Archive

Volume 75 (2024), Issue 1

Efficiency Assessment Based on Data Envelopment Analysis for Occupational Accidents and Diseases in Furniture Industry of Turkey

DEA; data envelopment analysis; non-parametric evaluation methods; work accident and occupational health; furniture industry

Volume 75 (2024), Issue 2

A Benchmark for a New Nearly Zero Energy Wooden Building in Europe

Authors:

Erwin Schau, Eva Prelovšek Niemelä

Keywords:

benchmark; nearly zero energy building (nZEB); life cycle assessment (LCA); wood construction; environmental footprint

Volume 75 (2024), Issue 3

Effects of DES and Chlorite Delignification Methods on Properties of Transparent Wood Materials

Authors:

Eser Sozen, Deniz Aydemir, Gokhan Gunduz, Sezgin Koray Gülsoy

Keywords:

deep eutectic solvent; delignification; transparent wood; beech wood

Volume 74 (2023), Issue 1

Effects of Medium Density Fiberboards (MDF) Recycling Methods on Fiber Dimensions and Some Reconstructed Board Properties

Authors:

Çagri Olgun, Saim Ateş, Emre Uzer

Keywords:

waste MDF; recycling; recycled fibers; fiber properties; board strenght

Volume 72 (2021), Issue 4

Regional Clusters, Similarities, and Changes in Turkey’s Wood Production: A Comparative Analysis Using K-Means and Ward’s Clustering Methods

Authors:

Rıfat Kurt, Erol İmren

Keywords:

wood production; clustering; K-means, Ward’s method

Volume 72 (2021), Issue 1

Climate Signals in Earlywood, Latewood and Tree-Ring Width Chronologies of Sessile Oak (Quercus petraea (Matt.) Liebl.) from Majdanpek, North–Eastern Serbia

Authors:

Nenad Radaković, Branko Stajić

Keywords:

dendroecology; earlywood; latewood and tree-ring; pointer years; sessile oak; Serbia

Volume 71 (2020), Issue 3

Bio-based Methods with Potentials for Application in Wooden Furniture Industry

Authors:

Karin Hrovatin, Jasna Hrovatin

Keywords:

biotechnology; natural products; wood; furniture; wood protection; wood colouring; natural adhesives; wood functionalisation; biomimicry

Volume 68 (2017), Issue 4

Coatings for Use on Wooden Bicycle Frames – Applicability, Test Methods and Artificial Weathering Results

Authors:

Fabian Wulf, Moritz Sanne, Alexander Pfriem

Keywords:

wooden bicycle; wood coating; durability; artificial weathering; salt spray

Volume 67 (2016), Issue 4

Functionality and Aesthetics of Furniture - Numerical Expression of Subjective Value

Authors:

Mária Réka Antal, Danijela Domljan, Péter György Horváth

Keywords:

functionality; aesthetic functions; furniture; designers’ methods; customer demands; proportion

Volume 66 (2015), Issue 3

Vibration Based NDT Methods to Verify Wood Drying Efficiency

Authors:

Mostafa Kohantorabi, Mohammad Ali Hossein, Mahdi Shahverdi, Mehran Roohnia

Keywords:

acoustic; defect; non-destructive-test; wood drying

Volume 66 (2015), Issue 2

Comparison of Natural Frequencies Values of Circular Saw Blade Determined by Different Methods

Authors:

Ján Svoreň, Ľubomír Javorek, Adam Droba, Dušan Paulíny

Keywords:

circular saw blade; critical rotational speed; natural frequencies; finite element method

Volume 65 (2014), Issue 3

Data Filtration Methods of Electronic Measurement of Log Dimensions

Authors:

Veronika Hunková, Karel Janák

Keywords:

log yards; round wood; electronic reception; electronic measurement; data filtration

Volume 65 (2014), Issue 3

Differences in Values of Volume of Unedged Sawn Boards as a Result of Different Width Measurement Methods

Authors:

Andreja Čunčić Zorić, Zlatko Budrović, Kristijan Radmanović, Ivan Turkalj, Miroslav Zaborski, Marko Akmačić

Keywords:

unedged sawn boards; measuring of boards; board width; volume of sawn boards

Volume 65 (2014), Issue 1

Influence of the Sawing Method on Yield of Beech Logs with Red Heartwood

Authors:

Ranko Popadić, Borislav Šoškić, Goran Milić, Nebojša Todorović, Mladen Furtula

Keywords:

beech; sawmill processing; methods of sawing; yield; red heartwood

Volume 64 (2013), Issue 4

Effect of Cultivation Methods on Wood Static Bending Properties in Alnus Glutinosa

