Archive

Musa Atar, Fazli Gode, Mustafa Kucuktuvek, Asli Er Akan, Hilal Tugba Ormecioglu, Hakan Keskin

tensile performance; construction materials; corner joints; wooden joints

Volume 73 (2022), Issue 2

Automatic Damage Detection on Traditional Wooden Structures with Deep Learning-Based Image Classification Method

Kemal Haciefendioglu, Hasan Basri Başaga, Murat Emre Kartal, Mehmet Ceyhun Bulut

deep learning method, convolutional neural networks, MobileNet_V2, Inception_V3, ResNet_ V2_50, wooden structures

Volume 73 (2022), Issue 2

Surface Roughness of Sliced Veneers in Terms of Defects and Wood Structure Variability – Impact of Mild Hydrothermal Treatment

Vasiliki Kamperidou, Efstratios Aidinidis, Ioannis Barboutis

knot, modification, quality, surface property, texture, veneer

Volume 70 (2019), Issue 4

Influence of Layered Structure of Composite Timber Floor Boards on Their Hardness

Piotr Borysiuk, Izabela Burawska-Kupniewska, Radosław Auriga, Grzegorz Kowaluk, Paweł Kozakiewicz, Marcin Zbieć

veneer; composite; flooring material; knotholes; hardness

Volume 70 (2019), Issue 1

Influence of Finishing Materials on Viscous Elastic Properties of Wooden Structures

Darius Albrektas, Elvyra Revuckaitė, Vaida Dobilaitė, Milda Jucienė

oak wood; pine wood; modulus of elasticity; damping coefficient; finishing materials; pentaftal varnish; wood oil

Volume 69 (2018), Issue 4

Comparison of Finite Element Models for Particle Boards with Homogenous and Three-Layer Structure

Jaroslav Kljak, Nikola Španić, Vladimir Jambreković

particle board; structure; finite element (FE) model; bending properties

Volume 69 (2018), Issue 3

Effects of Catalysts on Modulus of Rupture and Chemical Structure of Heat – Treated Wood

Ayhan Ozcifci, Erkan Sami Kokten, Nadir Ayrilmis, Günay Özbay, Suat Altun

heat treatment; Scotch pine; mechanical strength; catalyst; chemical properties

Volume 68 (2017), Issue 4

Cone Morphology as a Diagnostic Attribute of Resonant Properties of Standing Spruce Wood

Vladimir Fedyukov, Ekaterina Saldayeva, Maria Chernovа, Vasilii Chernov

sonorous spruce; cone biomorphology; wood macrostructure; density; sound velocity; acoustic constant; dendroacoustic indices identification

Volume 67 (2016), Issue 2

Wavelet Analysis of X-ray Density Function of Tree Ring Structure

Levente Csoka

Juvenile/mature wood; Hurst exponent; tracheid length; X-ray densitometry; wavelet transform

Volume 66 (2015), Issue 4

Effects of Nanosilver-Impregnation and Heat Treatment on Coating Pulloff Adhesion Strength on Solid Wood

Hamid Reza Taghiyari, Amir Samadarpour

coating; nanotechnology; heat treatment; permeability; porous structure; solid wood

Volume 65 (2014), Issue 4

Forest Resources and Sawmill Structure of Kosovo: State of the Art and Perspectives

Agron Bajraktari, Alexander Petutschnigg, Muhamet Ymeri, Zeki Candan, Süleyman Korkut, Lina Nunes, Helena Pereira

forest resources; sawmills; Kosovo

Volume 64 (2013), Issue 2

The Dilemma Whether to Produce Glued or Sawn Wooden Beams?

Michal Zeman

production of static structural members; trends; production of BSH and KVH; sawn wooden beams; timber costs; wooden structures; cost- effectiveness

Volume 64 (2013), Issue 1

Models of Hybrid Springs for Ergonomic Seats and Mattresses

Jerzy Smardzewski

ergonomics; hybrid spring; mattress; numerical analysis; seat; stiffness

Volume 62 (2011), Issue 3

Determining the Characteristics of Composite Structure Laminae by Optical 3D Measurement of Deformation with Numerical Analysis

Biserka Nestorović, Dušan Skakić, Ivica Grbac

optical 3D measurement; chair; shell; composite; material constants; stress; beech wood; finite elements

Volume 61 (2010), Issue 3

Glued Laminated Timber in Architecture

Manja Kitek-Kuzman, Leon Oblak, Srečko Vratuša

wood structure; glued laminated timber (glulam); structural elements; composite

Volume 59 (2008), Issue 2

Research of educational structure in wood processing and furniture production sector

Darko Motik, Maja Moro, Renata Ojurović, Andreja Pirc Barčić, Herman Sušnik

wood sector; educational structure; high education

Volume 54 (2003), Issue 3

New possibilities in structural design and testing of wooden structures?

