Archive

Volume 75 (2024), Issue 2

Experimental Investigation of Rotational Behavior of Glulam Column-Beam Connection Reinforced with Carbon, Glass, Basalt and Aramid FRP Fabric

Authors:

Yasemin Şi̇mşek Türker

Keywords:

glulam, column-beam, connection, FRP fabric, reinforced

Volume 74 (2023), Issue 1

The Influence of Different Wood Modifications on Pull-out Force of Rotary Welded Dowels

Authors:

Ivica Župčić, Igor Đukić, Matija Jug, Mario Jurišić, Marin Hasan

Keywords:

rotary welding; thermal modification; modification with citric acid; pull-out force; wooden dowels

Volume 74 (2023), Issue 3

Analysis of the Effect of Gypsum-Based Fire Protection Cover on Charring of Wooden Bearing Elements

Authors:

Marie Rusinová, Miloš Lavický, Miloš Kalousek, Martin Sedlmajer

Keywords:

fire resistance; ignition temperature; gypsum plasterboard; gypsum fibreboard; fire test

Volume 73 (2022), Issue 1

Long-Term Hygroscopic Thickness Swelling Rate of Hydrothermally Treated Beech Wood / Polypropylene Composites

Authors:

Seyyed Khalil Hosseinihashemi, Farhad Arwinfar, Abdollah Najafi, Ferhat Özdemir, Nadir Ayrilmis, Abbas Tamjidi

Keywords:

thickness swelling rate; thermal-treatment; lignocellolusic filler; polypropylene

Volume 73 (2022), Issue 2

Surface Roughness of Sliced Veneers in Terms of Defects and Wood Structure Variability – Impact of Mild Hydrothermal Treatment

Authors:

Vasiliki Kamperidou, Efstratios Aidinidis, Ioannis Barboutis

Keywords:

knot, modification, quality, surface property, texture, veneer

Volume 72 (2021), Issue 2

Dependence of Dowel Joint Strength on Welding Temperature in Rotary Welding

Authors:

Ivica Župčić, Ivan Žulj, Ivica Grbac, Kristijan Radmanović

Keywords:

welding of wood; embedded force; temperature in rotary welding; dowel joints

Volume 71 (2020), Issue 3

Bio-based Methods with Potentials for Application in Wooden Furniture Industry

Authors:

Karin Hrovatin, Jasna Hrovatin

Keywords:

biotechnology; natural products; wood; furniture; wood protection; wood colouring; natural adhesives; wood functionalisation; biomimicry

Volume 71 (2020), Issue 1

Anatomical, Chemical and Mechanical Characteristics of Beech Wood Degraded by Two Pleurotus Species

Authors:

Yaghoob Azimi, Mohsen Bahmani, Ali Jafari, Hamid Reza Riyahi Bakhtyari

Keywords:

Pleurotus cornucopiae; Pleurotus eryngii; Trametes versicolor; wood decay; chemical analysis; light microscopy

Volume 71 (2020), Issue 1

Hygrothermal Treatment of Tepa (Laureliopsis philippiana Looser) Fibers: Effects on Chemical and Physical Properties

Authors:

Rommel Crespo Gutiérrez, Marco Torres Uribe, Hernán Wilson

Keywords:

hygrothermal treatment; Laureliopsis philippiana; fibers; physical and chemical properties; acidity; fiberboards

Volume 70 (2019), Issue 3

Influence of Air Humidity Variation on Strength of Rotary Welded Dowel Joints of Pinewood

Authors:

Ivan Žulj, Ivica Župčić, Ivica Grbac

Keywords:

welding solid wood; Scots pine (Pinus sylvestris L.); dowels; strength of welded joints; weld factors; embedded force; the impact of humidity on wood; wood moisture content

Volume 70 (2019), Issue 2

Thermal Stability of Wood Fibers Produced from Recycled Medium Density Fiberboards

Authors:

Mohammad Ahmadi, Bita Moezzipour, Aida Moezzipour

Keywords:

thermal stability; recycled fibers; MDF; electrical heating; hydrothermal

Volume 69 (2018), Issue 2

Mechanical Properties and Formaldehyde Release of Boards Manufactured with Hygrothermally Treated Tepa (Laureliopsis Philippiana Looser) Particles

Authors:

Rommel Crespo Gutiérrez, Luis Valenzuela, Hernán Wilson

Keywords:

