Open Access Journal

Manuscript submission

Archive

Search results for: keyword or title 'urea-formaldehyde'

Volume 75 (2024), Issue 2

The Effect of Type of Reinforcement, Type of Glue and Reinforcement Place on Mechanical and Physical Properties of LVL

Authors:
İlkay Atar, Fatih Mengeloğlu
Keywords:
reinforced LVL; glass fiber; basalt; epoxy; phenol formaldehyde

Volume 75 (2024), Issue 3

Evaluation of Some Physico-Mechanical Properties and Formaldehyde Emission of Ecological Chipboards Produced from Annual Residue Plant Stems

Authors:
Celal Uğur, İbrahim Bektaş
Keywords:
annual residue plants; physico-mechanical properties; formaldehyde emission; ecological chipboards

Volume 74 (2023), Issue 2

Potential Use of Olive Stone Residues in Particleboard Production

Authors:
Gökay Nemli, Uğur Aras, Hulya Kalaycioglu, Suleyman Kustas
Keywords:
olive stone residues; particleboard; physical and mechanical properties; formaldehyde emissions

Volume 74 (2023), Issue 3

Optimization of Production Parameters of Densified Laminated Veneer Lumber Produced by Using Urea-Formaldehyde Resin

Authors:
Saadettin Murat Onat, Serkan Özdemir
Keywords:
densification; laminated veneer lumber; urea formaldehyde; processing parameters; Taguchi method based grey relational analysis

Volume 73 (2022), Issue 2

Characterization of Formaldehyde Emission and Combustion Properties of Peanut (Arachis Hypogaea) Husk-Based Green Composite Panels for Building Applications

Authors:
Ersin Ercan, Musa Atar, Mustafa Kucuktuvek, Hakan Keskin
Keywords:
particleboard, peanut husk, combustion properties, formaldehyde emission, green building materials

Volume 73 (2022), Issue 4

Effects of Silane Treatment on Physical and Mechanical Properties of Particleboards Prepared with Urea Formaldehyde

Authors:
Saadettin Murat Onat, Orhan Kelleci
Keywords:
silane; particleboard; physical and mechanical properties

Volume 73 (2022), Issue 4

Optimization for Green Path in Wood Extractives by Taguchi Analysis

Authors:
Ayben Kilic Pekgözlü, Esra Ceylan, Ayhan Gençer, Rıfat Kurt
Keywords:
deep eutectic solvent; Pinus pinaster; resin acids; choline chloride; ethylene glycol; urea; Taguchi analysis

Volume 72 (2021), Issue 3

Effect of Using Urea Formaldehyde Modified with Extracts in Plywood on Formaldehyde Emission

Authors:
Ugur Bilgin, Gursel Colakoglu
Keywords:
formaldehyde emission; plywood; elm bark; hazelnut husk; tannin; urea formaldehyde

Volume 72 (2021), Issue 3

Possibility of Use of NCC Reinforced Melamine-Urea-Formaldehyde Adhesive in Plywood Manufacturing

Authors:
Jakub Kawalerczyk, Dorota Dziurka, Radosław Mirski, Joanna Siuda, Marta Babicka
Keywords:
plywood; melamine-urea-formaldehyde adhesive; nanocellulose; filler

Volume 71 (2020), Issue 4

Mechanical Properties and Free Formaldehyde Content of Particleboards Produced using Ammonium Sulphate-Based Hardener Partially Replaced with Tartaric Acid

Authors:
Nikola Španić, Vladimir Jambreković, Goran Mihulja, Željko Milanović
Keywords:
particleboards; hardener; tartaric acid; mechanical properties; free formaldehyde content

Volume 71 (2020), Issue 3

Adhesivity of Bio-Based Anhydrous Citric Acid, Tannin-Citric Acid and Ricinoleic Acid in the Properties of Formaldehyde-Free Medium Density Particleboard (MDP)