Authors:

Majid Kiaei

Keywords:

Alnus glutinosa; modulus of elasticity; modulus of rupture; Fiber stress at elastic limit; cultivation methods (natural and plantation forest)

Volume 64 (2013), Issue 3

Mode I Critical Stress Intensity Factor of Beech Wood (Fagus Sylvatica) in a TL Configuration: A Comparison of Different Methods

Authors:

Miran Merhar, Dominika Gornik Bučar, Bojan Bučar

Keywords:

fracture toughness; mode I critical stress intensity factor; fracture mechanics; beech wood

Volume 64 (2013), Issue 2

Standardized Methods for Determining and Estimating Wood Moisture Content in the Republic of Croatia

Authors:

Stjepan Pervan, Miljenko Klarić, Marko Slivar

Keywords:

Wood moisture content; oven-dry method; electrical method; capacitance method

Volume 63 (2012), Issue 3

Selected Ratio and Bankruptcy Early-Warning Method Analysis of Competitiveness of Wood Sector Companies Listed on Warsaw Stock Exchange

Authors:

Justyna Biernacka, Mariana Sedliačiková

Keywords:

ratio analysis; bankruptcy early-warning methods; competitiveness; wood sector companies

Volume 63 (2012), Issue 4

Choice of Quantitative Method for Forecasting of Parquet Sales

Authors:

Leon Oblak, Lidija Zadnik Stirn, Maja Moro, Jasna Hrovatin, Samo Mole, Manja Kitek-Kuzman

Keywords:

wood company; parquet; sales forecasting; quantitative methods; Holt-Winters multiplicative model

Volume 62 (2011), Issue 4

Extraction Methods of Spanish Broom (Spartium Junceum L.)

Authors:

Drago Katović, Andrea Katović, Alan Antonović

Keywords:

Spanish Broom fibers; fiber extraction; chemical composition; FTIR; MW

Volume 62 (2011), Issue 3

Comparing of Employees Motivation Level in Enterprises of Wood Working Industry with other Manufacturing Enterprises in Slovak Republic

Authors:

Miloš Hitka, Lenka Štípalová

Keywords:

Employee motivation; motivational program; methods of motivation analysis

Volume 60 (2009), Issue 4

Scientific Methods for Determination of Wooden Corner Joint Designs

Authors:

Silvana Prekrat, Nikola Španić

Keywords:

furniture; wooden construction joint; rigidity; computational models

Volume 60 (2009), Issue 2

Comparison of percentage of wood fracture surface analyzed by computer and by ISO 6238 in determining the quality of adhesive bonds

Authors:

Alica Lojen, Goran Mihulja, Ivica Župčić, Andrija Bogner

Keywords:

gluing quality; portion of wood failure; subjective and objective methods

Volume 58 (2007), Issue 2

Strength and durability of glued wood Part two: Glue joint strength testing methods

Authors:

Goran Mihulja, Andrija Bogner

Keywords:

glued joint; type and shape of specimen; gluing strength; surface failure area; specimen deformation

Volume 58 (2007), Issue 1

Methods for improving building wood properties

Authors:

Vlatka Jirouš-Rajković, Hrvoje Turkulin, Vjekoslav Živković

Keywords:

wood modification; heat-treated wood; acetylation; nano-coatings; wood-plastic composites; WPC

Volume 56 (2005), Issue 4

Differences in volume of round timber caused by different determination methods

Authors:

Karel Janák

Keywords:

round timber; dimension measurement; log volume

Volume 55 (2004), Issue 4

Alternative agents and methods for chemical modification of wood

Authors:

Drago Katović, Jelena Trajković, Sandra Bischof Vukušić, Bogoslav Šefc

Keywords:

chemically modified wood; citric acid - CA; DMDHEU; microwave treatment; dimensional stability; discoloration

Volume 55 (2004), Issue 3

Possible use of Euclid`s second theorem to determine the growth ring characteristics

Authors:

Ilker Usta, Radovan Despot, Marin Hasan

Keywords:

Euclid's second theorem; growth ring characteristics; Sytka spruce; earlywood; latewood

Volume 51 (2000), Issue 4

The dry rot fungus Serpula lacrymans - the major cause of wood decay in buildings

Authors:

Radovan Despot, Jelena Trajković, Bogoslav Šefc

Keywords:

Serpula lacrymans Wulfen: Fr.; Schroeter; dry rat fungi; wood preservatives; preservation methods

