Archive

Volume 75 (2024), Issue 2

The Effect of Type of Reinforcement, Type of Glue and Reinforcement Place on Mechanical and Physical Properties of LVL

Authors:

İlkay Atar, Fatih Mengeloğlu

Keywords:

reinforced LVL; glass fiber; basalt; epoxy; phenol formaldehyde

Volume 75 (2024), Issue 3

Evaluation of Some Physico-Mechanical Properties and Formaldehyde Emission of Ecological Chipboards Produced from Annual Residue Plant Stems

Authors:

Celal Uğur, İbrahim Bektaş

Keywords:

annual residue plants; physico-mechanical properties; formaldehyde emission; ecological chipboards

Volume 74 (2023), Issue 3

Improving Surface Quality of Resin Impregnated Paper Used for Laminated Flooring Overlaid

Authors:

Meltem Cengiz Önal, Ahmet Gençer, Tülin Gürkan Polat, Abdullah Sütçü

Keywords:

melamine-faced laminate; surface modification; experiment design; functional coating

Volume 74 (2023), Issue 3

Optimization of Production Parameters of Densified Laminated Veneer Lumber Produced by Using Urea-Formaldehyde Resin

Authors:

Saadettin Murat Onat, Serkan Özdemir

Keywords:

densification; laminated veneer lumber; urea formaldehyde; processing parameters; Taguchi method based grey relational analysis

Volume 74 (2023), Issue 4

Effect of Epoxy Resin Reinforcement on Screw Withdrawal Strength of Fiberboard and Particleboard Used in Furniture Industry

Authors:

Mesut Uysal, Cagatay Tasdemir, Memis Dogan

Keywords:

epoxy resin; reinforcement; screw withdrawal strength; medium density fiberboard; particleboard

Volume 74 (2023), Issue 1

Synthesis of Phenolic Resin Reinforced with TiO2 Nanoparticles and its Effect on Combustion Performance of Laminated Veneer Lumber (LVL)

Authors:

Günay Özbay, Musa Atar, Ayhan Ozcifci

Keywords:

adhesive; combustion; FT-IR; nano-chemicals; TiO2 nanoparticles

Volume 74 (2023), Issue 2

Potential Use of Olive Stone Residues in Particleboard Production

Authors:

Gökay Nemli, Uğur Aras, Hulya Kalaycioglu, Suleyman Kustas

Keywords:

olive stone residues; particleboard; physical and mechanical properties; formaldehyde emissions

Volume 73 (2022), Issue 4

Effects of Silane Treatment on Physical and Mechanical Properties of Particleboards Prepared with Urea Formaldehyde

Authors:

Saadettin Murat Onat, Orhan Kelleci

Keywords:

silane; particleboard; physical and mechanical properties

Volume 73 (2022), Issue 4

Optimization for Green Path in Wood Extractives by Taguchi Analysis

Authors:

Ayben Kilic Pekgözlü, Esra Ceylan, Ayhan Gençer, Rıfat Kurt

Keywords:

deep eutectic solvent; Pinus pinaster; resin acids; choline chloride; ethylene glycol; urea; Taguchi analysis

Volume 73 (2022), Issue 2

Characterization of Formaldehyde Emission and Combustion Properties of Peanut (Arachis Hypogaea) Husk-Based Green Composite Panels for Building Applications

Authors:

Ersin Ercan, Musa Atar, Mustafa Kucuktuvek, Hakan Keskin

Keywords:

particleboard, peanut husk, combustion properties, formaldehyde emission, green building materials

Volume 72 (2021), Issue 3

Effect of Using Urea Formaldehyde Modified with Extracts in Plywood on Formaldehyde Emission

Authors:

Ugur Bilgin, Gursel Colakoglu

Keywords:

formaldehyde emission; plywood; elm bark; hazelnut husk; tannin; urea formaldehyde

Volume 72 (2021), Issue 3

Possibility of Use of NCC Reinforced Melamine-Urea-Formaldehyde Adhesive in Plywood Manufacturing

Authors:

Jakub Kawalerczyk, Dorota Dziurka, Radosław Mirski, Joanna Siuda, Marta Babicka

Keywords:

plywood; melamine-urea-formaldehyde adhesive; nanocellulose; filler

Volume 71 (2020), Issue 3

Adhesivity of Bio-Based Anhydrous Citric Acid, Tannin-Citric Acid and Ricinoleic Acid in the Properties of Formaldehyde-Free Medium Density Particleboard (MDP)

Authors:

Divino Eterno Teixeira, Danielle do Carmo Pereira, Ana Paula Diniz Nakamura, Sarah Silva Brum

Keywords:

Eucalyptus grandis; bio-based adhesives; particleboards; bonding capacity; FTIR analysis; EN requirements

Volume 71 (2020), Issue 1

Synthesis of Bio-Oilphenol-Formaldehyde Resins under Alkali Conditions: Physical, Chemical and Thermal Properties of Resins and Bonding Performance

Authors:

Günay Özbay, Caglar Cekic, Muhammad Syarhabil Ahmad, Erkan Sami Kokten

Keywords:

bio-phenol; bonding performance; phenol formaldehyde resin; shear strength

Volume 71 (2020), Issue 1

Experimental Study on Combustion Properties and Thermo-Gravimetric Analyses of Oriented Strand Board (OSB)

Authors:

Fatih Yapici

Keywords:

oriented strand board; combustion; thermo-gravimetric analysis; phenol-formaldehyde

Volume 71 (2020), Issue 1

Properties of Plywood Produced with Urea-Formaldehyde Adhesive Modified with Nanocellulose and Microcellulose

Authors:

Jakub Kawalerczyk, Dorota Dziurka, Radosław Mirski, Kinga Szentner

Keywords:

nanocellulose; microcellulose; urea-formaldehyde resin; plywood; modification

Volume 71 (2020), Issue 4

An in Vitro Study on Antifungal Properties, Total Polyphenolic Content and Antioxidant Activity of Different Parts of Selected Fruit Trees

Authors:

Derya Ustaömer, Elif Topaloğlu, Bilge Yilmaz, Hüseyin Serencam, İlhan Deniz

Keywords:

antioxidant; antifungal; bark; date plum; loquat; olive; wood

Volume 71 (2020), Issue 4

Effect of Natural Resin from Wild Pistachio Trees on Physical Properties and Durability of Beech Wood: Alone and in Combination with Boric Acid

Authors:

Soheila Izadyar, Yaser Babaei, Davood Efhamisisi

Keywords:

pistachio trees; natural resin; weight gain; durability; physical properties

Volume 71 (2020), Issue 4

Mechanical Properties and Free Formaldehyde Content of Particleboards Produced using Ammonium Sulphate-Based Hardener Partially Replaced with Tartaric Acid

Authors:

Nikola Španić, Vladimir Jambreković, Goran Mihulja, Željko Milanović

Keywords:

particleboards; hardener; tartaric acid; mechanical properties; free formaldehyde content

Volume 69 (2018), Issue 4

Effects of Nano-Clay on Physical and Mechanical Properties of Medium-Density Fiberboards Made from Wood and Chicken-Feather Fibers and Two Types of Resins

Authors:

Pantea Omrani, Hamid Reza Taghiyari, Mostafa Zolghadr

Keywords:

feather fibers; mineral materials; nano-composites; clay nanofibers; wood fiber

Volume 69 (2018), Issue 4

Screw Withdrawal Resistance and Surface Soundness of Three-Layer Fiberboard Having Coarse Fibers in Core Layer

Authors:

Nadir Ayrilmis, Turgay Akbulut

Keywords:

coarse fiber; resin; surface soundness; screw withdrawal resistance; three-layer fibreboard

Volume 69 (2018), Issue 3

Supplementation of Natural Tannins as an Alternative to Formaldehyde in Urea and Melamine Formaldehyde Resins used in MDF Production

Authors:

Sima Sepahvand, Kazem Doosthosseini, Hamidreza Pirayesh, Behrooz Karamdoost Maryan

Keywords:

Tannin; MF; UF; Formaldehyde emission; MDF

Volume 69 (2018), Issue 3

Effect of Extraction Technique on Composition of Volatile Constituents of Oleoresin from Pinus Brutia Ten.