Particleboard; hygrothermal treatment; Laureliopsis philippiana; urea-formaldehyde; particle geometry; mechanical properties; formaldehyde release Hrčak ID: 202891

Volume 69 (2018), Issue 2

Production and Characterization of Bacterial Cellulose with Different Nutrient Source and Surface–Volume Ratios

Authors:

Gokhan Gunduz, Nejla Aşık

Keywords:

bacterial cellulose; crystallinity; morphology; carrot; production

Volume 69 (2018), Issue 2

Sudanese Dicots as Alternative Fiber Sources for Pulp and Papermaking

Authors:

Haroon Saeed, Yu Liu, Lucian Lucia, Honglei Chen

Keywords:

Sudanese annual plants; castor bean; Leptadenia pyrotechnica; pulp and paper

Volume 69 (2018), Issue 2

Microtensile Testing of Wood – Influence of Material Properties, Exposure and Testing Conditions on Analysis of Photodegradation

Authors:

Hrvoje Turkulin, Vjekoslav Živković

Keywords:

softwoods; microtensile testing; thin strips; density; photodegradation

Volume 68 (2017), Issue 3

Influence of Lyophilisation and Oven-Drying on Extraction Yield of Oregonin from European Black Alder (Alnus glutinosa (L.) Gaertn.) Bark

Authors:

Miljenko Klarić, Stjepan Pervan, Martina Biošić

Keywords:

European black alder; bark; oregonin; hydrothermal treatment; lyophilisation (freeze-drying); ovendrying; extraction yield; methanol; deionised water

Volume 68 (2017), Issue 3

Fiber Characteristics of White Poplar (Populus alba L.) Juvenile Wood along the Drava River

Authors:

Iva Ištok, Bogoslav Šefc, Marin Hasan, Gordana Popović, Tomislav Sedlar

Keywords:

Populus alba L.; juvenile wood; fiber characteristics; wood anatomical properties variation

Volume 68 (2017), Issue 4

The Influence of Radial Slots on Dynamic Stability of Thermally Stressed Circular Saw Blade

Authors:

Miran Merhar, Dominika Gornik Bučar

Keywords:

circular saw blade; finite element method; radial slots; critical rotational speed; temperature distribution

Volume 68 (2017), Issue 4

Determination of the Effect of Liquid Glass (SiO2) on Color Stability of Wood Stained by Natural Dyes

Authors:

Mehmet Yeniocak, Osman Goktas, Sezil Aliyazicioglu, Mehmet Colak, Sevil Yeniocak, Ertan Ozen, Mehmet Ugurlu

Keywords:

Liquid glass; (SiO2); natural plant dyes; wood protection; color stability; cold check

Volume 67 (2016), Issue 3

Physical Properties of Boards Manufactured with Hygrothermally Treated Tepa (Laureliopsis Philippiana Looser) Particles

Authors:

Rommel Crespo Gutiérrez, Luis Valenzuela, Hernán Wilson

Keywords:

Particleboard; hygrothermal treatment; Laureliopsis philippiana; physical properties; dimensional stability

Volume 66 (2015), Issue 2

Comparison of Natural Frequencies Values of Circular Saw Blade Determined by Different Methods

Authors:

Ján Svoreň, Ľubomír Javorek, Adam Droba, Dušan Paulíny

Keywords:

circular saw blade; critical rotational speed; natural frequencies; finite element method

Volume 65 (2014), Issue 1

Microtensile Testing of Wood – Overview of Practical Aspects of Methodology

Authors:

Vjekoslav Živković, Hrvoje Turkulin

Keywords:

wood; thin strips; microtensile testing

Volume 63 (2012), Issue 4

Bioremediation of Lindane by Wood-Decaying Fungi

Authors:

Ajda Ulčnik, Irena Kralj Cigić, Lucija Zupančič-Kralj, Črtomir Tavzes, Franc Pohleven

Keywords:

biodegradation; lindane; white rot; adsorption; gas-chromatography

Volume 63 (2012), Issue 4

Possibilities for Thermography Application in Hydrothermal Wood Processing

Authors:

Stjepan Pervan, Mladen Brezović, Silvana Prekrat, Kristina Klarić, Goran Sazdevski

Keywords:

IR thermography; wood thermal properties; hydrothermal processing

Volume 63 (2012), Issue 2

Diagnostics of Circular Sawblade Vibration by Displacement Sensors

Authors:

Přemysl Veselý, Zdeněk Kopecký, Zdeněk Hejmal, Přemysl Pokorný

Keywords:

circular sawblade; critical rotational speed; resonant rotational speed; vibration; Fast Fourier Transform analysis

Volume 62 (2011), Issue 1

Influence of Thermal Modification of Beech on the Strength of Longitudinally Connected Turned Elements by Rotational Welding Method

Authors:

Ivica Župčić, Marko Mijaković, Ivica Grbac

Keywords:

beech; welding of solid and modified wood; strength of welded joints; longitudinal bonding

Volume 59 (2008), Issue 1

Ecological issues of byproducts in hydrothermal wood processing

Authors:

Stjepan Pervan, Goran Draščić, Alan Antonović

Keywords:

hydrothermal wood processing; atmospheric emission; condensate; chemical constituents

Volume 58 (2007), Issue 1

Selected properties of beech wood degraded by brown-rot fungus Coniophora puteana

Authors:

Rastislav Solár, Stanislav Kurjatko, Miroslav Mamon, Božena Košíková, Eva Neuschlová, Eva Výbohová

Keywords:

beech wood; Coniophora puteana; physical properties; VIS and FTIR spectra

Volume 57 (2006), Issue 2

Discolouration of coated cherry wood and maple wood surface in indoor use

Authors:

Vlatka Jirouš-Rajković, Goran Mihulja, Dubravko Horvat

Keywords:

wood colour; interior; discolouration of coated wood; clear coatings; photoprotection of wood and coating

Volume 56 (2005), Issue 3

Identification of critical speeds of clamped circular saws

Authors:

Kazimierz A. Orlowski

Keywords:

circular saw; critical rotational speed; methodology of determination

Volume 53 (2002), Issue 1

Durability of wooden facades Part 1: Physical and structural protection

Authors:

Hrvoje Turkulin, Jürgen Sell

Keywords:

wooden facades; wood protection; design details; wood preservation; wood finishing

Volume 52 (2001), Issue 2

The prospects of wood as a shipbuilding material in Croatia

Authors:

Izvor Grubišić, Radovan Despot, Jelena Trajković, Mladen Balić

Keywords:

shipbuilding wood; wooden ships and boats; building, maintenance and protection of wooden ships

Volume 51 (2000), Issue 4

The dry rot fungus Serpula lacrymans - the major cause of wood decay in buildings

Authors:

Radovan Despot, Jelena Trajković, Bogoslav Šefc

Keywords:

Serpula lacrymans Wulfen: Fr.; Schroeter; dry rat fungi; wood preservatives; preservation methods

Volume 51 (2000), Issue 1

A Yield of American Walnut in Sliced Veneer Production

Authors:

Vladimir Bruči, Aida Kopljar, Vladimir Jambreković

Keywords:

sliced veneer; veneer flitches; hydrothermic treatment; a share of bark; veneer thickness; veneer drying; yield of American walnut

Volume 50 (1999), Issue 2

Croatian wood processing firms and water pollution

Authors:

Leon Oblak, Denis Jelačić, Krešimir Greger

Keywords:

waste waters; purified waste waters; environmental protection; water protection

Volume 48 (1997), Issue 4

An investigation into the protection of wood from UV-radiation and water

Authors:

Vlatka Jirouš-Rajković, Ivica Grbac, Stjepan Tkalec

Keywords:

UV-radiation; photostabilizers; adhesion, chromium trioxide; ferric nitrate

Volume 48 (1997), Issue 2

Production possibilities for structurally protected plywood by chemical fire-retardants

Authors:

Mladen Brezović

Keywords:

structural protection; fire-retardant chemicals; physical and mechanical properties; fire-retardance; fire-tube method

Volume 46 (1995), Issue 2

Research of noise levels emitted by two-spindle moulders

Authors:

Ružica Beljo Lučić, Vlado Goglia

Keywords:

noise; woodworking machinery; noise protection

Volume 46 (1995), Issue 3

Assessment of Wood Photodegradation by Microtensile Testing

Authors:

Hilary Derbyshire, Eric Roy Miller, Jürgen Sell, Hrvoje Turkulin

Keywords:

softwoods; photodegradation; tensile strength; SEM; fractography

Volume 46 (1995), Issue 3

Biotechnical wood protection in timber storage yards of woodworking plants

Authors:

Gorazd Babuder

Keywords:

biotechnical wood protection; scolytid bark beetles; trups; synthetic pheromones; timber storage yards.

