Archive

Volume 75 (2024), Issue 1

Volume 75 (2024), Issue 2

Effects of Ultrasound-Assisted Varnish and Component Mixing Method on Mechanical and Physical Properties of Varnish Layer

Authors:

Emirhan Akdemir, Osman Goktas, Mehmet Yeniocak, Mehmet Colak

Keywords:

ultrasound stirring; adhesion strength; roughness; glossiness; varnish

Volume 75 (2024), Issue 2

The Effect of Type of Reinforcement, Type of Glue and Reinforcement Place on Mechanical and Physical Properties of LVL

Authors:

İlkay Atar, Fatih Mengeloğlu

Keywords:

reinforced LVL; glass fiber; basalt; epoxy; phenol formaldehyde

Volume 75 (2024), Issue 3

Effects of DES and Chlorite Delignification Methods on Properties of Transparent Wood Materials

Authors:

Eser Sozen, Deniz Aydemir, Gokhan Gunduz, Sezgin Koray Gülsoy

Keywords:

deep eutectic solvent; delignification; transparent wood; beech wood

Volume 74 (2023), Issue 1

Effects of Medium Density Fiberboards (MDF) Recycling Methods on Fiber Dimensions and Some Reconstructed Board Properties

Authors:

Çagri Olgun, Saim Ateş, Emre Uzer

Keywords:

waste MDF; recycling; recycled fibers; fiber properties; board strenght

Volume 74 (2023), Issue 4

Effect of Epoxy Resin Reinforcement on Screw Withdrawal Strength of Fiberboard and Particleboard Used in Furniture Industry

Authors:

Mesut Uysal, Cagatay Tasdemir, Memis Dogan

Keywords:

epoxy resin; reinforcement; screw withdrawal strength; medium density fiberboard; particleboard

Volume 74 (2023), Issue 3

Analysis of the Effect of Gypsum-Based Fire Protection Cover on Charring of Wooden Bearing Elements

Authors:

Marie Rusinová, Miloš Lavický, Miloš Kalousek, Martin Sedlmajer

Keywords:

fire resistance; ignition temperature; gypsum plasterboard; gypsum fibreboard; fire test

Volume 74 (2023), Issue 1

Synthesis of Phenolic Resin Reinforced with TiO2 Nanoparticles and its Effect on Combustion Performance of Laminated Veneer Lumber (LVL)

Authors:

Günay Özbay, Musa Atar, Ayhan Ozcifci

Keywords:

adhesive; combustion; FT-IR; nano-chemicals; TiO2 nanoparticles

Volume 74 (2023), Issue 4

The Effect of Hot and Cold Check Tests on Surface Roughness and Glossiness in Varnished Wood Material

Authors:

Abdi Atilgan, Sait Dündar Sofuoğlu

Keywords:

wood material; varnish; surface roughness; glossiness; hot and cold-check test

Volume 73 (2022), Issue 3

Starch Impregnation Effect of Testliner Paper on Stiffness of Honeycomb Panels with Slender Cells

Authors:

Jerzy Smardzewski, Michał Słonina

Keywords:

honeycomb; hexagonal cell; orthotropy; impregnation; elastic properties; strength

Volume 73 (2022), Issue 4

Effects of CNC Processing Parameters on Surface Quality of Wood-Based Panels Used in Furniture Industry

Authors:

Aydin Demir, Evren Osman Cakiroglu, Ismail Aydin

Keywords:

wood-based panel; CNC milling machine; surface roughness; processing parameters

Volume 73 (2022), Issue 4

Effects of Exposure Time and Temperature on Screw Driving Torques in Heat-Treated Anatolian Black Pine and Sessile Oak Wood

Authors:

Mehmet Karamanoglu, Önder Tor

Keywords:

screw; pilot hole; seating torque; heat-treated wood

Volume 73 (2022), Issue 1

The Effect of Sheathing Material on Racking Performance of Plywood Shear Wall

Authors:

Cenk Demirkir, Aydin Demir, Hasan Ozturk, Ismail Aydin

Keywords:

shear wall; structural plywood; racking performance; fibre direction

Volume 73 (2022), Issue 4

Effects of Silane Treatment on Physical and Mechanical Properties of Particleboards Prepared with Urea Formaldehyde

Authors:

Saadettin Murat Onat, Orhan Kelleci

Keywords:

silane; particleboard; physical and mechanical properties

Volume 73 (2022), Issue 1

Effect of Acetylation and Accelerated Weathering of Nigerian Grown Rubberwood (Hevea brasiliensis, Müll. Arg.) on Equilibrium Moisture Content and Colour Change

Authors:

Samuel Oluyinka Olaniran

Keywords:

rubberwood; equilibrium moisture content; moisture ratio; acetylation; accelerated weathering

Volume 73 (2022), Issue 2

Effects of Wooden Dowel Species, Edge Banding Thickness, and Adhesive Types on Embedded Strength in Particleboard

Authors:

Abdurrahman Karaman

Keywords:

PUR-D4, PVC edge banding, embedded strength of dowel, particleboard, dowel

Volume 72 (2021), Issue 2

Effect of Soaking/Oven- Drying on Mechanical and Physical Properties of Birch (Betula spp.) Plywood

Authors:

Regino Kask, Harri Lille, Mihkel Kiviste

Keywords:

plywood; bending strength; modulus of elasticity; thickness swelling; restore dimensions; moisture content; X-Ray technique

Volume 72 (2021), Issue 3

Effect of Using Urea Formaldehyde Modified with Extracts in Plywood on Formaldehyde Emission

Authors:

Ugur Bilgin, Gursel Colakoglu

Keywords:

formaldehyde emission; plywood; elm bark; hazelnut husk; tannin; urea formaldehyde

Volume 72 (2021), Issue 3

The Effect of Artificial Weathering on Surface Properties of Thermally Modified Oriental Beech Wood

Authors:

Turkay Turkoglu, Hilmi Toker, Ergun Baysal, Ahmet Gunduz, Caglar Altay, Mustafa Kucuktuvek, Huseyin Peker

Keywords:

thermal modification; Oriental beech wood; color; surface roughness; artificial weathering; construction materials

Volume 72 (2021), Issue 3

Investigation of the Effect of Using Activated Sludge Treated with Acetic Acid on Physical and Strength Properties of Recycled Pulp

Authors:

Naghmeh Amani, Ramin Vaysi, Abdollah Najafi, Seyed Eshagh Ebadi

Keywords:

activated sludge; acetic acid; newsprint paper; eco-friendly bio composite; resistance features

Volume 72 (2021), Issue 4

Effect of Artificial Ageing on Adhesive Bonds from Heat Treated Spruce

Authors:

Mirko Kariž, Manja Kitek-Kuzman, Milan Šernek

Keywords:

heat treated spruce; adhesive bond; artificial ageing; shear strength; delamination; colour change

Volume 72 (2021), Issue 1

The Effect of Using Pumice Powder and Plasticizer on Physico-Mechanical and Thermal Properties of Cement-Bonded Particleboards

Authors:

Uğur Aras, Hulya Kalaycioglu, Husnu Yel

Keywords:

cement-bonded particleboard (CBPBs); pumice; plasticizer; physical and mechanical properties; thermal conductivity

Volume 72 (2021), Issue 1

The Effects of Slicing Parameters on Surface Quality of European Beech Wood

Authors:

Agnieszka Jankowska, Paweł Kozakiewicz, Marcin Zbieć

Keywords:

contact angles; wood wettability; European beech; slicing; pressure bar set

Volume 71 (2020), Issue 4

Effects of Recycled Fiber Fines on Hand Sheet Properties of Different Unbeaten and Beaten Pulps

Authors:

Sezgin Koray Gülsoy, Saffet Uysal

Keywords:

Populus tremula L.; Pinus brutia Ten.; recycled fiber; kraft; fines; pulp and paper properties

Volume 71 (2020), Issue 4

Effect of Natural Resin from Wild Pistachio Trees on Physical Properties and Durability of Beech Wood: Alone and in Combination with Boric Acid

Authors:

Soheila Izadyar, Yaser Babaei, Davood Efhamisisi

Keywords:

pistachio trees; natural resin; weight gain; durability; physical properties

Volume 71 (2020), Issue 3

The Effect of Sapwood and Heartwood Differences on Mechanical Properties of Fast-Growing Tree Species

Authors:

İbrahim Bektaş, Ahmet Tutuş, Gamze Gültekin

Keywords:

mechanical properties; sapwood; heartwood; softwoods; hardwoods

Volume 71 (2020), Issue 1

Effect of Water Repellents on Hygroscopicity and Dimensional Stability of Densified Fir and Aspen Woods

Authors:

Huseyin Pelit, Fatih Emiroglu

Keywords:

densification; dimensional stability; hygroscopicity; impregnation; water repellents

Volume 71 (2020), Issue 1

Hygrothermal Treatment of Tepa (Laureliopsis philippiana Looser) Fibers: Effects on Chemical and Physical Properties

Authors:

Rommel Crespo Gutiérrez, Marco Torres Uribe, Hernán Wilson

Keywords:

hygrothermal treatment; Laureliopsis philippiana; fibers; physical and chemical properties; acidity; fiberboards

