Open Access Journal

Manuscript submission

Archive

Search results for: keyword or title 'volume carrying capacity'

Volume 74 (2023), Issue 1

Shear Force Capacities of H-Type Furniture Joints Constructed of Various Heat-Treated Wood Species

Authors:
Mehmet Acar, Engin Balikci, Tolga Kuskun, Ali Kasal, Ziya Yusuf Erdil
Keywords:
heat-treated wood; H-type joint; mortise and tenon joint; dowel joint; shear force capacity

Volume 72 (2021), Issue 1

Influence of Allowances on Taking Log Deliveries

Authors:
Veronika Hunková, Karel Janák
Keywords:
log; round wood volume; delivery; allowance; loss

Volume 71 (2020), Issue 3

Adhesivity of Bio-Based Anhydrous Citric Acid, Tannin-Citric Acid and Ricinoleic Acid in the Properties of Formaldehyde-Free Medium Density Particleboard (MDP)

Authors:
Divino Eterno Teixeira, Danielle do Carmo Pereira, Ana Paula Diniz Nakamura, Sarah Silva Brum
Keywords:
Eucalyptus grandis; bio-based adhesives; particleboards; bonding capacity; FTIR analysis; EN requirements

Volume 69 (2018), Issue 2

Production and Characterization of Bacterial Cellulose with Different Nutrient Source and Surface–Volume Ratios

Authors:
Gokhan Gunduz, Nejla Aşık
Keywords:
bacterial cellulose; crystallinity; morphology; carrot; production

Volume 66 (2015), Issue 4

Effect of Heat Treatment of Wild Cherry Wood on Abrasion Resistance and Withdrawal Capacity of Screws

Authors:
Ayhan Aytin, Süleyman Korkut, Nusret As, Öner Ünsal, Gokhan Gunduz
Keywords:
Heat treatment; ThermoWood; abrasion resistance; withdrawal capacity of screws; Wild Cherry wood

Volume 66 (2015), Issue 4

Finite Changes of Bound Water Moisture Content in a Given Volume of Beech Wood

Authors:
Richard Hrčka
Keywords:
beech wood; diffusion coefficient; moisture content

Volume 65 (2014), Issue 3

Differences in Values of Volume of Unedged Sawn Boards as a Result of Different Width Measurement Methods

Authors:
Andreja Čunčić Zorić, Zlatko Budrović, Kristijan Radmanović, Ivan Turkalj, Miroslav Zaborski, Marko Akmačić
Keywords:
unedged sawn boards; measuring of boards; board width; volume of sawn boards

Volume 65 (2014), Issue 2

Specific Heat Capacity of Wood

Authors:
Kristijan Radmanović, Igor Đukić, Stjepan Pervan
Keywords:
specific heat capacity; wood; moisture content; temperature

Volume 64 (2013), Issue 3

Effect of Seed Source on Physical Properties of Scots Pine (a Case Study in Neka, Iran)

Authors:
Mohammad Farsi, Majid Kiaei, Shahram Miar, Shirzad Mohammadnezhad Kiasari
Keywords:
seed sources; Scots pine; oven-dry density; basic density; volumetric shrinkage; volumetric swelling

Volume 63 (2012), Issue 4

Bending Capacity of Middle Joints of Upholstered Furniture Frames

Authors:
Vasiliki Kamperidou, Vasileios Vasileiou
Keywords:
bending moment capacity; corner block joint; dowel joint; gusset plate joint; middle joint; mortise and tenon joint; upholstered furniture frame

Volume 60 (2009), Issue 1

Finite volume method for analysis of stress and strain in wood

Authors:
Izet Horman, Dunja Martinović, Seid Hajdarević
Keywords:
finite volume method; chair; wood; drying; steaming

Volume 58 (2007), Issue 3

Differences in round wood measurements using electronic 2D and 3D systems and standard manual method

Authors:
Karel Janák
Keywords:
log yards; round wood; electronic measurement systems; reception; volume calculation

Volume 57 (2006), Issue 4

Influence of molar transfer coefficient on pressure distribution in beech lumber during its convective-vacuum drying

Authors:
Nencho Deliiski, Altay Syuleymanov
Keywords:
vacuum drying; pressure distribution; molar transfer coefficient; specific mass capacity; beech wood

Volume 56 (2005), Issue 4

Differences in volume of round timber caused by different determination methods

Authors:
Karel Janák
Keywords:
round timber; dimension measurement; log volume

Volume 53 (2002), Issue 1

Temperature fields in windows

Authors:
Dunja Martinović, Izet Horman
Keywords:
window; temperature; finite volume method

Volume 48 (1997), Issue 2

MDF - world trend

Authors:
Vladimir Jambreković, Vladimir Bruči
Keywords:
MDF; quality of MDF; use of MDF; consumption of the world; the world production; installation of capacity; export; import

Volume 42 (1991), Issue 1-2

Some physical properties of fir-wood from Gorski kotar

Authors:
Tomislav Sinković
Keywords:
fir-wood; density of oven dry wood; fiber saturation point; volumetric shrinkage; moisture content after felling