Volume 46 (1995), Issue 3

Wood protection and European regulations - part II

Authors:

Radovan Despot, Božidar Petrić, Jelena Trajković

Keywords:

Volume 45 (1994), Issue 3

Contributions to the knowledge of the Adriatic sea wood marine borers

Authors:

Radovan Despot

Keywords:

marine wood borers; Mediterranean and Adriatic sea; chemical protection of wood in the sea

Volume 41 (1990), Issue 11-12

Researches on UV ozonization protection of elements made of wood and other wood components used in interiors

Authors:

Mirko Gornik

Keywords:

ozonization; UV rays; wood protection; bio-corrosion

Volume 41 (1990), Issue 1-2

Performance of finishes on weather exposed wood joinery

Authors:

Vlatka Jirouš-Rajković

Keywords:

finish; wood joinery; weathering; wood protection

Volume 40 (1989), Issue 11-12

Protection of fir wood joinery by double vacuum method

Authors:

Božidar Petrić, Velimir Šćukanec, Radovan Despot, Jelena Trajković

Keywords:

Chemical protection of fir wood; double vacuum method; penetration and apsorption of wood preservative

Volume 39 (1988), Issue 3-4

Production of Locust veneer (Robinia Pseudoacacia L.)

Authors:

Franjo Penzar

Keywords:

Black Locust; hydrothermal preparation; sliced veneer; surface finishing

Volume 38 (1987), Issue 1-2

Movement of moisture in decorative preservative protected wood

Authors:

Velimir Šćukanec, Božidar Petrić

Keywords:

decorative wood preservative; moisture movement in wood

Volume 37 (1986), Issue 11-12

Protection of joinery timber by steeping method

Authors:

Božidar Petrić, Velimir Šćukanec

Keywords:

protection of exterior joinery timber; steeping method.

Volume 37 (1986), Issue 3-4

Some possibilities of manufacturing fireproof plywood

Authors:

Stjepan Petrović, Josip Klekar

Keywords:

fireproof plywood; structural protection; phenol-formaldehyde glue

Volume 37 (1986), Issue 3-4

Preliminary investigation of fire-retardant treatments for flakeboards

Authors:

Theodore Laufenberg, Susan Le Van, Vladimir Bruči

Keywords:

fire protective chemicals; oxygen index

Volume 33 (1982), Issue 1-2

Influence of a state or air on durability of exhauster devices and pneumatic conveyors in woodworking industry

Authors:

Đuro Hamm

Keywords:

exhauster devices; pneumatic conveyors; calculation of hydrothermal state of pipeline

Volume 33 (1982), Issue 3-4

Fire prevention - stationary fire protection systems based on carbon dioxide (CO2)

Authors:

Željko Đidara

Keywords:

fire alarms; CO2 nozzels; alarm contrivance; »time delay« device

Volume 32 (1981), Issue 4

Istraživanja o mogućnostima primjene sunčane energije u hidrotermičkoj obradi drva

Authors:

Zdenko Pavlin

Keywords:

sušenje drva sunčanom energijom; konstrukcija sušionica na sunčanu energiju; prirodno i umjetno sušenje

Volume 32 (1981), Issue 9-10

Protection of joinery timber by dipping method

Authors:

Božidar Petrić, Velimir Šćukanec

Keywords:

absorption and penetration of organic solvent type preservative; dipping method

Volume 32 (1981), Issue 11-12

Researches in the field of hydrothermal processing of wood

Authors:

Zdenko Pavlin

Keywords:

drying and predrying of wood

Volume 29 (1978), Issue 5-6

Kora - otpadak ili gorivo?