Authors:

Samim Yasar, Abdullah Beram, Gurcan Guler

Keywords:

volatile constituents; oleoresin; hydrodistillation; solid phase microextraction (SPME); GC/MS

Volume 69 (2018), Issue 3

The Impact of Nanoparticles and Moisture Content on Bonding Strength of Urea Formaldehyde Resin Adhesive

Authors:

Timuçin Bardak, Eser Sozen, Kadir Kayahan, Selahattin Bardak

Keywords:

nanoparticles; urea formaldehyde; moisture content; lap joint shear strength; bonding strength

Volume 69 (2018), Issue 2

Mechanical Properties and Formaldehyde Release of Boards Manufactured with Hygrothermally Treated Tepa (Laureliopsis Philippiana Looser) Particles

Authors:

Rommel Crespo Gutiérrez, Luis Valenzuela, Hernán Wilson

Keywords:

Particleboard; hygrothermal treatment; Laureliopsis philippiana; urea-formaldehyde; particle geometry; mechanical properties; formaldehyde release Hrčak ID: 202891

Volume 69 (2018), Issue 2

Formaldehyde Release from Plywood Manufactured with Two Types of Urea Formaldehyde Resins after Fire Retardant Treatment of Veneers

Authors:

Aydin Demir, Ismail Aydin, Hasan Ozturk

Keywords:

formaldehyde release; plywood; veneer; fire retardant; urea formaldehyde

Volume 68 (2017), Issue 2

Measuring the Formaldehyde Content from Different Types of Oriented Strand Board Manufactured with Different Thicknesses and Glued with Different Resins

Authors:

Mohamed Z. M. Salem, Martin Böhm, Ramadan Nasser

Keywords:

construction panels; formaldehyde content; green products; OSB

Volume 67 (2016), Issue 4

Wood Waste Turned Into Value Added Products: Thermal Plasticization by Benzylation Process

Authors:

Birol Üner, Gökhan Köse, Yeşim Yürümez, Ömer Ümit Yalçın, Mehmet Akgül

Keywords:

thermoplastic resin; hydrogen bond energy; crystallinity; thermal properties

Volume 67 (2016), Issue 2

Resin Content and Board Density Dependent Mechanical Properties of One-Layer Particleboard Made from Willow (Salix viminalis)

Authors:

Krzysztof Warmbier, Maciej Wilczyński

Keywords:

particleboard; Salix viminalis; mechanical properties; resin content; density

Volume 67 (2016), Issue 1

Review on Lipophilic and Hydrophilic Extractives in Tissues of Common Beech

Authors:

Viljem Vek, Primož Oven, Ida Poljanšek

Keywords:

beech; extractives; fatty acids; sterols; sugars; phenols; catechin; chromatography

Volume 66 (2015), Issue 3

Chemical Composition of Oleoresin and Larvae Gallery Resin of Pinus Brutia Attacked by Dioryc tria Sylvestrella Ratz.

Authors:

Mehmet Öz, İlhan Deniz, Onur Tolga Okan, M. Said Fidan

Keywords:

Acid-Paste Method; Dioryctria sylvestrella Ratz; Larvae gallery resin; Oleoresin; Pinus brutia

Volume 66 (2015), Issue 3

Influence of Adhesive Type on the Properties of LVL Made from Paricá (Schizolobium amazonicum Huber ex. Ducke) Plantation Trees

Authors:

Rafael Rodolfo de Melo, Cláudio Henrique Soares Del Menezzi

Keywords:

Wood products; Lumber; Adhesive; Polyvinyl Acetate Crosslinking; Polyurethane; Phenol-Formaldehyde

Volume 65 (2014), Issue 4

Properties of Modified Phenol-Formaldehyde Adhesive for Plywood Panels Manufactured from High Moisture Content Veneer

Authors:

Pavlo Bekhta, Galyna Ortynska, Jan Sedliacik

Keywords:

gluing; veneer; high moisture content; plywood; phenol-formaldehyde resin; modifying agents

Volume 65 (2014), Issue 2

Properties of Liquid and Polycondensed UF Resin Modified with pMDI

Authors:

Dorota Dziurka, Radosław Mirski

Keywords:

UF; pMDI; hybrid resin; FTIR; hydrophobicity

Volume 64 (2013), Issue 1

Content of Total Phenols in Red Heart and Wound-Associated Wood in Beech (Fagus sylvatica L.)

