Archive

Volume 75 (2024), Issue 3

Volume 74 (2023), Issue 3

Criterion for Objective Determination of Threshold Value in Filtering Surface Roughness Signal of Solid Wood After Machining with Fast Fourier Transform (FFT) Based Filter

Authors:

Igor Đukić, Juraj Jovanović, Ivica Župčić, Matija Jug

Keywords:

machined surface roughness; anatomical roughness; circular saw; solid wood; signal analysis; threshold; FFT

Volume 74 (2023), Issue 1

Structural and Design Values of Solid Timber Beams and Glued Laminated Timber Beams of Dipteryx panamensis and Hieronyma alchorneoides Wood from Fast-Growth Plantation

Authors:

Róger Moya, Carolina Tenorio, Angel Navarro-Mora, Freddy Munoz

Keywords:

tropical species; bending; shear; mezzanine; glulam; mass timber

Volume 74 (2023), Issue 1

Utilization of Lignin Monomer Isolation from Black Liquor of Empty Palm Oil Bunches as a Prebiotic

Authors:

Sri Hidayati, Subeki Subeki, M. Perdiansyah Mulia Harahap, Sutopo Hadi

Keywords:

black liquor; lignin monomer; empty palm oil bunch; prebiotic

Volume 74 (2023), Issue 1

Utilization of Scots Pine (Pinus sylvestris L.) Timber with Defects in Production of Engineered Wood Products

Authors:

Daniel Koynov, Miglena Valyova, Emiliyan Parzhov, Lee Seng Hua

Keywords:

Pinus sylvestris L.; engineered wood; knots; cross-laminated timber (CLT); solid wood panels

Volume 74 (2023), Issue 2

Analysis of Key Attributes of Wooden Toys via an Interval-Valued Spherical Fuzzy Analytic Hierarchy Process

Authors:

Hilal Singer, Şükrü Özşahin

Keywords:

hierarchy process; expert perspective; fuzzy logic; multicriteria decision-making; wooden toy

Volume 73 (2022), Issue 1

Analysis of Operational Efficiency of Wooden Chair Manufacturing Companies in Serbia using DEA

Authors:

Aleksandra Lazarević, Branko Glavonjić, Leon Oblak, Miljan Kalem, Dragan Čomić

Keywords:

value chain; chair; suppliers; DEA; efficiency; operation; enterprises

Volume 71 (2020), Issue 4

Influence of Fibre Length on Properties of Glass-Fibre Reinforced Bark Particleboards

Authors:

Zoltan Pásztory, Zoltan Börcsök, Dimitrios Tsalagkas

Keywords:

utilization of bark; bio-based insulation panel; poplar bark

Volume 68 (2017), Issue 3

Italian Standard UNI 9151– a New Approach to the Design of Industrial Wood Packaging

Authors:

Mauro Andreolli, Domenico Corradetti, Corrado Cremonini, Francesco Negro, Maurizio Piazza, Roberto Zanuttini

Keywords:

allowable stress design; characteristic values; packaging design; state limit design; UNI 9151; UNI 10858

Volume 68 (2017), Issue 1

A Mid-Recession and Post-Recession Comparison of Chain-of-Custody Certification in the U.S. Value-Added Wood Product Manufacturing Sector

Authors:

Richard Vlosky, Cagatay Tasdemir, Rado Gazo, Daniel Cassens

Keywords:

chain-of-custody certification; value-added wood products; United States

Volume 67 (2016), Issue 4

Wood Waste Turned Into Value Added Products: Thermal Plasticization by Benzylation Process

Authors:

Birol Üner, Gökhan Köse, Yeşim Yürümez, Ömer Ümit Yalçın, Mehmet Akgül

Keywords:

thermoplastic resin; hydrogen bond energy; crystallinity; thermal properties

Volume 67 (2016), Issue 4

Functionality and Aesthetics of Furniture - Numerical Expression of Subjective Value

Authors:

Mária Réka Antal, Danijela Domljan, Péter György Horváth

Keywords:

functionality; aesthetic functions; furniture; designers’ methods; customer demands; proportion

Volume 67 (2016), Issue 3

Calorific Value and Chemical Properties in Juvenile and Mature Wood of Thermally-Modified Eucalyptus Grandis

Authors:

Fred Willians Calonego, Elias Taylor Durgante Severo, Cláudio Angeli Sansígolo, Marcos Antonio de Rezende, Edson Marcelo Bruder, Vladimir Eliodoro Costa

Keywords:

biomass; energy; chemical properties; Eucalypts; thermally-modified wood

Volume 67 (2016), Issue 2

Utilization of Common Hazelnut (Corylus avellana L.) Prunings for Pulp Production

Authors:

Ayhan Gençer, Ayhan Özgül

Keywords:

common hazelnut wood; Kraft pulp production; paper; wood pruning

Volume 66 (2015), Issue 3

Characteristics and Geographical Distribution of Fiddleback Figure in Wood of Acer pseudoplatanus L. in Slovenia

Authors:

Luka Krajnc, Katarina Čufar, Robert Brus

Keywords:

fiddleback figure; wavy grain; sycamore maple (Acer pseudoplatanus); commercial value; origin; Slovenia

Volume 66 (2015), Issue 2

Comparison of Natural Frequencies Values of Circular Saw Blade Determined by Different Methods

Authors:

Ján Svoreň, Ľubomír Javorek, Adam Droba, Dušan Paulíny

Keywords:

circular saw blade; critical rotational speed; natural frequencies; finite element method

Volume 65 (2014), Issue 3

Differences in Values of Volume of Unedged Sawn Boards as a Result of Different Width Measurement Methods

Authors:

Andreja Čunčić Zorić, Zlatko Budrović, Kristijan Radmanović, Ivan Turkalj, Miroslav Zaborski, Marko Akmačić

Keywords:

unedged sawn boards; measuring of boards; board width; volume of sawn boards

Volume 62 (2011), Issue 1

Influence of Initial Wood Quality and Drying Process on Utilization Grades of Sawn Spruce Timber

Authors:

Aleš Straže, Željko Gorišek

Keywords:

wood; drying; drying quality; grading

Volume 61 (2010), Issue 1

Energy Characteristics of Wood-Chips Produced from Salix Viminalis - Clone ULV

Authors:

Ladislav Dzurenda, Jarmila Geffertova, Vladimir Hecl

Keywords:

higher heating value; lower heating value; salix wood and bark; wood chips; energy plantations

Volume 60 (2009), Issue 3

Simulation in Wood Industry. Part I

Authors:

Mihály Varga, Etele Csanády, Zoltán Kocsis, Zalán Koppány Kovács

Keywords:

simulation; flow-simulation; utilization; throughput

Volume 60 (2009), Issue 2

Changes in value-added wood product manufacturer perceptions about certification in the United States from 2002 to 2008

Authors:

Richard Vlosky, Rado Gazo, Daniel Cassens, Priyan Perera

Keywords:

certification; United States; wood products; value-added; manufacturers

Volume 60 (2009), Issue 2

Utilization of contribution margin in the costing system in production of components for wood working machines

Authors:

Marek Potkány, Miloš Hitka

Keywords:

calculation; costing; cost; profit; contribution margin

Volume 60 (2009), Issue 4

Estimating the extent of influence of two intrinsic fuelwood properties on acceptance/retention of some woody species in agroforestry practices in southwest Nigeria

Authors:

Andrew Erakhrumen

Keywords:

agroforestry; biomass; biofuel; fuelwood; net calorific value; species selectivity; specific gravity; prioritization; sub-Sahara Africa

Volume 58 (2007), Issue 3

Effect of shear components on stress values in plywood panel subjected to tensile load

Authors:

Jaroslav Kljak, Mladen Brezović

Keywords:

plywood panel; tensile properties; stress; FEM

Volume 55 (2004), Issue 1

Salary system aplication on example of industrial wood processing

Authors:

Jozo Bogdanović

Keywords:

salary; point value; stimulation; work assessment; production quantity; enveloping exploitation of logs

Volume 52 (2001), Issue 4

Influence of air space thickness on thermal transmittance of wooden window

Authors:

Štefo Šorn

Keywords:

insulating glass; k-value; thermal transmittance; wood window; thermal insulation

Volume 49 (1998), Issue 4

Documentation information value in the business system

Authors:

Jože Kropivšek, Denis Jelačić

Keywords:

documentation; documentation information value; archive organization; decision making

Volume 49 (1998), Issue 1

Comparison of the yield for three methods of fir/spruce logs sawing

Authors:

Jurica Butković

Keywords:

value yield; radial sawn timber; tangential sawn timber

Volume 47 (1996), Issue 3

lnvestigation into the changes of wood surface layer by measurement of pH-value

Authors:

Boris Ljuljka, Vladimir Sertić, Ivica Grbac, Vlatka Jirouš-Rajković

Keywords:

wood surface; surface pH; surface activation

Volume 47 (1996), Issue 1

Utilization of the transportation devices in kiln dryers

Authors:

Ankica Kos Pervan, Stjepan Pervan

Keywords:

Kiln dryers; transport devices; woodworking production

Volume 44 (1993), Issue 2

Physical and mechanical properties of extruded and laminated extruded particleboards

Authors:

Vladimir Bruči

Keywords:

extruded particleboards; laminated extruded particleboards; physical and mechanical properties; perforation value; thickness; density; water absorption; swelling

Volume 43 (1992), Issue 3

Relation between emission formaldehyd value from MDF-boards determinated by perforation and diffusion method

Authors:

Đurđica Trninić, Vladimir Jambreković, Damir Žuntar

Keywords:

MDF-boards E 1 class; free formaldehyde emission; perforator and WKI-24 method

Volume 40 (1989), Issue 11-12

Present situation in primary conversion and finalization and problems of further development of timber conversion in »Bilokalnik« Koprivnica

Authors:

Nevenko Petruša

Keywords:

utilization of sawn timber; secondary conversion; sale of workpieces manufactured in the mill

Volume 39 (1988), Issue 5-6

Chemical and anatomical properties and possibility of firwood sawmill residue utilization for high-yield chemimechanical pulps production

Authors:

Tatjana Stevanović Janežić, Biljana Bujanović

Keywords:

firwood sawmill residue; Abies pectinata; chemical composition; anatomical properties; softwood chips; high-yield pulps; chemimechanical pulping; chemithermomechanical pulping; softwood sulfonation; quuinomethide; sulphonated lignin; better qualities CMP/CTMP

Volume 39 (1988), Issue 3-4

Forestry and timber industry in Yugoslavia in 1987

Authors:

Dušan Oreščanin

Keywords:

exports and imports of timber; products of forest utilization; primary processing of wood; veneers and wood-based panels; finished wood products

Volume 38 (1987), Issue 9-10

Development of timber conversion and utilization of Slavonian oak and other hardwood species in Croatia from 1699 to 1984

Authors:

Marko Gregić

Keywords:

forest exploitation; sawmilling and chemical processing of wood; woodworking; development of timber industry in Croatia

Volume 37 (1986), Issue 1-2

Rationalization of forest biomass utilization in Czechoslovakia

Authors:

Jindrich Frais

Keywords:

Volume 37 (1986), Issue 9-10

Integral utilization of raw material

Authors:

Vladimir Sertić

Keywords:

chemical conversion of wood; pulp and paper; thermal conversion; hydrolysis of carbohydrates; lignin; extractives

Volume 35 (1984), Issue 9-10

Energy production from wood residue, based on recent achievement of energetics

Authors:

Miroslav Markeš

Keywords:

wood residue; energy production; increased utilization; cogeneration

Volume 34 (1983), Issue 4

Conversion of decidious species by combination of mechanical and chemical processing, particulary from aspect of solving the problem of wood waste

Authors:

Mile Orešković

Keywords:

chemical wood processing and sawmilling; wood waste; wood briquettes from sawdust and baric; integral utilization of wood

Volume 34 (1983), Issue 4

Beechwood and its utilization in production of railway sleepers

Authors:

Nada Uidl

Keywords:

beech railway sleepers; staining

Volume 34 (1983), Issue 7-8

Optimal utilization of volume of wood in kombinat "Belišće"

Authors:

Vjekoslav Međurečan

Keywords:

quantitative degree of utilization; value utilization degree; quantitative; value utilization degree; labour productivity; optimal degree of utilization

Volume 34 (1983), Issue 7-8

Research of quantitative and qualitative utilization of thin beech round logs

Authors:

Ramiz Zubčević

Keywords:

thin beech logs; quantitative utilization; quantitative structure of assortments

Volume 34 (1983), Issue 7-8

Effect of axial form and distribution of qualitative zones of unstandard beech round logs on technology and utilization