Volume 70 (2019), Issue 3

The Effect of Mat Layers Moisture Content on Some Properties of Particleboard

Authors:

Abdullah Istek, Ufuk Aydin, Ismail Ozlusoylu

Keywords:

wood-based panels; particleboard; mat moisture content; properties

Volume 70 (2019), Issue 3

Application of Artificial Neural Network to Predict the Effect of Paraffin Addition on Water Absorption and Thickness Swelling of MDF

Authors:

Ayşenur Gürgen, Derya Ustaömer, Sibel Yildiz

Keywords:

artificial neural network; water absorption; thickness swelling; medium density fiberboard; paraffin

Volume 70 (2019), Issue 3

The Effect of Thermo-Mechanical Treatment of Moso Bamboo (Phyllostachys Pubescens) on Its Sorption and Physicomechanical Properties

Authors:

Przemysław Mania, Jerzy Majka, Magdalena Zborowska

Keywords:

dynamic vapor sorption; equilibrium moisture content; sorption properties; Brinell hardness; GAB model; sorption hysteresis

Volume 70 (2019), Issue 2

Effect of Pine (Pinus Sylvestris) Bark Dust on Particleboard Thickness Swelling and Internal Bond

Authors:

Sergej Medved, Eugenia Mariana Tudor, Marius Catalin Barbu, Vladimir Jambreković, Nikola Španić

Keywords:

bark dust; particleboard; thickness swelling; water absorption; internal bond

Volume 70 (2019), Issue 4

The Effect of Chip Size and Alkaline Pre-Hydrolysis Conditions on Following Soda Pulping of Hornbeam Wood

Authors:

Ahmad Jahan Latibari, Abdulrahim Mohebalian, Ajang Tajdini, Shadman Pourmosua

Keywords:

hemicelluloses; pre-hydrolysis; yield; strength; residual alkali; hornbeam; soda pulping

Volume 70 (2019), Issue 4

Assessment of Efficacy and Effectiveness of Some Extracted Bio-Chemicals as Bio-Fungicides on Wood

Authors:

Mohamed Z. M. Salem, Safa Abd El-Kader Mohamed Hamed, Maisa M. A. Mansour

Keywords:

bio-fungicides; wood; essential oils; extracts; antifungal activity

Volume 70 (2019), Issue 4

Effect of Veneer Drying Process on Some Technological Properties of Polystyrene Composite Plywood Panels

Authors:

Hasan Ozturk, Aydin Demir, Cenk Demirkir, Gursel Colakoglu

Keywords:

polystyrene composite plywood (PCP); veneer drying; mechanical properties; styrofoam

Volume 70 (2019), Issue 4

The Effect of Using Alum Mordant in Wild Cherry Bark Dyestuff for the Production of UV Resistant Colored Paper

Authors:

Ayhan Gençer, Ahmet Can, Aysun Mustak, Ülkü Burcu Gitti

Keywords:

wild cherry bark; chemical-thermomechanical pulp (CTMP); alum; weathering

Volume 70 (2019), Issue 4

Effect of Accelerated Weathering Test on Selected Properties of Bamboo, Scots Pine and Oriental Beech Wood Treated with Waterborne Preservatives

Authors:

Elif Topaloğlu

Keywords:

accelerated weathering; bamboo; mechanical properties; waterborne preservative; wood

Volume 69 (2018), Issue 1

The Effect of Nano TiO2 and Nano Boron Nitride on Mechanical, Morphological and Thermal Properties of WF/PP Composites

Authors:

Eser Sozen, Mustafa Zor, Deniz Aydemir

Keywords:

wood polymer composites; natural fillers; nanoparticle type; characterization analysis

Volume 69 (2018), Issue 1

The Effect of Nanoboron Nitride on Some Properties of Biopolymer Nanocomposites with Cellulose Nanofibrils and Nanoclays

Authors:

Gulyaz Al, Deniz Aydemir, Nadir Ayrilmis, Bulent Kaygin, Gokhan Gunduz

Keywords:

nanoboron nitride; polymer nanocomposites; cellulose nanofibrils; nanoclays; biopolymers

Volume 69 (2018), Issue 1

The Effects of Press Method and Coating Material Differences on the Properties of Medium Density Fiberboard

Authors:

Songül Kayış, İbrahim Bektaş, Ayşenur Kılıç

Keywords:

MDF; wrapping method; membrane method; high gloss PVC; mat PVC

Volume 69 (2018), Issue 4

Effects of Nano-Clay on Physical and Mechanical Properties of Medium-Density Fiberboards Made from Wood and Chicken-Feather Fibers and Two Types of Resins

