Archive

Volume 74 (2023), Issue 1

Synthesis of Phenolic Resin Reinforced with TiO2 Nanoparticles and its Effect on Combustion Performance of Laminated Veneer Lumber (LVL)

Authors:

Günay Özbay, Musa Atar, Ayhan Ozcifci

Keywords:

adhesive; combustion; FT-IR; nano-chemicals; TiO2 nanoparticles

Volume 74 (2023), Issue 3

Prediction of Optimum Veneer Drying Parameters with Artifi cial Neural Networks for Production of Plywood with High Mechanical Properties

Authors:

Hasan Ozturk

Keywords:

veneer drying temperature; moisture content; thermal conductivity; artificial neural network; plywood

Volume 74 (2023), Issue 3

Optimization of Production Parameters of Densified Laminated Veneer Lumber Produced by Using Urea-Formaldehyde Resin

Authors:

Saadettin Murat Onat, Serkan Özdemir

Keywords:

densification; laminated veneer lumber; urea formaldehyde; processing parameters; Taguchi method based grey relational analysis

Volume 73 (2022), Issue 1

Reinforcement of Joints Between LVL Members with GFRP and Finite Element Analysis

Authors:

Mosayeb Dalvand, Ghanbar Ebrahimi, Kambiz Pourtahmasi

Keywords:

veneer lumber; glass fiber reinforced polymer; finite element method; failure modes

Volume 73 (2022), Issue 2

Surface Roughness of Sliced Veneers in Terms of Defects and Wood Structure Variability – Impact of Mild Hydrothermal Treatment

Authors:

Vasiliki Kamperidou, Efstratios Aidinidis, Ioannis Barboutis

Keywords:

knot, modification, quality, surface property, texture, veneer

Volume 72 (2021), Issue 1

An Assessment of Environmental Impact on Glued Wood Building Elements

Authors:

Darius Albrektas, Ernestas Ivanauskas

Keywords:

glued wood (glulam); laminated veneer lumber; modulus of elasticity; coeffi cient of damping; wood defects

Volume 70 (2019), Issue 4

Effect of Veneer Drying Process on Some Technological Properties of Polystyrene Composite Plywood Panels

Authors:

Hasan Ozturk, Aydin Demir, Cenk Demirkir, Gursel Colakoglu

Keywords:

polystyrene composite plywood (PCP); veneer drying; mechanical properties; styrofoam

Volume 70 (2019), Issue 4

Influence of Layered Structure of Composite Timber Floor Boards on Their Hardness

Authors:

Piotr Borysiuk, Izabela Burawska-Kupniewska, Radosław Auriga, Grzegorz Kowaluk, Paweł Kozakiewicz, Marcin Zbieć

Keywords:

veneer; composite; flooring material; knotholes; hardness

Volume 70 (2019), Issue 3

Polyglycerol- and Sucrosebased Green Polyurethane Adhesives for Veneering

Authors:

Mariusz L. Mamiński, Anna Romanowska

Keywords:

polyglycerol; polyol; polyurethane; sucrose; veneering

Volume 70 (2019), Issue 1

Investigation of Friction Coefficients of Veneers as a Function of Fibre Direction and Moisture Content

Authors:

Beate Buchelt, André Wagenführ

Keywords:

veneer; friction; friction coefficients; wood moulded parts

Volume 70 (2019), Issue 1

Analytical Analysis of Distribution of Bending Stresses in Layers of Plywood with Numerical Verification

Authors:

Andrzej Makowski

Keywords:

plywood; stress distribution; veneers; layers; FEM; numerical analysis

Volume 69 (2018), Issue 4

Evaluation of Dynamic Contact Angle of Loose and Tight Sides of Thermally Compressed Birch Veneer

Authors:

Pavlo Bekhta, Tomasz Krystofiak, Stanislaw Proszyk, Barbara Lis

Keywords:

birch veneer; thermal compression; loose and tight sides; wettability; dynamic contact angle

Volume 69 (2018), Issue 2

Formaldehyde Release from Plywood Manufactured with Two Types of Urea Formaldehyde Resins after Fire Retardant Treatment of Veneers

Authors:

Aydin Demir, Ismail Aydin, Hasan Ozturk

Keywords:

formaldehyde release; plywood; veneer; fire retardant; urea formaldehyde

Volume 69 (2018), Issue 1

Method of Estimation of Laminated Wood Properties

Authors:

Mladen Brezović, Stjepan Pervan, Josipa Petrak, Silvana Prekrat

Keywords:

veneer plywood; bending strength; modulus of elasticity; thickness of veneer plate; property estimation

Volume 68 (2017), Issue 3

Use of 8D Method in Nonconformity Resolution – a Case Study of Production of Spliced Veeners in Slovakia

Authors:

Renata Nováková, Jana Šujanová, Alena Pauliková

Keywords:

improvement instruments; production of spliced veneers; TQM; 8D method

Volume 68 (2017), Issue 2

Impact of Veneer Layouts on Plywood Tensile Strength

Authors:

Violeta Jakimovska Popovska, Borche Iliev, Goran Zlateski

Keywords:

plywood; veneers; tensile strength; changes; position; layers

Volume 67 (2016), Issue 2

Effects of Different Kinds of Coating Materials on Properties of Flat Pressed WPC Panels

Authors:

Pavlo Bekhta, Pavlo Lyutyy, Galyna Ortynska

Keywords:

coating materials; flat pressing; recycled polyethylene; veneer; wood plastic composites

Volume 65 (2014), Issue 4

Properties of Modified Phenol-Formaldehyde Adhesive for Plywood Panels Manufactured from High Moisture Content Veneer

Authors:

Pavlo Bekhta, Galyna Ortynska, Jan Sedliacik

Keywords:

gluing; veneer; high moisture content; plywood; phenol-formaldehyde resin; modifying agents

Volume 65 (2014), Issue 2

Effectiveness of Asymmetrical Veneering with Hardwood Species of Varying Shrinkage and Porosity

Authors:

Sylwia Olenska, Pawel Tarcicki, Mariusz L. Mamiński, Piotr Beer

Keywords:

asymmetrical veneering; wood-based panels; deformations; shrinkage; porosity

Volume 64 (2013), Issue 3

Dimensional Stability of Plywood Panels Made from Thermally Modified Poplar Veneers in the Conditions of Variable Air Humidity

Authors:

Vladislav Zdravković, Aleksandar Lovrić, Bojana Stanković

Keywords:

thermal modification; poplar veneer; plywood panels; dimensional stability; ASE

Volume 64 (2013), Issue 3

Shape Stability of Particleboards Covered with Decorative Veneers

Authors:

Pavel Král, Jaroslav Hrázský, Lenka Hrapková, Petr Hamšík

Keywords:

veneer; veneering; panels; warping; shape stability

Volume 64 (2013), Issue 1

Influence of Gluing Technology on Physical and Mechanical Properties of Laminated Veneer Lumber

Authors:

Murčo Obućina, Goran Turk, Ejub Džaferović, Jože Resnik

Keywords:

laminated veneer lumber; hot gluing; high frequency gluing; physical properties; mechanical properties

Volume 63 (2012), Issue 1

Investigations of the Compressive Behaviour of Veneer in Thickness Direction

Authors:

Beate Buchelt, Alexander Pfriem, André Wagenführ

Keywords:

compression test; deformation; light microscope; stress-strain curve; veneer

Volume 61 (2010), Issue 4

Influence of Synthetic Fibers Angle Orientation on Bending Properties of Composite Plywood

Authors:

Mladen Brezović, Jaroslav Kljak, Stjepan Pervan, Alan Antonović

Keywords:

veneer; carbon fibers; angle of orientation; plywood; bending properties

Volume 61 (2010), Issue 3

Veneer Densification as a Tool for Shortening of Plywood Pressing Time

Authors:

Agnieszka Kurowska, Piotr Borysiuk, Mariusz L. Mamiński, Marcin Zbieć

Keywords:

plywood; veneer densification; pressing time; shear strengths

Volume 60 (2009), Issue 2

Influence of plywood grain direction on sandwich panel bending properties

Authors:

Jaroslav Kljak, Mladen Brezović, Alan Antonović

Keywords:

sandwich panel; veneer plywood; stress; FEM; structural construction

Volume 57 (2006), Issue 1

Assessing the effects of thickness of beech veneers on compressibility of plywoods

Authors:

Pavel Král

Keywords:

plywood; density of plywood; beech veneer; compressibility; shrinking

Volume 53 (2002), Issue 1

Influence of carbon fibers on some relevant properties of veneer plywood

Authors:

Mladen Brezović, Vladimir Jambreković, Jaroslav Kljak

Keywords:

veneer plywood; carbon fibres; mechanical properties; resorcine phenol formaldehyde adhesive

Volume 53 (2002), Issue 3

Variable elements of plywood water resistance

Authors:

Jaroslav Kljak, Mladen Brezović, Vladimir Jambreković

Keywords:

veneer plywood; bonding quality; water resistance

Volume 51 (2000), Issue 1

Influence of veneer moisture content on shear strength of plywood adhesive bond

Authors:

Jože Resnik, Milan Šernek

Keywords:

peeled beech veneer; melamine-urea-formaldehyde adhesive; hot gluing; gluebond shear strength

Volume 51 (2000), Issue 1

A Yield of American Walnut in Sliced Veneer Production

Authors:

Vladimir Bruči, Aida Kopljar, Vladimir Jambreković

Keywords:

sliced veneer; veneer flitches; hydrothermic treatment; a share of bark; veneer thickness; veneer drying; yield of American walnut

Volume 47 (1996), Issue 2

Processing of Bog-oak (Ouercus robur, Erch) into Fine Veneer

Authors:

Franjo Penzar, Hrvoje Matušić

Keywords:

fossil oak (bog wood); the production of precious venner; the physical and mechanical properties of veneer

Volume 42 (1991), Issue 1-2

Use of personal computer support in production of veneer

Authors:

Milorad Tomić

Keywords:

information subsystem; use of personal computer; special hardware configuration

Volume 41 (1990), Issue 9-10

Research on change of fire resistance of steel galvanized metal sheet doors after being veneered on both surfaces

Authors:

Mirko Gornik

Keywords:

fire resistance; veneer paneling; glued joints

Volume 41 (1990), Issue 9-10

Edge bending small machines

Authors:

Stjepan Tkalec

Keywords:

edge banding machine; gluing of edge strips and veneer; capacity and flexibility, technology of edge lining

Volume 41 (1990), Issue 1-2

Research in adhesion performance of permanent elastic joints of galvanized sheets and veneers in course of time

Authors:

Mirko Gornik

Keywords:

veneering of galvanized sheets; joint adhesion; permanent high-elastic joints

Volume 40 (1989), Issue 7-8

Producing veneer of oak (quercus robur erch) by pyramidal cutting

Authors:

Franjo Penzar

Keywords:

oak wood; pyramidal cut; cutting with standard equipment; peeling-machine.

Volume 39 (1988), Issue 3-4

Forestry and timber industry in Yugoslavia in 1987

Authors:

Dušan Oreščanin

Keywords:

exports and imports of timber; products of forest utilization; primary processing of wood; veneers and wood-based panels; finished wood products

Volume 39 (1988), Issue 3-4

Production of Locust veneer (Robinia Pseudoacacia L.)

Authors:

Franjo Penzar

Keywords:

Black Locust; hydrothermal preparation; sliced veneer; surface finishing

Volume 35 (1984), Issue 5-6

Removal of oxidation stains from the veneer surface

Authors:

Marijan Ivančić

Keywords:

oxidation stains on veneer; removal of stains from veneer

Volume 31 (1980), Issue 1-2

Timber market in 1979 and prospects for 1980

Authors:

Dušan Oreščanin

Keywords:

world market of wood products; demands and prices of logs, sawnwoods, pulpwood, veneer and board; foreseeing of wood products demand in 1980

Volume 31 (1980), Issue 7-8

Gluing time of veneers as function of the temperature change intensity in the joints

Authors:

Murat Backović

Keywords:

time of glue hardening; chemical and physical changes in joints; time of the loss of capacity of glue hardening; temperature flow in the joints; intensity of temperature changes in the joints; coefficient of temperature conductivity

Volume 30 (1979), Issue 7-8

Contribution to investigation of voluminal and qualitative utilization of oak veneer logs dependent on thickness grade and provenience

Authors:

Ilija Stjepčević

Keywords:

voluminal and qualitative utilization of veneer logs; production of cut veneer; thickness grade and provenience of logs

Volume 30 (1979), Issue 4

Wood products market in 1978 and prospects for 1979

Authors:

Dušan Oreščanin

Keywords:

international wood products market in 1978; demand and prices of logs, sawngoods, veneers and boards; estimated demand in wooden products for 1979

Volume 28 (1977), Issue 9-10

Rationalization of veneer consumption in furniture manufacture

Authors:

Rudolf Truc

Keywords:

veneer utilization in furniture manufacture; veneer preparation; veneer splicing

Volume 27 (1976), Issue 9-10

Kibernetic system management in veneered furniture production

Authors:

Zdravko Fučkar

Keywords:

information system and management; stock situation information; feed back circuits; block diagram

Volume 27 (1976), Issue 11-12

Contribution to veneer feeling theory

Authors:

Mojsije Vučeljić

Keywords:

veneer peeling; veneer peeling lathe; veneer quality

Synthesis of Phenolic Resin Reinforced with TiO2 Nanoparticles and its Effect on Combustion Performance of Laminated Veneer Lumber (LVL)

Prediction of Optimum Veneer Drying Parameters with Artifi cial Neural Networks for Production of Plywood with High Mechanical Properties

Optimization of Production Parameters of Densified Laminated Veneer Lumber Produced by Using Urea-Formaldehyde Resin

Reinforcement of Joints Between LVL Members with GFRP and Finite Element Analysis

Surface Roughness of Sliced Veneers in Terms of Defects and Wood Structure Variability – Impact of Mild Hydrothermal Treatment

An Assessment of Environmental Impact on Glued Wood Building Elements

Effect of Veneer Drying Process on Some Technological Properties of Polystyrene Composite Plywood Panels

Influence of Layered Structure of Composite Timber Floor Boards on Their Hardness

Polyglycerol- and Sucrosebased Green Polyurethane Adhesives for Veneering

Investigation of Friction Coefficients of Veneers as a Function of Fibre Direction and Moisture Content

Analytical Analysis of Distribution of Bending Stresses in Layers of Plywood with Numerical Verification

Evaluation of Dynamic Contact Angle of Loose and Tight Sides of Thermally Compressed Birch Veneer

Formaldehyde Release from Plywood Manufactured with Two Types of Urea Formaldehyde Resins after Fire Retardant Treatment of Veneers

Method of Estimation of Laminated Wood Properties

Use of 8D Method in Nonconformity Resolution – a Case Study of Production of Spliced Veeners in Slovakia

Impact of Veneer Layouts on Plywood Tensile Strength

Effects of Different Kinds of Coating Materials on Properties of Flat Pressed WPC Panels

Properties of Modified Phenol-Formaldehyde Adhesive for Plywood Panels Manufactured from High Moisture Content Veneer

Effectiveness of Asymmetrical Veneering with Hardwood Species of Varying Shrinkage and Porosity

Dimensional Stability of Plywood Panels Made from Thermally Modified Poplar Veneers in the Conditions of Variable Air Humidity

Shape Stability of Particleboards Covered with Decorative Veneers

Influence of Gluing Technology on Physical and Mechanical Properties of Laminated Veneer Lumber

Investigations of the Compressive Behaviour of Veneer in Thickness Direction

Influence of Synthetic Fibers Angle Orientation on Bending Properties of Composite Plywood

Veneer Densification as a Tool for Shortening of Plywood Pressing Time

Influence of plywood grain direction on sandwich panel bending properties

Assessing the effects of thickness of beech veneers on compressibility of plywoods

Influence of carbon fibers on some relevant properties of veneer plywood

Variable elements of plywood water resistance

Influence of veneer moisture content on shear strength of plywood adhesive bond

A Yield of American Walnut in Sliced Veneer Production

Processing of Bog-oak (Ouercus robur, Erch) into Fine Veneer

Use of personal computer support in production of veneer

Research on change of fire resistance of steel galvanized metal sheet doors after being veneered on both surfaces

Edge bending small machines

Research in adhesion performance of permanent elastic joints of galvanized sheets and veneers in course of time

Producing veneer of oak (quercus robur erch) by pyramidal cutting

Forestry and timber industry in Yugoslavia in 1987

Production of Locust veneer (Robinia Pseudoacacia L.)

Removal of oxidation stains from the veneer surface

Timber market in 1979 and prospects for 1980

Gluing time of veneers as function of the temperature change intensity in the joints

Contribution to investigation of voluminal and qualitative utilization of oak veneer logs dependent on thickness grade and provenience

Wood products market in 1978 and prospects for 1979

Rationalization of veneer consumption in furniture manufacture

Kibernetic system management in veneered furniture production

Contribution to veneer feeling theory

Publisher