Authors:

Zvonimir Preveden

Keywords:

bark; calorific value; combustion diagrams; environmental protection

Volume 26 (1975), Issue 11-12

Insulating efficiency and protection of the prefabricated wooden houses against condensed water

Authors:

Dragomir Ostojić

Keywords:

Experimental Investigation of Rotational Behavior of Glulam Column-Beam Connection Reinforced with Carbon, Glass, Basalt and Aramid FRP Fabric

The Influence of Different Wood Modifications on Pull-out Force of Rotary Welded Dowels

Analysis of the Effect of Gypsum-Based Fire Protection Cover on Charring of Wooden Bearing Elements

Long-Term Hygroscopic Thickness Swelling Rate of Hydrothermally Treated Beech Wood / Polypropylene Composites

Surface Roughness of Sliced Veneers in Terms of Defects and Wood Structure Variability – Impact of Mild Hydrothermal Treatment

Dependence of Dowel Joint Strength on Welding Temperature in Rotary Welding

Bio-based Methods with Potentials for Application in Wooden Furniture Industry

Anatomical, Chemical and Mechanical Characteristics of Beech Wood Degraded by Two Pleurotus Species

Hygrothermal Treatment of Tepa (Laureliopsis philippiana Looser) Fibers: Effects on Chemical and Physical Properties

Influence of Air Humidity Variation on Strength of Rotary Welded Dowel Joints of Pinewood

Thermal Stability of Wood Fibers Produced from Recycled Medium Density Fiberboards

Mechanical Properties and Formaldehyde Release of Boards Manufactured with Hygrothermally Treated Tepa (Laureliopsis Philippiana Looser) Particles

Production and Characterization of Bacterial Cellulose with Different Nutrient Source and Surface–Volume Ratios

Sudanese Dicots as Alternative Fiber Sources for Pulp and Papermaking

Microtensile Testing of Wood – Influence of Material Properties, Exposure and Testing Conditions on Analysis of Photodegradation

Influence of Lyophilisation and Oven-Drying on Extraction Yield of Oregonin from European Black Alder (Alnus glutinosa (L.) Gaertn.) Bark

Fiber Characteristics of White Poplar (Populus alba L.) Juvenile Wood along the Drava River

The Influence of Radial Slots on Dynamic Stability of Thermally Stressed Circular Saw Blade

Determination of the Effect of Liquid Glass (SiO2) on Color Stability of Wood Stained by Natural Dyes

Physical Properties of Boards Manufactured with Hygrothermally Treated Tepa (Laureliopsis Philippiana Looser) Particles

Comparison of Natural Frequencies Values of Circular Saw Blade Determined by Different Methods

Microtensile Testing of Wood – Overview of Practical Aspects of Methodology

Bioremediation of Lindane by Wood-Decaying Fungi

Possibilities for Thermography Application in Hydrothermal Wood Processing

Diagnostics of Circular Sawblade Vibration by Displacement Sensors

Influence of Thermal Modification of Beech on the Strength of Longitudinally Connected Turned Elements by Rotational Welding Method

Ecological issues of byproducts in hydrothermal wood processing

Selected properties of beech wood degraded by brown-rot fungus Coniophora puteana

Discolouration of coated cherry wood and maple wood surface in indoor use

Identification of critical speeds of clamped circular saws

Durability of wooden facades Part 1: Physical and structural protection

The prospects of wood as a shipbuilding material in Croatia

The dry rot fungus Serpula lacrymans - the major cause of wood decay in buildings

A Yield of American Walnut in Sliced Veneer Production

Croatian wood processing firms and water pollution

An investigation into the protection of wood from UV-radiation and water

Production possibilities for structurally protected plywood by chemical fire-retardants

Research of noise levels emitted by two-spindle moulders

Assessment of Wood Photodegradation by Microtensile Testing

Biotechnical wood protection in timber storage yards of woodworking plants

Wood protection and European regulations - part II

Contributions to the knowledge of the Adriatic sea wood marine borers

Researches on UV ozonization protection of elements made of wood and other wood components used in interiors

Performance of finishes on weather exposed wood joinery

Protection of fir wood joinery by double vacuum method

Production of Locust veneer (Robinia Pseudoacacia L.)

Movement of moisture in decorative preservative protected wood

Protection of joinery timber by steeping method

Some possibilities of manufacturing fireproof plywood

Preliminary investigation of fire-retardant treatments for flakeboards

Influence of a state or air on durability of exhauster devices and pneumatic conveyors in woodworking industry

Fire prevention - stationary fire protection systems based on carbon dioxide (CO2)

Istraživanja o mogućnostima primjene sunčane energije u hidrotermičkoj obradi drva

Protection of joinery timber by dipping method

Researches in the field of hydrothermal processing of wood

Kora - otpadak ili gorivo?

Insulating efficiency and protection of the prefabricated wooden houses against condensed water

Publisher