Authors:

Pantea Omrani, Hamid Reza Taghiyari, Mostafa Zolghadr

Keywords:

feather fibers; mineral materials; nano-composites; clay nanofibers; wood fiber

Volume 69 (2018), Issue 4

Investigation of the Effects of Heat Treatment Applied to Beech Plywood

Authors:

Aurel Lunguleasa, Nadir Ayrilmis, Cosmin Spirchez, Ferhat Özdemir

Keywords:

plywood; heat treatment; mass loss; swelling; Brinell hardness; water absorption

Volume 69 (2018), Issue 3

Effects of Catalysts on Modulus of Rupture and Chemical Structure of Heat – Treated Wood

Authors:

Ayhan Ozcifci, Erkan Sami Kokten, Nadir Ayrilmis, Günay Özbay, Suat Altun

Keywords:

heat treatment; Scotch pine; mechanical strength; catalyst; chemical properties

Volume 69 (2018), Issue 3

Effect of Thermal Treatment on Combustion Process of Spruce Wood (Picea abies)

Authors:

Peter Rantuch, Jozef Martinka, Igor Wachter

Keywords:

torrefaction; Picea abies wood; heat flux; heat release

Volume 69 (2018), Issue 3

Effect of Extraction Technique on Composition of Volatile Constituents of Oleoresin from Pinus Brutia Ten.

Authors:

Samim Yasar, Abdullah Beram, Gurcan Guler

Keywords:

volatile constituents; oleoresin; hydrodistillation; solid phase microextraction (SPME); GC/MS

Volume 69 (2018), Issue 3

Production Management Model in Small and Medium Enterprises in Croatia

Authors:

Marko Dušak, Denis Jelačić

Keywords:

small and medium enterprises; production and business management; block diagram; management model; parameters of effectiveness

Volume 68 (2017), Issue 4

The Effect of Heat Modification and Densification on Physical Properties of Poplar Wood

Authors:

Gonca Düzkale Sözbir, İbrahim Bektaş

Keywords:

poplar wood; densification; heat modification; physical properties

Volume 68 (2017), Issue 4

Determination of the Effect of Liquid Glass (SiO2) on Color Stability of Wood Stained by Natural Dyes

Authors:

Mehmet Yeniocak, Osman Goktas, Sezil Aliyazicioglu, Mehmet Colak, Sevil Yeniocak, Ertan Ozen, Mehmet Ugurlu

Keywords:

Liquid glass; (SiO2); natural plant dyes; wood protection; color stability; cold check

Volume 68 (2017), Issue 3

The Effects of Lignocellulosic Fillers on Mechanical, Morphological and Thermal Properties of Wood Polymer Composites

Authors:

Eser Sozen, Deniz Aydemir, Mustafa Zor

Keywords:

wood polymer composites; natural fillers; filler rate; mechanical properties; morphological characterization; thermal stability

Volume 68 (2017), Issue 3

Effects of Industrial Heat Treatment on Some Physical and Mechanical Properties of Iroko Wood

Authors:

Bilgin Icel, Abdullah Beram

Keywords:

Industrial heat treatment; Iroko; physical and mechanical properties; ThermoWood

Volume 67 (2016), Issue 1

Effect of Press Cycle Time on Application Behavior of Board Made from Chemically Modified Particles

Authors:

Maryam Ghorbani, Fatemeh Bavaneghi

Keywords:

press time; acetylation; particleboard; thickness swelling; mechanical strength; decay resistance

Volume 67 (2016), Issue 1

Effect of Climatic Conditions on Tree-Ring Widths in Black Locust (Robinia pseudoacacia L.) in the city of Wrocław

Authors:

Robert Kalbarczyk, Monika Ziemiańska, Aleksandra Machowska-Molik

Keywords:

dendroclimatology; local chronology; regression analysis; south-western Poland; urban area

Volume 67 (2016), Issue 4

The Effect of Altitude Difference on Physical and Mechanical Properties of Scots Pine Wood Grown in Turkey - Sinop Province

Authors:

Bulent Kaygin, Semih Esnaf, Deniz Aydemir

Keywords:

Scots pine (Pinus sylvestris L.); altitude difference; site; physical properties of wood; mechanical properties of wood

Volume 67 (2016), Issue 3

Surface Roughness and Wettability Variation: The effect of Cutting Distance during Milling of Pinus Radiata Wood

Authors:

Aldo Rolleri, Francisco Burgos, Alfredo Aguilera

Keywords:

cutting distance; roughness; wettability; contact angle; wood; milling

Volume 67 (2016), Issue 2

Effects of Different Kinds of Coating Materials on Properties of Flat Pressed WPC Panels