Authors:

Viljem Vek, Primož Oven, Ida Poljanšek

Keywords:

phenols; spectrophotometry; reaction zone; Folin-Ciocalteu reagent; beech

Volume 64 (2013), Issue 3

Influence of the Addition of Urea-Formaldehyde Adhesive to Liquefied Wood on Curing

Authors:

Aleš Ugovšek, Milan Šernek

Keywords:

liquefied wood; urea-formaldehyde adhesive; differential scanning calorimetry; rheometry; shear strength

Volume 64 (2013), Issue 2

Evaluation of Mechanical Properties and Formaldehyde Emission of Plywood Manufactured for Construction Applications

Authors:

Mohamed Z. M. Salem, Martin Böhm, Jaromír Srba

Keywords:

mechanical properties; formaldehyde emission; beech plywood; European small-scale chamber; gas analysis

Volume 62 (2011), Issue 3

Formaldehyde Emission from Wood-Based Panels Bonded with Different Formaldehyde-Based Resins

Authors:

Mohamed Z. M. Salem, Martin Böhm, Štefan Barcík, Jitka Beránková

Keywords:

formaldehyde emission; formaldehyde-based resins; wood-based panels; chamber method; gas analysis method

Volume 62 (2011), Issue 1

Impact of Resin Content on Swelling Pressure of Three Layer Perticleboard Bonded with Urea-Formaldehyde Adhesive

Authors:

Sergej Medved, Alan Antonović, Vladimir Jambreković

Keywords:

particleboards; resin content; swelling; swelling pressure

Volume 61 (2010), Issue 1

Influence of Urea-Formaldehyde Resin Modification with Liquefied Wood on Particleboard Properties

Authors:

Alan Antonović, Vladimir Jambreković, Jaroslav Kljak, Nikola Španić, Sergej Medved

Keywords:

liquefied wood (LW); composite materials; urea-formaldehyde (UF) resin modification; liquefied wood-formaldehyde (LWF) resin

Volume 61 (2010), Issue 4

UF-pMDI Hybrid Resin for Waterproof Particleboards Manufactured at a Shortened Pressing Time

Authors:

Dorota Dziurka, Radosław Mirski

Keywords:

particleboard; UF resin; pMDI; water resistance; mechanical properties

Volume 53 (2002), Issue 1

Influence of carbon fibers on some relevant properties of veneer plywood

Authors:

Mladen Brezović, Vladimir Jambreković, Jaroslav Kljak

Keywords:

veneer plywood; carbon fibres; mechanical properties; resorcine phenol formaldehyde adhesive

Volume 53 (2002), Issue 2

Effect of duration of storage of MUF resin on the wetting angle on beechwood

Authors:

Jože Resnik, Tomaž Sovinc

Keywords:

wetting angle; MUF adhesive; viscosity; beechwood

Volume 51 (2000), Issue 1

Influence of veneer moisture content on shear strength of plywood adhesive bond

Authors:

Jože Resnik, Milan Šernek

Keywords:

peeled beech veneer; melamine-urea-formaldehyde adhesive; hot gluing; gluebond shear strength

Volume 50 (1999), Issue 2

Natural resins

Authors:

Ivan Božičko, Vesna Tišler, Vladimir Sertić

Keywords:

resin; coats; reparation

Volume 49 (1998), Issue 1

Correlation between physical properties of V 20 particle boards made with different kinds and quantities of hydrophobic additives

Authors:

Vladimir Jambreković, Mladen Brezović, Vladimir Bruči

Keywords:

swelling; water adsorption; density; paraffin emulsion; V 20 type particle boards; carbamide-formaldehyde resins