Authors:
Divino Eterno Teixeira, Danielle do Carmo Pereira, Ana Paula Diniz Nakamura, Sarah Silva Brum
Keywords:
Eucalyptus grandis; bio-based adhesives; particleboards; bonding capacity; FTIR analysis; EN requirements

Volume 71 (2020), Issue 1

Synthesis of Bio-Oilphenol-Formaldehyde Resins under Alkali Conditions: Physical, Chemical and Thermal Properties of Resins and Bonding Performance

Authors:
Günay Özbay, Caglar Cekic, Muhammad Syarhabil Ahmad, Erkan Sami Kokten
Keywords:
bio-phenol; bonding performance; phenol formaldehyde resin; shear strength

Volume 71 (2020), Issue 1

Experimental Study on Combustion Properties and Thermo-Gravimetric Analyses of Oriented Strand Board (OSB)

Authors:
Fatih Yapici
Keywords:
oriented strand board; combustion; thermo-gravimetric analysis; phenol-formaldehyde

Volume 71 (2020), Issue 1

Properties of Plywood Produced with Urea-Formaldehyde Adhesive Modified with Nanocellulose and Microcellulose

Authors:
Jakub Kawalerczyk, Dorota Dziurka, Radosław Mirski, Kinga Szentner
Keywords:
nanocellulose; microcellulose; urea-formaldehyde resin; plywood; modification

Volume 69 (2018), Issue 3

Supplementation of Natural Tannins as an Alternative to Formaldehyde in Urea and Melamine Formaldehyde Resins used in MDF Production

Authors:
Sima Sepahvand, Kazem Doosthosseini, Hamidreza Pirayesh, Behrooz Karamdoost Maryan
Keywords:
Tannin; MF; UF; Formaldehyde emission; MDF

Volume 69 (2018), Issue 3

The Impact of Nanoparticles and Moisture Content on Bonding Strength of Urea Formaldehyde Resin Adhesive

Authors:
Timuçin Bardak, Eser Sozen, Kadir Kayahan, Selahattin Bardak
Keywords:
nanoparticles; urea formaldehyde; moisture content; lap joint shear strength; bonding strength

Volume 69 (2018), Issue 2

Mechanical Properties and Formaldehyde Release of Boards Manufactured with Hygrothermally Treated Tepa (Laureliopsis Philippiana Looser) Particles

Authors:
Rommel Crespo Gutiérrez, Luis Valenzuela, Hernán Wilson
Keywords:
Particleboard; hygrothermal treatment; Laureliopsis philippiana; urea-formaldehyde; particle geometry; mechanical properties; formaldehyde release Hrčak ID: 202891

Volume 69 (2018), Issue 2

Formaldehyde Release from Plywood Manufactured with Two Types of Urea Formaldehyde Resins after Fire Retardant Treatment of Veneers

Authors:
Aydin Demir, Ismail Aydin, Hasan Ozturk
Keywords:
formaldehyde release; plywood; veneer; fire retardant; urea formaldehyde

Volume 68 (2017), Issue 2

Measuring the Formaldehyde Content from Different Types of Oriented Strand Board Manufactured with Different Thicknesses and Glued with Different Resins

Authors:
Mohamed Z. M. Salem, Martin Böhm, Ramadan Nasser
Keywords:
construction panels; formaldehyde content; green products; OSB

Volume 66 (2015), Issue 3

Influence of Adhesive Type on the Properties of LVL Made from Paricá (Schizolobium amazonicum Huber ex. Ducke) Plantation Trees

Authors:
Rafael Rodolfo de Melo, Cláudio Henrique Soares Del Menezzi
Keywords:
Wood products; Lumber; Adhesive; Polyvinyl Acetate Crosslinking; Polyurethane; Phenol-Formaldehyde

Volume 65 (2014), Issue 4

Properties of Modified Phenol-Formaldehyde Adhesive for Plywood Panels Manufactured from High Moisture Content Veneer

Authors:
Pavlo Bekhta, Galyna Ortynska, Jan Sedliacik
Keywords:
gluing; veneer; high moisture content; plywood; phenol-formaldehyde resin; modifying agents