Volume 49 (1998), Issue 1

Comparison of the yield for three methods of fir/spruce logs sawing

Authors:

Jurica Butković

Keywords:

value yield; radial sawn timber; tangential sawn timber

Volume 47 (1996), Issue 4

Lyctus powderpost beetles - the most frequent woodboring insects in oakwood and ashwood parquet

Authors:

Radovan Despot

Keywords:

Lyctus powderpost beetle (Lyctidae spp.); oakwood; ashwood; parquet; block or strip flooring; preservation methods

Volume 47 (1996), Issue 3

Methods for Testing the Resistance of Wood Hotmelt Adhesives to Temperature Changes and Weathering

Authors:

Andrija Bogner, Boris Ljuljka, Ivica Grbac

Keywords:

hotmelts; edge-bonding strength; testing methods

Volume 44 (1993), Issue 3

Determination of the quantity of the formaldehyde release of plywood by different methods

Authors:

Božidar Lapaine, Vladimir Jambreković

Keywords:

Volume 44 (1993), Issue 3

Influence of the sawing method on yields in fir/spruce log milling

Authors:

Jurica Butković

Keywords:

sawing methods; fir/spruce; yield

Volume 42 (1991), Issue 3-4

Methodical designing supported by computers in furniture industry

Authors:

Silvana Prekrat

Keywords:

methods of designing and constructing; clesigning by use of computers; computer and program equipment; furniture structures

Volume 39 (1988), Issue 5-6

Cybernetic control system methods in computer aided manufacture of furniture - Method II.

Authors:

Zvonimir Ettinger

Keywords:

Cybernetic control system; computer; orgware; hardware; lifeware; software; electronic control of production process

Volume 39 (1988), Issue 3-4

Cybernetic control system methods in computer aided manufacture of furniture - 1st method

Authors:

Zvonimir Ettinger

Keywords:

cybernetic control system method; computers; orgware; hardware; lifeware; software; electronic control of manufacturing process

Volume 38 (1987), Issue 9-10

Current research and development of work methods and technique in forestry

Authors:

Ivan Martinić

Keywords:

Volume 35 (1984), Issue 7-8

Efect of control system methods on stock of finished products in production of furniture

Authors:

Zvonimir Ettinger

Keywords:

control system method; system objectives; macroplan of system; data processing; microplan of system; cybernctic system; electronically operated production process

Volume 34 (1983), Issue 7-8

Determination of quantity of glue in wood-based panel products

Authors:

Salah-Eldien Omer

Keywords:

chemical and physical methods; infrared spectrometry and X-ray spectrometry

Volume 34 (1983), Issue 9-10

Methodical constructing - new approach to construction and design of new products

Authors:

Stjepan Tkalec

Keywords:

methodical constructing; intuitive and discursive methods of designing; constructional working out; coefficient of coordination

Volume 32 (1981), Issue 3

Testing of some physical and mechanical properties of particleboards for production of furniture and interior applications

Authors:

Salah-Eldien Omer

Keywords:

Properties of particleboards according to JUS, BS and ASTM; new methods of testing particleboards

Volume 31 (1980), Issue 5-6

Reestablishment of evidences and comparisons of business results in woodworking industry

Authors:

Bogomil Čop

Keywords:

conversion costs by species of wood and sawing methods; calculation of mills; comparison of business systems

Volume 31 (1980), Issue 9-10

One of possible methods of rationalization of operations in the woodworking industry process

Authors:

Zdravko Fučkar

Keywords:

relation between the input and the output; establishment of condition; rationalization of moulding operations; calculation of effects

Volume 29 (1978), Issue 11-12

Contribution to quality tests on the storage units

Authors:

Drago Biondić, Božidar Sinković, Boris Ljuljka

Keywords:

methods of testing storage units; storage units structure; stiffness; reliability of product; simulated conditions of usage

Volume 29 (1978), Issue 1-2

Smelting adhesives for gluing edges (1)

Authors:

Željko Šonje

Keywords:

smelting adhesives; temperature of smelting; time of smelting; capability of flowing; firmness of glowing; methods of testing shearing strength

Volume 29 (1978), Issue 5-6

Utilization of low quality beech logs sawn on band saw by two different methods

Authors:

Marko Gregić

Keywords:

conversion of Iow quality beech Iogs; »radial« and »tangential« sawing on band saws; quantity, quality and value yield

Volume 28 (1977), Issue 9-10

Function state analysis of work study in SR Croatia woodworking industry

Authors:

Mladen Figurić

Keywords:

work study; qualification structure; work schedule; working methods; determined work time

Volume 27 (1976), Issue 1-2

Sitting furniture, some of its properties and methods of testing

Authors:

Boris Ljuljka

Keywords:

Volume 27 (1976), Issue 3-4

Application of statistical methods in glue testing

Authors:

Željko Šonje

Keywords:

Volume 27 (1976), Issue 5-6

Application of statistical methods in glue testing

Authors:

Željko Šonje

Keywords:

Efficiency Assessment Based on Data Envelopment Analysis for Occupational Accidents and Diseases in Furniture Industry of Turkey

A Benchmark for a New Nearly Zero Energy Wooden Building in Europe

Effects of DES and Chlorite Delignification Methods on Properties of Transparent Wood Materials

Effects of Medium Density Fiberboards (MDF) Recycling Methods on Fiber Dimensions and Some Reconstructed Board Properties

Regional Clusters, Similarities, and Changes in Turkey’s Wood Production: A Comparative Analysis Using K-Means and Ward’s Clustering Methods

Climate Signals in Earlywood, Latewood and Tree-Ring Width Chronologies of Sessile Oak (Quercus petraea (Matt.) Liebl.) from Majdanpek, North–Eastern Serbia

Bio-based Methods with Potentials for Application in Wooden Furniture Industry

Coatings for Use on Wooden Bicycle Frames – Applicability, Test Methods and Artificial Weathering Results

Functionality and Aesthetics of Furniture - Numerical Expression of Subjective Value

Vibration Based NDT Methods to Verify Wood Drying Efficiency

Comparison of Natural Frequencies Values of Circular Saw Blade Determined by Different Methods

Data Filtration Methods of Electronic Measurement of Log Dimensions

Differences in Values of Volume of Unedged Sawn Boards as a Result of Different Width Measurement Methods

Influence of the Sawing Method on Yield of Beech Logs with Red Heartwood

Effect of Cultivation Methods on Wood Static Bending Properties in Alnus Glutinosa

Mode I Critical Stress Intensity Factor of Beech Wood (Fagus Sylvatica) in a TL Configuration: A Comparison of Different Methods

Standardized Methods for Determining and Estimating Wood Moisture Content in the Republic of Croatia

Selected Ratio and Bankruptcy Early-Warning Method Analysis of Competitiveness of Wood Sector Companies Listed on Warsaw Stock Exchange

Choice of Quantitative Method for Forecasting of Parquet Sales

Extraction Methods of Spanish Broom (Spartium Junceum L.)

Comparing of Employees Motivation Level in Enterprises of Wood Working Industry with other Manufacturing Enterprises in Slovak Republic

Scientific Methods for Determination of Wooden Corner Joint Designs

Comparison of percentage of wood fracture surface analyzed by computer and by ISO 6238 in determining the quality of adhesive bonds

Strength and durability of glued wood Part two: Glue joint strength testing methods

Methods for improving building wood properties

Differences in volume of round timber caused by different determination methods

Alternative agents and methods for chemical modification of wood

Possible use of Euclid`s second theorem to determine the growth ring characteristics

The dry rot fungus Serpula lacrymans - the major cause of wood decay in buildings

Comparison of the yield for three methods of fir/spruce logs sawing

Lyctus powderpost beetles - the most frequent woodboring insects in oakwood and ashwood parquet

Methods for Testing the Resistance of Wood Hotmelt Adhesives to Temperature Changes and Weathering

Determination of the quantity of the formaldehyde release of plywood by different methods

Influence of the sawing method on yields in fir/spruce log milling

Methodical designing supported by computers in furniture industry

Cybernetic control system methods in computer aided manufacture of furniture - Method II.

Cybernetic control system methods in computer aided manufacture of furniture - 1st method

Current research and development of work methods and technique in forestry

Efect of control system methods on stock of finished products in production of furniture

Determination of quantity of glue in wood-based panel products

Methodical constructing - new approach to construction and design of new products

Testing of some physical and mechanical properties of particleboards for production of furniture and interior applications

Reestablishment of evidences and comparisons of business results in woodworking industry

One of possible methods of rationalization of operations in the woodworking industry process

Contribution to quality tests on the storage units

Smelting adhesives for gluing edges (1)

Utilization of low quality beech logs sawn on band saw by two different methods

Function state analysis of work study in SR Croatia woodworking industry

Sitting furniture, some of its properties and methods of testing

Application of statistical methods in glue testing

Application of statistical methods in glue testing

Publisher