Volume 48 (1997), Issue 1

Effect of Resin and Wax on Mechanical and Physical Properties of Hardboard From Air-Laid Mats

Authors:

James H. Muehl, Andrzej M. Krzysik

Keywords:

wood fiber; polyester fiber; composites; dry-process; harboard; phenolic resin; wax; dimensional stability; mechanical properties; physical properties

Volume 47 (1996), Issue 4

Influence of interaction of urea-formaldehyde resin and paraffin emulsion on the quality of particle boards

Authors:

Vladimir Jambreković

Keywords:

particle boards; urea-formaldehyde (UF) resin; F: U mol ratio; paraffin emulsion; physical properties; mechanical properties; formaldehyde quantity

Volume 44 (1993), Issue 3

Determination of the quantity of the formaldehyde release of plywood by different methods

Authors:

Božidar Lapaine, Vladimir Jambreković

Keywords:

Volume 43 (1992), Issue 3

Relation between emission formaldehyd value from MDF-boards determinated by perforation and diffusion method

Authors:

Đurđica Trninić, Vladimir Jambreković, Damir Žuntar

Keywords:

MDF-boards E 1 class; free formaldehyde emission; perforator and WKI-24 method

Volume 41 (1990), Issue 5-6

Application of lignosulfonates combined with various urea-formaldehyde resins

Authors:

L. Suša, D. Budin, F. Hvala

Keywords:

lignosulfonates; urea-formaldehyde resins; adhesives; particle boards; mechanical properties

Volume 40 (1989), Issue 9-10

Formaldehyde liberation during the manufacture and storage of composition materials

Authors:

Jadranko Jahić, Vladimir Bruči

Keywords:

free formaldehyde; reduced formaldehyde emission; formaldehyde source interaction

Volume 40 (1989), Issue 1-2

Technological properties of urea bonded resins important for particleboard production

Authors:

Vladimir Bruči, Marina Tatalović

Keywords:

application of glue by spraying method; size of glue drops; glue consumption; glue application

Volume 39 (1988), Issue 9-10

The comparison of shear strength of glued joint made by urea-formaldehyde and some mineral adhesives

Authors:

Milanka Điporović, Jovan Miljković

Keywords:

Volume 39 (1988), Issue 3-4

Cognitions on determination of air contamination degree by formaldehyde

Authors:

Salah-Eldien Omer

Keywords:

position of regulations linked to formaldehyde; The Hoetjer's equation; chamber for determination of formaldehyde emission

Volume 38 (1987), Issue 5-6

Product improvement with regards to the amount of formaldehyde subsequently emitted

Authors:

Vladimir Bruči, Mladen Komac, Marina Tatalović, Jadranko Jahić

Keywords:

formaldehyde emission; formaldehyde concentration; molar ration

Volume 37 (1986), Issue 11-12

Emission dynamics of formaldehyde from chipboard determined by perforation and diffusion method

Authors:

Vladimir Bruči, Vladimir Sertić, Ivo Opačić

Keywords:

emission dynamics of formaldehyde; perforation method; diffusion method

Volume 37 (1986), Issue 3-4

Some possibilities of manufacturing fireproof plywood

Authors:

Stjepan Petrović, Josip Klekar

Keywords:

fireproof plywood; structural protection; phenol-formaldehyde glue

Volume 37 (1986), Issue 5-6

Emission of formaldehyde from unimproved and improved particle boards

Authors:

Mladen Komac, Marina Tatalović, Vladimir Bruči

Keywords:

free formaldehyde; emission classes; perforation method; diffusion method

Volume 36 (1985), Issue 3-4

Surface improvement of particleboards by quick pressing

Authors:

Mladen Barberić

Keywords:

particleboards; paper impregnated with synthetic resin; surface improvement; rapid method

Volume 36 (1985), Issue 11-12

Research into the possibility of the production of glue-laminated electro-conducting poles

Authors:

Stjepan Petrović, Slavko Kovačević, Salah-Eldien Omer, Ilija Stjepčević

Keywords:

glue laminated wooden poles; resorcin-phenol-formaldehyde glue

Volume 35 (1984), Issue 3-4

Activation energy of curing of furfuryl alcohol resin in the presence of wood

Authors:

Jovan Miljković

Keywords:

Volume 34 (1983), Issue 11-12

Free formaldehyd in production of wood based panel products

Authors:

Salah-Eldien Omer

Keywords:

free formaldehyde; method for determining the liberated formaldehyde; technical method for reduced emission of formaldehyde

Volume 33 (1982), Issue 5-6

Formaldehyde emission from particleboards as a problem of air contamination

Authors:

Jože Lenič, Vesna Tišler

Keywords:

formaldehyde released from particleboard; concentration of formaldehyde

Volume 32 (1981), Issue 9-10

Influence of resin distribution over chips on quality and manufacture of particle boards

Authors:

Salah-Eldien Omer

Keywords:

resin bonding of particles; spreading of resin on chips; probability of resin drstribution

Volume 30 (1979), Issue 7-8

Decorative plastic laminates for postforming manufactured by acetoguanamine additive

Authors:

Jože Lenič, Josef Seeholzer

Keywords:

plastic laminates for postforming; production of round-edged furniture; properties of impregnation and flowing of resins; plastic laminated properties

The Effect of Type of Reinforcement, Type of Glue and Reinforcement Place on Mechanical and Physical Properties of LVL

Evaluation of Some Physico-Mechanical Properties and Formaldehyde Emission of Ecological Chipboards Produced from Annual Residue Plant Stems

Improving Surface Quality of Resin Impregnated Paper Used for Laminated Flooring Overlaid

Optimization of Production Parameters of Densified Laminated Veneer Lumber Produced by Using Urea-Formaldehyde Resin

Effect of Epoxy Resin Reinforcement on Screw Withdrawal Strength of Fiberboard and Particleboard Used in Furniture Industry

Synthesis of Phenolic Resin Reinforced with TiO2 Nanoparticles and its Effect on Combustion Performance of Laminated Veneer Lumber (LVL)

Potential Use of Olive Stone Residues in Particleboard Production

Effects of Silane Treatment on Physical and Mechanical Properties of Particleboards Prepared with Urea Formaldehyde

Optimization for Green Path in Wood Extractives by Taguchi Analysis

Characterization of Formaldehyde Emission and Combustion Properties of Peanut (Arachis Hypogaea) Husk-Based Green Composite Panels for Building Applications

Effect of Using Urea Formaldehyde Modified with Extracts in Plywood on Formaldehyde Emission

Possibility of Use of NCC Reinforced Melamine-Urea-Formaldehyde Adhesive in Plywood Manufacturing

Adhesivity of Bio-Based Anhydrous Citric Acid, Tannin-Citric Acid and Ricinoleic Acid in the Properties of Formaldehyde-Free Medium Density Particleboard (MDP)

Synthesis of Bio-Oilphenol-Formaldehyde Resins under Alkali Conditions: Physical, Chemical and Thermal Properties of Resins and Bonding Performance

Experimental Study on Combustion Properties and Thermo-Gravimetric Analyses of Oriented Strand Board (OSB)

Properties of Plywood Produced with Urea-Formaldehyde Adhesive Modified with Nanocellulose and Microcellulose

An in Vitro Study on Antifungal Properties, Total Polyphenolic Content and Antioxidant Activity of Different Parts of Selected Fruit Trees

Effect of Natural Resin from Wild Pistachio Trees on Physical Properties and Durability of Beech Wood: Alone and in Combination with Boric Acid

Mechanical Properties and Free Formaldehyde Content of Particleboards Produced using Ammonium Sulphate-Based Hardener Partially Replaced with Tartaric Acid

Effects of Nano-Clay on Physical and Mechanical Properties of Medium-Density Fiberboards Made from Wood and Chicken-Feather Fibers and Two Types of Resins

Screw Withdrawal Resistance and Surface Soundness of Three-Layer Fiberboard Having Coarse Fibers in Core Layer

Supplementation of Natural Tannins as an Alternative to Formaldehyde in Urea and Melamine Formaldehyde Resins used in MDF Production

Effect of Extraction Technique on Composition of Volatile Constituents of Oleoresin from Pinus Brutia Ten.