Volume 64 (2013), Issue 3

Influence of the Addition of Urea-Formaldehyde Adhesive to Liquefied Wood on Curing

Authors:
Aleš Ugovšek, Milan Šernek
Keywords:
liquefied wood; urea-formaldehyde adhesive; differential scanning calorimetry; rheometry; shear strength

Volume 64 (2013), Issue 2

Evaluation of Mechanical Properties and Formaldehyde Emission of Plywood Manufactured for Construction Applications

Authors:
Mohamed Z. M. Salem, Martin Böhm, Jaromír Srba
Keywords:
mechanical properties; formaldehyde emission; beech plywood; European small-scale chamber; gas analysis

Volume 62 (2011), Issue 1

Optimization of a Pressing Diagram in OSB Pressing

Authors:
Jaroslav Hrázský, Pavel Král
Keywords:
OSB; pressing; technical properties; isocyanate glue (PMDI); urea-formaldehyd glue (UF)

Volume 62 (2011), Issue 1

Impact of Resin Content on Swelling Pressure of Three Layer Perticleboard Bonded with Urea-Formaldehyde Adhesive

Authors:
Sergej Medved, Alan Antonović, Vladimir Jambreković
Keywords:
particleboards; resin content; swelling; swelling pressure

Volume 62 (2011), Issue 3

Formaldehyde Emission from Wood-Based Panels Bonded with Different Formaldehyde-Based Resins

Authors:
Mohamed Z. M. Salem, Martin Böhm, Štefan Barcík, Jitka Beránková
Keywords:
formaldehyde emission; formaldehyde-based resins; wood-based panels; chamber method; gas analysis method

Volume 61 (2010), Issue 1

Influence of Urea-Formaldehyde Resin Modification with Liquefied Wood on Particleboard Properties

Authors:
Alan Antonović, Vladimir Jambreković, Jaroslav Kljak, Nikola Španić, Sergej Medved
Keywords:
liquefied wood (LW); composite materials; urea-formaldehyde (UF) resin modification; liquefied wood-formaldehyde (LWF) resin

Volume 54 (2003), Issue 4

Modification of wood with dimethyloldihydroxyethylenurea

Authors:
Miro Tomažič, Borut Kričej, Matjaž Pavlič, Marko Petrič
Keywords:
dimethyloldihydroxyethylenurea DMDHEU; modified wood; properties

Volume 53 (2002), Issue 1

Influence of carbon fibers on some relevant properties of veneer plywood

Authors:
Mladen Brezović, Vladimir Jambreković, Jaroslav Kljak
Keywords:
veneer plywood; carbon fibres; mechanical properties; resorcine phenol formaldehyde adhesive

Volume 51 (2000), Issue 1

Influence of veneer moisture content on shear strength of plywood adhesive bond

Authors:
Jože Resnik, Milan Šernek
Keywords:
peeled beech veneer; melamine-urea-formaldehyde adhesive; hot gluing; gluebond shear strength

Volume 49 (1998), Issue 1

Correlation between physical properties of V 20 particle boards made with different kinds and quantities of hydrophobic additives

Authors:
Vladimir Jambreković, Mladen Brezović, Vladimir Bruči
Keywords:
swelling; water adsorption; density; paraffin emulsion; V 20 type particle boards; carbamide-formaldehyde resins

Volume 47 (1996), Issue 4

Influence of interaction of urea-formaldehyde resin and paraffin emulsion on the quality of particle boards

Authors:
Vladimir Jambreković
Keywords:
particle boards; urea-formaldehyde (UF) resin; F: U mol ratio; paraffin emulsion; physical properties; mechanical properties; formaldehyde quantity

Volume 44 (1993), Issue 3

Determination of the quantity of the formaldehyde release of plywood by different methods

Authors:
Božidar Lapaine, Vladimir Jambreković
Keywords:

Volume 43 (1992), Issue 3

Relation between emission formaldehyd value from MDF-boards determinated by perforation and diffusion method