Volume 41 (1990), Issue 9-10

Edge bending small machines

Authors:
Stjepan Tkalec
Keywords:
edge banding machine; gluing of edge strips and veneer; capacity and flexibility, technology of edge lining

Volume 41 (1990), Issue 3-4

Variation of fir wood structure from region of Gorski kotar

Authors:
Božidar Petrić, Jelena Trajković, Radovan Despot
Keywords:
fir wood; variation of growth ring widths tracheid dimensions; volume percentages of tracheids and wood rays

Volume 39 (1988), Issue 9-10

Contribution to investigation of time required for performance on a log band saw

Authors:
Ivan Aleksov, Milan Vukićević
Keywords:
log band paw; time of log conversion; correlation; log diameter; number of cuts per log; log volume

Volume 36 (1985), Issue 1-2

Standardization of the "capacity" concept

Authors:
Marijan Brezinšćak
Keywords:
mass carrying capacity; capacity as a force; capacity as moment of force; volume carrying capacity

Volume 35 (1984), Issue 3-4

Queueing theory and simulations in optimization of volume of maintainance service in industry

Authors:
Dalibor Benić
Keywords:
organization of production; maintainance of machines and equipment; appllication of queueing theory; application of simulations; operations research

Volume 35 (1984), Issue 9-10

Finished wood production

Authors:
Radoslav Jeršić
Keywords:
specialization; cooperation; division of labour; extent of production capacity

Volume 34 (1983), Issue 7-8

Optimal utilization of volume of wood in kombinat "Belišće"

Authors:
Vjekoslav Međurečan
Keywords:
quantitative degree of utilization; value utilization degree; quantitative; value utilization degree; labour productivity; optimal degree of utilization

Volume 33 (1982), Issue 9-10

Solid wood cutting-out optimization

Authors:
Željko Pizent
Keywords:
cutting-out optimization; solid wood cutting-out capacity

Volume 33 (1982), Issue 3-4

Qualitative comparison of different arrangement of saw blades in regard to utilization of logs on the frame-saws

Authors:
Vladimir Hitrec
Keywords:
simulation of sawing on the frame saw; volume utilization of logs; influential factors of utilization

Volume 33 (1982), Issue 5-6

Analysis of influence of log taper, log length, saw kerf width and sawing inaccuracy on volume log yield when sawn on frame-saw by method of simulation

Authors:
Vladimir Hitrec
Keywords:
simulations of sawing; frame-saw; volume log yield

Volume 32 (1981), Issue 1-2

Determination of arrangement of saw blades by a method of simulated sawing of logs on the frame saws

Authors:
Vladimir Hitrec
Keywords:
optimization of sawing; simulation of sawing; volume utilization; value utilization

Volume 32 (1981), Issue 1-2

Some observations to sawmilling problems in Yugoslavia

Authors:
Ivica Milinović
Keywords:
reconstruction and modernization of sawmills; supply of logs to the sawmills; optimum capacity of sawmill; winter felling of beech logs

Volume 32 (1981), Issue 11-12

Some structural characteristics of adult homegrown oakwood (quercus robur, l.)

Authors:
Božidar Petrić, Velimir Šćukanec
Keywords:
characteristics of oakwood structural elements; volume participation of structural elements

Volume 31 (1980), Issue 7-8

Gluing time of veneers as function of the temperature change intensity in the joints

Authors:
Murat Backović
Keywords:
time of glue hardening; chemical and physical changes in joints; time of the loss of capacity of glue hardening; temperature flow in the joints; intensity of temperature changes in the joints; coefficient of temperature conductivity

Volume 28 (1977), Issue 3-4

The application of break-even point analysis, rate of contribution analysis and profit-volume analysis in timber industry plant business performance analysis

Authors:
Rudolf Sabadi
Keywords:
break-even analysis; rate of contribution; P-V analysis

Volume 28 (1977), Issue 11-12

Mehanizacija pilana za tvrdo drvo u SFRJ

Authors:
Marko Gregić
Keywords:
hardwood sawmill mechanization; sawmill capacity; classic sawmill technology; technology of wooden elements

Volume 27 (1976), Issue 7-8

About some coefficients determining the relation between two properties - application in woodworking industry

Authors:
Vladimir Hitrec
Keywords:
prognosis; regression analysis; log volume yield; flow of material

Publisher

Faculty of Forestry and Wood Technology
HRCAK
ORCID
DOI
CROSSREF

DRVNA INDUSTRIJA Scientific Journal of Wood Technology

ISSN 0012-6772 (Print) / ISSN 1847-1153 (Online)

Faculty of Forestry and Wood Technology University of Zagreb, Svetošimunska 25, 10000 Zagreb, Hrvatska - Croatia
Tel: +3851 2352 430, E-mail: drind@sumfak.hr
Editor-in-Chief: Prof. Ružica Beljo-Lučić, Ph.D. E-mail: editordi@sumfak.hr
Cookie settings