Authors:

Pavlo Bekhta, Pavlo Lyutyy, Galyna Ortynska

Keywords:

coating materials; flat pressing; recycled polyethylene; veneer; wood plastic composites

Volume 67 (2016), Issue 1

The Effects of Poly(vinyl acetate) Filled with Nanoclay and Cellulose Nanofibrils on Adhesion Strength of Poplar and Scots Pine Wood

Authors:

Deniz Aydemir, Gokhan Gunduz, Nejla Aşık, Alice Wang

Keywords:

Poly(vinyl acetate); cellulose nanofibrils (CNFs); nano clay (NC); nanoparticles filled composites; adhesion

Volume 66 (2015), Issue 4

Effects of Machining Conditions on Surface Roughness in Planing and Sanding of Solid Wood

Authors:

Sait Dündar Sofuoğlu, Ahmet Kurtoğlu

Keywords:

wood; surface roughness; planing; sanding

Volume 66 (2015), Issue 4

Effect of Heat Treatment of Wild Cherry Wood on Abrasion Resistance and Withdrawal Capacity of Screws

Authors:

Ayhan Aytin, Süleyman Korkut, Nusret As, Öner Ünsal, Gokhan Gunduz

Keywords:

Heat treatment; ThermoWood; abrasion resistance; withdrawal capacity of screws; Wild Cherry wood

Volume 66 (2015), Issue 4

Effects of Nanosilver-Impregnation and Heat Treatment on Coating Pulloff Adhesion Strength on Solid Wood

Authors:

Hamid Reza Taghiyari, Amir Samadarpour

Keywords:

coating; nanotechnology; heat treatment; permeability; porous structure; solid wood

Volume 66 (2015), Issue 2

Study on Energy Requirement of Wood Chip Compaction

Authors:

Zoltán Kocsis, Etele Csanády

Keywords:

chip fraction; compaction; pellet diameter; temperature effect; compaction work; dimensionless numbers

Volume 66 (2015), Issue 1

Effect of Refiner Plate Pattern Design on Refined Fibre Size Distribution – a Time Series Study

Authors:

Pavel Král, Petr Klimek, Pawan Kumar Mishra

Keywords:

refining plate pattern; fibre size quality; disc type refiner

Volume 65 (2014), Issue 2

Effectiveness of Asymmetrical Veneering with Hardwood Species of Varying Shrinkage and Porosity

Authors:

Sylwia Olenska, Pawel Tarcicki, Mariusz L. Mamiński, Piotr Beer

Keywords:

asymmetrical veneering; wood-based panels; deformations; shrinkage; porosity

Volume 65 (2014), Issue 4

An Innovative Approach to the Forecasting of Energetic Effects While Wood Sawing

Authors:

Kazimierz A. Orlowski, Tomasz Ochrymiuk, Anthony Atkins

Keywords:

energetic effects; cutting power; wood sawing process; sawing machines; fracture mechanics; fracture toughness

Volume 65 (2014), Issue 4

Effect of Temperature on Radial Growth of Beech and Pine Saplings in the First and Second Year of the Experiment: a Comparison

Authors:

Jožica Gričar

Keywords:

Fagus sylvatica; Pinus sylvestris; xylem increment; juvenile period; temperature

Volume 65 (2014), Issue 3

The Effect of Aging on Various Physical and Mechanical Properties of Scotch Pine Wood Used in Construction of Historical Safranbolu Houses

Authors:

Huseyin Yorur, Seref Kurt, Ibrahim Yumrutas

Keywords:

historical Safranbolu houses; historical wood flooring; cultural heritage; density; Brinell hardness; compression strength perpendicular to the grain

Volume 64 (2013), Issue 4

Effect of Cultivation Methods on Wood Static Bending Properties in Alnus Glutinosa

Authors:

Majid Kiaei

Keywords:

Alnus glutinosa; modulus of elasticity; modulus of rupture; Fiber stress at elastic limit; cultivation methods (natural and plantation forest)

Volume 64 (2013), Issue 3

Effect of Seed Source on Physical Properties of Scots Pine (a Case Study in Neka, Iran)

Authors:

Mohammad Farsi, Majid Kiaei, Shahram Miar, Shirzad Mohammadnezhad Kiasari

Keywords:

seed sources; Scots pine; oven-dry density; basic density; volumetric shrinkage; volumetric swelling

Volume 64 (2013), Issue 3

Effects of Aging of Polyurethane Foams in the Context of Furniture Design

Authors:

Jerzy Smardzewski, Łukasz Matwiej

Keywords:

aging; polyurethane foam; stiffness

Volume 64 (2013), Issue 2

The Dilemma Whether to Produce Glued or Sawn Wooden Beams?