Authors:
Đurđica Trninić, Vladimir Jambreković, Damir Žuntar
Keywords:
MDF-boards E 1 class; free formaldehyde emission; perforator and WKI-24 method

Volume 41 (1990), Issue 5-6

Application of lignosulfonates combined with various urea-formaldehyde resins

Authors:
L. Suša, D. Budin, F. Hvala
Keywords:
lignosulfonates; urea-formaldehyde resins; adhesives; particle boards; mechanical properties

Volume 40 (1989), Issue 1-2

Technological properties of urea bonded resins important for particleboard production

Authors:
Vladimir Bruči, Marina Tatalović
Keywords:
application of glue by spraying method; size of glue drops; glue consumption; glue application

Volume 40 (1989), Issue 9-10

Formaldehyde liberation during the manufacture and storage of composition materials

Authors:
Jadranko Jahić, Vladimir Bruči
Keywords:
free formaldehyde; reduced formaldehyde emission; formaldehyde source interaction

Volume 39 (1988), Issue 9-10

The comparison of shear strength of glued joint made by urea-formaldehyde and some mineral adhesives

Authors:
Milanka Điporović, Jovan Miljković
Keywords:

Volume 39 (1988), Issue 3-4

Cognitions on determination of air contamination degree by formaldehyde

Authors:
Salah-Eldien Omer
Keywords:
position of regulations linked to formaldehyde; The Hoetjer's equation; chamber for determination of formaldehyde emission

Volume 38 (1987), Issue 5-6

Product improvement with regards to the amount of formaldehyde subsequently emitted

Authors:
Vladimir Bruči, Mladen Komac, Marina Tatalović, Jadranko Jahić
Keywords:
formaldehyde emission; formaldehyde concentration; molar ration

Volume 37 (1986), Issue 3-4

Some possibilities of manufacturing fireproof plywood

Authors:
Stjepan Petrović, Josip Klekar
Keywords:
fireproof plywood; structural protection; phenol-formaldehyde glue

Volume 37 (1986), Issue 5-6

Emission of formaldehyde from unimproved and improved particle boards

Authors:
Mladen Komac, Marina Tatalović, Vladimir Bruči
Keywords:
free formaldehyde; emission classes; perforation method; diffusion method

Volume 37 (1986), Issue 11-12

Emission dynamics of formaldehyde from chipboard determined by perforation and diffusion method

Authors:
Vladimir Bruči, Vladimir Sertić, Ivo Opačić
Keywords:
emission dynamics of formaldehyde; perforation method; diffusion method

Volume 36 (1985), Issue 11-12

Research into the possibility of the production of glue-laminated electro-conducting poles

Authors:
Stjepan Petrović, Slavko Kovačević, Salah-Eldien Omer, Ilija Stjepčević
Keywords:
glue laminated wooden poles; resorcin-phenol-formaldehyde glue

Volume 34 (1983), Issue 11-12

Free formaldehyd in production of wood based panel products

Authors:
Salah-Eldien Omer
Keywords:
free formaldehyde; method for determining the liberated formaldehyde; technical method for reduced emission of formaldehyde

Volume 33 (1982), Issue 5-6

Formaldehyde emission from particleboards as a problem of air contamination

Authors:
Jože Lenič, Vesna Tišler
Keywords:
formaldehyde released from particleboard; concentration of formaldehyde

Publisher

Faculty of Forestry and Wood Technology
HRCAK
ORCID
DOI
CROSSREF

DRVNA INDUSTRIJA Scientific Journal of Wood Technology

ISSN 0012-6772 (Print) / ISSN 1847-1153 (Online)

Faculty of Forestry and Wood Technology University of Zagreb, Svetošimunska 25, 10000 Zagreb, Hrvatska - Croatia
Tel: +3851 2352 430, E-mail: drind@sumfak.hr
Editor-in-Chief: Prof. Ružica Beljo-Lučić, Ph.D. E-mail: editordi@sumfak.hr
Cookie settings