Zvonimir Žagar, Goran Janjuš

timber structures; GLULAM; artificial neural networks (ANN); neural shells; expert systems; parametric FE models; FE analysis; Eurocodes (EC); run-time ANN module

Volume 54 (2003), Issue 1

Comparative test of mattresses according to new and old Croatian standards

Zoran Savić, Slaven Fiala, Zoran Vlaović, Želimir Ivelić, Ivica Grbac

quality testing; mattress; hardness; firmness and height loss

Volume 52 (2001), Issue 4

Quality of beech trees from regeneration fellings of Bilogora region

Ante P. B. Krpan., Marinko Prka

beech regeneration fellings; stem quality; assortment structure

Volume 51 (2000), Issue 1

The influence of the structure of three-layer particle boards on the thickness and density of surface layer

Sergej Medved, Vladimir Jambreković

particleboard; spruce; beech; oak; poplar; surface layer; core layer; particle geometry; vertical density distribution; layer thickness; layer density

Volume 49 (1998), Issue 1

Research into thermal conductivity and moisture permeability of different mattress structures

Ivica Grbac, Bojana Dalbelo Bašić

quality of sleeping; mattress structures; thermal conductivity; moisture permeability; upholstery materials

Volume 48 (1997), Issue 1

Strength of joints in chairs made of beech and pine

Stjepan Tkalec, Silvana Prekrat

technical design; chair structure; glued wood joints; joint strength

Volume 47 (1996), Issue 3

Establishment of specific drying energy of oak-wood flooring deal and thermodynamic model of drying

Miljenko Primorac, Stjepan Risović

drying energy of wood; specific energy of wood drying; irreversible heat engine; thermodynamic model of wood proceses; capillary diameters of wood structure; moisture of wood and structural openings; heat of evaporation

Volume 46 (1995), Issue 3

Wood-technological sciences-structure and trends

Mladen Figurić, Darko Motik

biotehnical sciences; wood technological sciences; structure; trends

Volume 46 (1995), Issue 4

Research on interactions between tehnology and production organization in wood processing

woodprocessing technology; work time structure; operation time; additional time; preparatory and finishing time; correlation; significance

Volume 45 (1994), Issue 4

Thermal conductivity and moisture permeability in mattress

Ivica Grbac, Bojana Dalbelo Bašić

thermal conductivity; moisture permeability; mattress structure; mattress quality

Volume 42 (1991), Issue 1-2

Structure properties and use of water bed (II)

Ivica Grbac

Volume 42 (1991), Issue 3-4

Methodical designing supported by computers in furniture industry

Silvana Prekrat

methods of designing and constructing; clesigning by use of computers; computer and program equipment; furniture structures

Volume 41 (1990), Issue 11-12

Structure, properties and use of water bed (I)

Ivica Grbac

water bed; comfortable lying; water bed structure; sound sleep

Volume 41 (1990), Issue 7-8

Four decades of publishing of the review »Drvna industrija« 1950-1990

Dinko Tusun

technical-and-scientific journal; journal editing; journal subject matters; structure of published papers

Volume 41 (1990), Issue 3-4

Variation of fir wood structure from region of Gorski kotar

Božidar Petrić, Jelena Trajković, Radovan Despot

fir wood; variation of growth ring widths tracheid dimensions; volume percentages of tracheids and wood rays

Volume 40 (1989), Issue 7-8

Strategy for change of Yugoslav export structure of wood products into Italy

Ante Ivišić

structure of production and export; export of wood product; Yugoslav-Italian trade

Volume 37 (1986), Issue 3-4

Structure dimension tendency of sawmill conifer logs

Zdravko Stupar

average log diameter; log taper

Volume 36 (1985), Issue 7-8

Timber buildings structures in the USSR

Jindrich Frais

timber houses; glued beams; wallpanels in building construction

Volume 34 (1983), Issue 1-2

Sociological and professional characteristics of workers and their influence on efficiency of work in sawmilling in region of Slavonia and Baranja

Petar Madžarac

qualifying structure of workers; distance from place of residence to work place; labour turnover

Volume 34 (1983), Issue 7-8

Research of quantitative and qualitative utilization of thin beech round logs

Ramiz Zubčević

thin beech logs; quantitative utilization; quantitative structure of assortments

Volume 34 (1983), Issue 11-12

Contribution to objectivization of diagnosing and designing of organizational systems in wood working industry

organizational structure; organizational potential

Volume 32 (1981), Issue 5-6

Research study on the structure of work in the system wood products manufacture - timber and wood products trade

structure of work; work study; complexity of job; work analysis

Volume 31 (1980), Issue 7-8

Contribution to examination of influences of some technological factors on the quality of wood gluing

Stjepan Petrović, Vladimir Ferdelji

laminated wood structures; factorial plan of experiment; level of the factor influence; shearing strength; penetration of glue into the wood; significance of the factor influence

Volume 30 (1979), Issue 4

Dependence of impregnation of coniferous wood on its anatomic structure

Slavko Kovačević, Magda Hlevnjak

tracheid; parenchyma cells; pits; distribution of preservative solutions in the coniferous wood; aspiration of pits because of coniferous wood drying

Volume 30 (1979), Issue 5-6

Practical application of the system theory in evaluation of job complexity in wood industry

job evaluation in wood industry; »input-output« method; complexity of input; complexity of system structure; complexity of output; synergical effect

Volume 29 (1978), Issue 11-12

Contribution to quality tests on the storage units

Drago Biondić, Božidar Sinković, Boris Ljuljka

methods of testing storage units; storage units structure; stiffness; reliability of product; simulated conditions of usage

Volume 28 (1977), Issue 9-10

Function state analysis of work study in SR Croatia woodworking industry

work study; qualification structure; work schedule; working methods; determined work time

Volume 28 (1977), Issue 11-12

Use of glued prestressed wooden material in civil engineering structures

Ninoslav Lovrić