir Šega

Keywords:

air conveyors work quality; wood dust cleaning; short work breaks; respirable fraction wood particles

Volume 46 (1995), Issue 2

Research of noise levels emitted by two-spindle moulders

Authors:

Ružica Beljo Lučić, Vlado Goglia

Keywords:

noise; woodworking machinery; noise protection

Volume 41 (1990), Issue 9-10

Edge bending small machines

Authors:

Stjepan Tkalec

Keywords:

edge banding machine; gluing of edge strips and veneer; capacity and flexibility, technology of edge lining

Volume 40 (1989), Issue 7-8

Producing veneer of oak (quercus robur erch) by pyramidal cutting

Authors:

Franjo Penzar

Keywords:

oak wood; pyramidal cut; cutting with standard equipment; peeling-machine.

Volume 40 (1989), Issue 9-10

Research work of standard times of operations on a log band sawing machine

Authors:

Milan Vukićević

Keywords:

log band sawing machine; time of log processing; deterministic operations; stochasitic operations; time of log sawing

Volume 38 (1987), Issue 11-12

Optimization of operation mode on wood working machines with a constant main cutting speed

Authors:

Vlado Goglia

Keywords:

cutting process; mathematical model of function criterion of optimization

Volume 35 (1984), Issue 3-4

Queueing theory and simulations in optimization of volume of maintainance service in industry

Authors:

Dalibor Benić

Keywords:

organization of production; maintainance of machines and equipment; appllication of queueing theory; application of simulations; operations research

Volume 33 (1982), Issue 5-6

Fine planing, one of operation of surface treatment

Authors:

Stjepan Tkalec

Keywords:

surface quality; fine planing; additionally chamfered blades; hydraulic tightening of tools

Volume 33 (1982), Issue 11-12

Preparation of tools as one of factors for quality gluing of timber

Authors:

Vladimir Hajdin

Keywords:

radius of blade travel; feed per stroke; wave depth

Volume 31 (1980), Issue 11-12

Production of woodworking machines in the SR of Croatia

Authors:

Mario Štambuk

Keywords:

woodworking machines in the SR of Croatia; development of production of woodworking machines

Volume 28 (1977), Issue 1-2

Net planning technique application in term determination and control with the calculation on electronic computing machine

Authors:

Vjekoslav Međurečan, Zlatko Rupnik

Keywords:

net planning technique; net diagram; the earliest and the latest activity beginning; the earliest and the latest activity ending

Volume 27 (1976), Issue 9-10

Tool maintenance in woodworking industry

Authors:

Ivan Kovač

Keywords:

tool maintenance; tool sharpening; tool sharpening machine; abrasive plates

Volume 26 (1975), Issue 9-10

Standard operation time system on some machines for furniture manufacture

Authors:

Mladen Figurić

Keywords:

Criterion for Objective Determination of Threshold Value in Filtering Surface Roughness Signal of Solid Wood After Machining with Fast Fourier Transform (FFT) Based Filter

Effects of CNC Processing Parameters on Surface Quality of Wood-Based Panels Used in Furniture Industry

Analysis of Circular Saw Tooth Marks Profile on Material Machined Surface After Filtering with Fast Fourier Transform (FFT)

Comparison of Surface Quality and Tool-Life of Glulam Window Elements after Planing

Experimental Examination and Modification of Chip Suction System in Circular Sawing Machine

Log Splitter Design and Construction

An Innovative Approach to the Forecasting of Energetic Effects While Wood Sawing

A Method and Device for 3D Recognition of Cutting Edge Micro Geometry

CE Marking of Structural Timber: the European Standardization Framework and its Effects on Italian Manufacturers

Application of Neural Network in Simple Tool Wear Monitoring and Indentification System in MDF Milling

Veneer Densification as a Tool for Shortening of Plywood Pressing Time

Effect of Thermal Modification of Oak Wood on Sawdust Granularity

Effect of Feed Speed and Wood Species on Roughness of Machined Surface

Utilization of contribution margin in the costing system in production of components for wood working machines

Influence of saw blade clearance over the workpiece on tool-wear

Project of instrumentation of cyclic multiple-spindle driller aimed at improving its machining efficiency

Granulometric analysis and separation options of dry sawdust exhausted from narrow-kerf frame sawing machines

The combined machine’s short work breaks as quality indicators of air conveyors work

Research of noise levels emitted by two-spindle moulders

Edge bending small machines

Producing veneer of oak (quercus robur erch) by pyramidal cutting

Research work of standard times of operations on a log band sawing machine

Optimization of operation mode on wood working machines with a constant main cutting speed

Queueing theory and simulations in optimization of volume of maintainance service in industry

Fine planing, one of operation of surface treatment

Preparation of tools as one of factors for quality gluing of timber

Production of woodworking machines in the SR of Croatia

Net planning technique application in term determination and control with the calculation on electronic computing machine

Tool maintenance in woodworking industry

Standard operation time system on some machines for furniture manufacture

Publisher