Authors:

Borislav Šoškić

Keywords:

quantitative utilization of unstandard beech logs; technology of thin round logs conversion

Volume 33 (1982), Issue 3-4

Qualitative comparison of different arrangement of saw blades in regard to utilization of logs on the frame-saws

Authors:

Vladimir Hitrec

Keywords:

simulation of sawing on the frame saw; volume utilization of logs; influential factors of utilization

Volume 32 (1981), Issue 1-2

Determination of the workmanship cycles in furniture production

Authors:

Stjepan Tkalec

Keywords:

production cycle; workmanship cycle; discontinued and continued workmanship process; coefficient of flow; interval estimate of waiting the mean value; regressive analysis; constructive and technological complexlty of production

Volume 32 (1981), Issue 1-2

Determination of arrangement of saw blades by a method of simulated sawing of logs on the frame saws

Authors:

Vladimir Hitrec

Keywords:

optimization of sawing; simulation of sawing; volume utilization; value utilization

Volume 31 (1980), Issue 3-4

Contribution to investigation of humidity influence when testing particleboard properties

Authors:

Vilko Rajman

Keywords:

particleboards; influence of samples moisture content at the moment of testing; relation of moisture content and absolute value of the tested property

Volume 31 (1980), Issue 5-6

Influence of sawing technology on utilization of firwood logs

Authors:

Đorđe Butković

Keywords:

firwood utilization; experimental sawing; simulating sawing

Volume 30 (1979), Issue 3

Some possibilities of bark and wood wastes conversion briquetting

Authors:

Stjepan Petrović

Keywords:

wood wastes; bark and wastes briquetting; wooden briquettes thermal value

Volume 30 (1979), Issue 4

Maximum yield from the side zones of the sawlog

Authors:

Mojsije Vučeljić

Keywords:

log conversion with the gang saw; utilization of the log side zones; setting of sawblades in the gang saw

Volume 30 (1979), Issue 7-8

Contribution to investigation of voluminal and qualitative utilization of oak veneer logs dependent on thickness grade and provenience

Authors:

Ilija Stjepčević

Keywords:

voluminal and qualitative utilization of veneer logs; production of cut veneer; thickness grade and provenience of logs

Volume 30 (1979), Issue 7-8

Investigations of quantitative and qualitative utilization in sawing firwood sprucewood logs

Authors:

Ramiz Zubčević

Keywords:

sawn conifiers; quantitative and qualitative utilization

Volume 30 (1979), Issue 9-10

Some possibilities of industrial processing of bark and waste - Production of thermal energy

Authors:

Stjepan Petrović

Keywords:

bark and waste burning; caloric value of waste

Volume 29 (1978), Issue 5-6

Utilization of low quality beech logs sawn on band saw by two different methods

Authors:

Marko Gregić

Keywords:

conversion of Iow quality beech Iogs; »radial« and »tangential« sawing on band saws; quantity, quality and value yield

Volume 29 (1978), Issue 5-6

Kora - otpadak ili gorivo?

Authors:

Zvonimir Preveden

Keywords:

bark; calorific value; combustion diagrams; environmental protection

Volume 28 (1977), Issue 9-10

Rationalization of veneer consumption in furniture manufacture

Authors:

Rudolf Truc

Keywords:

veneer utilization in furniture manufacture; veneer preparation; veneer splicing

Volume 27 (1976), Issue 11-12

Some aspects of power consumption influence on business activity of woodworking enterprises

Authors:

Franjo Halusek

Keywords:

planning and rational power utilization; tariff rate choice

Volume 26 (1975), Issue 11-12

Utilization of sawmill capacities in S.R. Croatia

Authors:

Ivica Milinović

Keywords:

Analysis of Primary Value Chains in Slovenian Forest and Wood Bioeconomy

Criterion for Objective Determination of Threshold Value in Filtering Surface Roughness Signal of Solid Wood After Machining with Fast Fourier Transform (FFT) Based Filter

Structural and Design Values of Solid Timber Beams and Glued Laminated Timber Beams of Dipteryx panamensis and Hieronyma alchorneoides Wood from Fast-Growth Plantation

Utilization of Lignin Monomer Isolation from Black Liquor of Empty Palm Oil Bunches as a Prebiotic