The Impact of Nanoparticles and Moisture Content on Bonding Strength of Urea Formaldehyde Resin Adhesive

Mechanical Properties and Formaldehyde Release of Boards Manufactured with Hygrothermally Treated Tepa (Laureliopsis Philippiana Looser) Particles

Formaldehyde Release from Plywood Manufactured with Two Types of Urea Formaldehyde Resins after Fire Retardant Treatment of Veneers

Measuring the Formaldehyde Content from Different Types of Oriented Strand Board Manufactured with Different Thicknesses and Glued with Different Resins

Wood Waste Turned Into Value Added Products: Thermal Plasticization by Benzylation Process

Resin Content and Board Density Dependent Mechanical Properties of One-Layer Particleboard Made from Willow (Salix viminalis)

Review on Lipophilic and Hydrophilic Extractives in Tissues of Common Beech

Chemical Composition of Oleoresin and Larvae Gallery Resin of Pinus Brutia Attacked by Dioryc tria Sylvestrella Ratz.

Influence of Adhesive Type on the Properties of LVL Made from Paricá (Schizolobium amazonicum Huber ex. Ducke) Plantation Trees

Properties of Modified Phenol-Formaldehyde Adhesive for Plywood Panels Manufactured from High Moisture Content Veneer

Properties of Liquid and Polycondensed UF Resin Modified with pMDI

Content of Total Phenols in Red Heart and Wound-Associated Wood in Beech (Fagus sylvatica L.)

Influence of the Addition of Urea-Formaldehyde Adhesive to Liquefied Wood on Curing

Evaluation of Mechanical Properties and Formaldehyde Emission of Plywood Manufactured for Construction Applications

Formaldehyde Emission from Wood-Based Panels Bonded with Different Formaldehyde-Based Resins

Impact of Resin Content on Swelling Pressure of Three Layer Perticleboard Bonded with Urea-Formaldehyde Adhesive

Influence of Urea-Formaldehyde Resin Modification with Liquefied Wood on Particleboard Properties

UF-pMDI Hybrid Resin for Waterproof Particleboards Manufactured at a Shortened Pressing Time

Influence of carbon fibers on some relevant properties of veneer plywood

Effect of duration of storage of MUF resin on the wetting angle on beechwood

Influence of veneer moisture content on shear strength of plywood adhesive bond

Natural resins

Correlation between physical properties of V 20 particle boards made with different kinds and quantities of hydrophobic additives

Effect of Resin and Wax on Mechanical and Physical Properties of Hardboard From Air-Laid Mats

Influence of interaction of urea-formaldehyde resin and paraffin emulsion on the quality of particle boards

Determination of the quantity of the formaldehyde release of plywood by different methods

Relation between emission formaldehyd value from MDF-boards determinated by perforation and diffusion method

Application of lignosulfonates combined with various urea-formaldehyde resins

Formaldehyde liberation during the manufacture and storage of composition materials

Technological properties of urea bonded resins important for particleboard production

The comparison of shear strength of glued joint made by urea-formaldehyde and some mineral adhesives

Cognitions on determination of air contamination degree by formaldehyde

Product improvement with regards to the amount of formaldehyde subsequently emitted

Emission dynamics of formaldehyde from chipboard determined by perforation and diffusion method

Some possibilities of manufacturing fireproof plywood

Emission of formaldehyde from unimproved and improved particle boards

Surface improvement of particleboards by quick pressing

Research into the possibility of the production of glue-laminated electro-conducting poles

Activation energy of curing of furfuryl alcohol resin in the presence of wood

Free formaldehyd in production of wood based panel products

Formaldehyde emission from particleboards as a problem of air contamination

Influence of resin distribution over chips on quality and manufacture of particle boards

Decorative plastic laminates for postforming manufactured by acetoguanamine additive

Publisher