Utilization of Scots Pine (Pinus sylvestris L.) Timber with Defects in Production of Engineered Wood Products

Analysis of Key Attributes of Wooden Toys via an Interval-Valued Spherical Fuzzy Analytic Hierarchy Process

Analysis of Operational Efficiency of Wooden Chair Manufacturing Companies in Serbia using DEA

Influence of Fibre Length on Properties of Glass-Fibre Reinforced Bark Particleboards

Italian Standard UNI 9151– a New Approach to the Design of Industrial Wood Packaging

A Mid-Recession and Post-Recession Comparison of Chain-of-Custody Certification in the U.S. Value-Added Wood Product Manufacturing Sector

Wood Waste Turned Into Value Added Products: Thermal Plasticization by Benzylation Process

Functionality and Aesthetics of Furniture - Numerical Expression of Subjective Value

Calorific Value and Chemical Properties in Juvenile and Mature Wood of Thermally-Modified Eucalyptus Grandis

Utilization of Common Hazelnut (Corylus avellana L.) Prunings for Pulp Production

Characteristics and Geographical Distribution of Fiddleback Figure in Wood of Acer pseudoplatanus L. in Slovenia

Comparison of Natural Frequencies Values of Circular Saw Blade Determined by Different Methods

Differences in Values of Volume of Unedged Sawn Boards as a Result of Different Width Measurement Methods

Influence of Initial Wood Quality and Drying Process on Utilization Grades of Sawn Spruce Timber

Energy Characteristics of Wood-Chips Produced from Salix Viminalis - Clone ULV

Simulation in Wood Industry. Part I

Changes in value-added wood product manufacturer perceptions about certification in the United States from 2002 to 2008

Utilization of contribution margin in the costing system in production of components for wood working machines

Estimating the extent of influence of two intrinsic fuelwood properties on acceptance/retention of some woody species in agroforestry practices in southwest Nigeria

Effect of shear components on stress values in plywood panel subjected to tensile load

Salary system aplication on example of industrial wood processing

Influence of air space thickness on thermal transmittance of wooden window

Documentation information value in the business system

Comparison of the yield for three methods of fir/spruce logs sawing

lnvestigation into the changes of wood surface layer by measurement of pH-value

Utilization of the transportation devices in kiln dryers

Physical and mechanical properties of extruded and laminated extruded particleboards

Relation between emission formaldehyd value from MDF-boards determinated by perforation and diffusion method

Present situation in primary conversion and finalization and problems of further development of timber conversion in »Bilokalnik« Koprivnica

Chemical and anatomical properties and possibility of firwood sawmill residue utilization for high-yield chemimechanical pulps production

Forestry and timber industry in Yugoslavia in 1987

Development of timber conversion and utilization of Slavonian oak and other hardwood species in Croatia from 1699 to 1984

Rationalization of forest biomass utilization in Czechoslovakia

Integral utilization of raw material

Energy production from wood residue, based on recent achievement of energetics

Conversion of decidious species by combination of mechanical and chemical processing, particulary from aspect of solving the problem of wood waste

Beechwood and its utilization in production of railway sleepers

Optimal utilization of volume of wood in kombinat "Belišće"

Research of quantitative and qualitative utilization of thin beech round logs

Effect of axial form and distribution of qualitative zones of unstandard beech round logs on technology and utilization

Qualitative comparison of different arrangement of saw blades in regard to utilization of logs on the frame-saws

Determination of the workmanship cycles in furniture production

Determination of arrangement of saw blades by a method of simulated sawing of logs on the frame saws

Contribution to investigation of humidity influence when testing particleboard properties

Influence of sawing technology on utilization of firwood logs

Some possibilities of bark and wood wastes conversion briquetting

Maximum yield from the side zones of the sawlog

Contribution to investigation of voluminal and qualitative utilization of oak veneer logs dependent on thickness grade and provenience

Investigations of quantitative and qualitative utilization in sawing firwood sprucewood logs

Some possibilities of industrial processing of bark and waste - Production of thermal energy

Utilization of low quality beech logs sawn on band saw by two different methods

Kora - otpadak ili gorivo?

Rationalization of veneer consumption in furniture manufacture

Some aspects of power consumption influence on business activity of woodworking enterprises

Utilization of sawmill capacities in S.R. Croatia

Publisher