Authors:

Michal Zeman

Keywords:

production of static structural members; trends; production of BSH and KVH; sawn wooden beams; timber costs; wooden structures; cost- effectiveness

Volume 64 (2013), Issue 1

CE Marking of Structural Timber: the European Standardization Framework and its Effects on Italian Manufacturers

Authors:

Francesco Negro, Corrado Cremonini, Roberto Zanuttini

Keywords:

structural timber; normative framework; CE marking; visual grading; machine grading

Volume 63 (2012), Issue 4

The Effect of Residual Swelling after Drying on Internal Bond in OSB

Authors:

Radosław Mirski, Jerzy Majka, Dorota Dziurka

Keywords:

OSB; thickness swelling; internal bond; non-recoverable swelling

Volume 63 (2012), Issue 3

Drying Kinetics of Poplar (Populus Deltoides) Wood Particles by a Convective Thin Layer Dryer

Authors:

Hamid Zarea Hosseinabadi, Kazem Doosthosseini, Mohammad Layeghi

Keywords:

Poplar wood particles; thin layer dryer; drying kinetics model; effective moisture diffusivity; activation energy

Volume 63 (2012), Issue 3

Effect of Hydro- and Hygro-Thermal Treatments on Some Wood Properties of Pinus Radiata and Pseudotsuga Menziesii

Authors:

Francisco Burgos, Aldo Rolleri

Keywords:

heat treatment; extractives; shrinkage; modulus of elasticity

Volume 63 (2012), Issue 2

Determinants of Effects of Foreign Direct Investment in Terms of Slovak Republic and Wood-Processing Industry of Slovakia

Authors:

Martina Merková, Josef Drábek, Denis Jelačić

Keywords:

foreign direct investment (FDI); effects of FDI; business environment; investment incentives; woodprocessing branch

Volume 61 (2010), Issue 3

Effect of Sanding on Surface Properties of Medium Density Fiberboard

Authors:

Nadir Ayrilmis, Zeki Candan, Turgay Akbulut, Ozgur Balkiz

Keywords:

contact angle; medium density fiberboard (MDF); rhododendron (R.)ponticum L.; sanding; surface absorption; surface roughness; wettability

Volume 61 (2010), Issue 2

Effect of Thermal Modification of Oak Wood on Sawdust Granularity

Authors:

Ladislav Dzurenda, Kazimierz A. Orlowski, Marek Grzeskiewicz

Keywords:

oak wood sawdust; thermal modification; frame sawing machine; granulometric analysis; granularity

Volume 61 (2010), Issue 4

Effect of Glueline Shape on Strength of Mortise and Tenon Joint

Authors:

Silvana Prekrat, Jerzy Smardzewski

Keywords:

gluelin; mortise and tenon joint; numerical analysis; wood

Volume 60 (2009), Issue 4

Effect of Feed Speed and Wood Species on Roughness of Machined Surface

Authors:

Nedim Škaljić, Ružica Beljo Lučić, Anka Ozana Čavlović, Murčo Obućina

Keywords:

surface roughness; wood planing; feed speed; wood species

Volume 59 (2008), Issue 3

Effect of technological parameters and wood properties on cutting power in plane milling of juvenile poplar wood

Authors:

Štefan Barcík, Eva Pivolusková, Richard Kminiak

Keywords:

milling; poplar; cutting power; juvenile wood; fast-growing trees

Volume 59 (2008), Issue 2

Effect of thermal post-treatment on some surface-related properties of oriented strandboards

Authors:

Cláudio Henrique Soares Del Menezzi, Raquel Bahia Ribeiro, Gerson Henrique Sternadt, Divino Eterno Teixeira, Esmeralda Yoshico Arakaki Okino

Keywords:

oriented strandboard; surface properties; thermal treatment

Volume 58 (2007), Issue 3

Effect of shear components on stress values in plywood panel subjected to tensile load

Authors:

Jaroslav Kljak, Mladen Brezović

Keywords:

plywood panel; tensile properties; stress; FEM

Volume 57 (2006), Issue 1

Assessing the effects of thickness of beech veneers on compressibility of plywoods

Authors:

Pavel Král

Keywords:

plywood; density of plywood; beech veneer; compressibility; shrinking

Volume 56 (2005), Issue 3

Project of instrumentation of cyclic multiple-spindle driller aimed at improving its machining efficiency

Authors:

Grzegorz Wieloch, Marcin Osajda

Keywords:

multiple-spindle drilling machine; instrumentation; effectiveness

Volume 54 (2003), Issue 1

Rationalization of electricity use in wood industry plants

Authors:

Miljenko Primorac

Keywords:

electricity; wood industry plants; electricity effects; tariff models

Volume 53 (2002), Issue 2

Effect of duration of storage of MUF resin on the wetting angle on beechwood

Authors:

Jože Resnik, Tomaž Sovinc

Keywords:

wetting angle; MUF adhesive; viscosity; beechwood

Volume 53 (2002), Issue 2

Wood industry as a source of air pollution

Authors:

Leon Oblak, Denis Jelačić, Josef Drábek

Keywords:

Air pollution; toxic gasses; green-house effect

Volume 48 (1997), Issue 2

SEM study of the weathering effects on painted wood

Authors:

Hrvoje Turkulin, Martin Arnold, Hilary Derbyshire, Jürgen Sell

Keywords:

SEM; photodegradation; durability; wood finishing; water-borne coatings; solvent-borne coatings

Volume 48 (1997), Issue 1

Effect of Resin and Wax on Mechanical and Physical Properties of Hardboard From Air-Laid Mats

Authors:

James H. Muehl, Andrzej M. Krzysik

Keywords:

wood fiber; polyester fiber; composites; dry-process; harboard; phenolic resin; wax; dimensional stability; mechanical properties; physical properties

Volume 44 (1993), Issue 2

The effect of blunting of the sanding belt on sanded surface roughness

Authors:

Vlatka Jirouš-Rajković

Keywords:

sanding; grit size; blunting of the sanding belt; surface roughness

Volume 43 (1992), Issue 4

The effect of bacteria on wood properties

Authors:

Radovan Despot

Keywords:

bacteria; softwood; permeability

Volume 43 (1992), Issue 3

The effect of sanding on the roughness of stained and lacquered wood surfaces

Authors:

Trajče Manev

Keywords:

sanding; grif size; surface roughness

Volume 43 (1992), Issue 3

Effect of some technological parameters on the gluing quality of laminated window profiles

Authors:

Stjepan Petrović

Keywords:

gluing; laminated windows; delamination

Volume 43 (1992), Issue 2

The effect of grit size and sanding direction on sanded surface roughness

Authors:

Vlatka Jirouš-Rajković

Keywords:

sanding; grit size; surface roughness

Volume 41 (1990), Issue 3-4

Effect of height of fir sample on shrinkage progression and on hygroscopic line (the fiber saturation point))

Authors:

Izet Horman

Keywords:

fir; shrinkage of wood; hygroscopic line (the fiber saturation point)

Volume 39 (1988), Issue 7-8

Effect of moisture and temperature upon the compression strength parallel to grains of wood

Authors:

Branko Kolin

Keywords:

compression strength; moisture of wood; temperature

Volume 38 (1987), Issue 7-8

Influence of terrain factors on merchantable timber skidding effects with frame steered skidder

Authors:

Stevan Bojanin

Keywords:

merchantable timber; wood skidding; frame steered skidder; tree-length system; assortment system; inclination of the slope; terrain condition; skidding speed; travelling empty; travelling loaded; skidding distance; fixed time; variable time; effective time; trip; standard time; daily output

Volume 35 (1984), Issue 7-8

Effect of drying method on shrinkage of spruce sawn boards

Authors:

Martin Trnka

Keywords:

shrinkage; seasoning and kiln drying

Volume 34 (1983), Issue 5-6

Effect of quality and sizes on yield of beechwood logs

Authors:

Ramiz Zubčević

Keywords:

yield of beechwood logs; method of sawing; single-stage and two-stage conversion

Volume 34 (1983), Issue 7-8

Effect of axial form and distribution of qualitative zones of unstandard beech round logs on technology and utilization

Authors:

Borislav Šoškić

Keywords:

quantitative utilization of unstandard beech logs; technology of thin round logs conversion

Volume 31 (1980), Issue 9-10

One of possible methods of rationalization of operations in the woodworking industry process

Authors:

Zdravko Fučkar

Keywords:

relation between the input and the output; establishment of condition; rationalization of moulding operations; calculation of effects

Volume 30 (1979), Issue 5-6

Practical application of the system theory in evaluation of job complexity in wood industry

Authors:

Mladen Figurić

Keywords:

job evaluation in wood industry; »input-output« method; complexity of input; complexity of system structure; complexity of output; synergical effect

Volume 29 (1978), Issue 9

Characteristical models of job evaluation in wood industry (1)

Authors:

Mladen Figurić

Keywords:

job evaluation; merit rating; normal effect; job evaluator

Volume 29 (1978), Issue 10

Characteristical models of job evaluation in wood industry (2)

Authors:

Mladen Figurić

Keywords:

job evaluation; merit rating; normal effect; job evaluator

Volume 75 (2024), Issue 2

The Effect of Citric Acid Treatment on Particleboard Properties Obtained from a Combination of Garden Tree Branches with Bagasse and Palm Leaves

Authors:

Keywords:

Effect of Natural Weathering on Performance of Wood Flour-Recycled Polypropylene Composites

Effects of Ultrasound-Assisted Varnish and Component Mixing Method on Mechanical and Physical Properties of Varnish Layer

The Effect of Type of Reinforcement, Type of Glue and Reinforcement Place on Mechanical and Physical Properties of LVL

Effects of DES and Chlorite Delignification Methods on Properties of Transparent Wood Materials

Effects of Medium Density Fiberboards (MDF) Recycling Methods on Fiber Dimensions and Some Reconstructed Board Properties

Effect of Epoxy Resin Reinforcement on Screw Withdrawal Strength of Fiberboard and Particleboard Used in Furniture Industry

Analysis of the Effect of Gypsum-Based Fire Protection Cover on Charring of Wooden Bearing Elements

Synthesis of Phenolic Resin Reinforced with TiO2 Nanoparticles and its Effect on Combustion Performance of Laminated Veneer Lumber (LVL)

The Effect of Hot and Cold Check Tests on Surface Roughness and Glossiness in Varnished Wood Material

Starch Impregnation Effect of Testliner Paper on Stiffness of Honeycomb Panels with Slender Cells

Effects of CNC Processing Parameters on Surface Quality of Wood-Based Panels Used in Furniture Industry

Effects of Exposure Time and Temperature on Screw Driving Torques in Heat-Treated Anatolian Black Pine and Sessile Oak Wood

The Effect of Sheathing Material on Racking Performance of Plywood Shear Wall

Effects of Silane Treatment on Physical and Mechanical Properties of Particleboards Prepared with Urea Formaldehyde

Effect of Acetylation and Accelerated Weathering of Nigerian Grown Rubberwood (Hevea brasiliensis, Müll. Arg.) on Equilibrium Moisture Content and Colour Change

Effects of Wooden Dowel Species, Edge Banding Thickness, and Adhesive Types on Embedded Strength in Particleboard

Effect of Soaking/Oven- Drying on Mechanical and Physical Properties of Birch (Betula spp.) Plywood

Effect of Using Urea Formaldehyde Modified with Extracts in Plywood on Formaldehyde Emission

The Effect of Artificial Weathering on Surface Properties of Thermally Modified Oriental Beech Wood

Investigation of the Effect of Using Activated Sludge Treated with Acetic Acid on Physical and Strength Properties of Recycled Pulp

Effect of Artificial Ageing on Adhesive Bonds from Heat Treated Spruce

The Effect of Using Pumice Powder and Plasticizer on Physico-Mechanical and Thermal Properties of Cement-Bonded Particleboards

The Effects of Slicing Parameters on Surface Quality of European Beech Wood

Effects of Recycled Fiber Fines on Hand Sheet Properties of Different Unbeaten and Beaten Pulps

Effect of Natural Resin from Wild Pistachio Trees on Physical Properties and Durability of Beech Wood: Alone and in Combination with Boric Acid

The Effect of Sapwood and Heartwood Differences on Mechanical Properties of Fast-Growing Tree Species

Effect of Water Repellents on Hygroscopicity and Dimensional Stability of Densified Fir and Aspen Woods

Hygrothermal Treatment of Tepa (Laureliopsis philippiana Looser) Fibers: Effects on Chemical and Physical Properties

The Effect of Mat Layers Moisture Content on Some Properties of Particleboard

Application of Artificial Neural Network to Predict the Effect of Paraffin Addition on Water Absorption and Thickness Swelling of MDF

The Effect of Thermo-Mechanical Treatment of Moso Bamboo (Phyllostachys Pubescens) on Its Sorption and Physicomechanical Properties

Effect of Pine (Pinus Sylvestris) Bark Dust on Particleboard Thickness Swelling and Internal Bond

The Effect of Chip Size and Alkaline Pre-Hydrolysis Conditions on Following Soda Pulping of Hornbeam Wood

Assessment of Efficacy and Effectiveness of Some Extracted Bio-Chemicals as Bio-Fungicides on Wood

Effect of Veneer Drying Process on Some Technological Properties of Polystyrene Composite Plywood Panels

The Effect of Using Alum Mordant in Wild Cherry Bark Dyestuff for the Production of UV Resistant Colored Paper

Effect of Accelerated Weathering Test on Selected Properties of Bamboo, Scots Pine and Oriental Beech Wood Treated with Waterborne Preservatives

The Effect of Nano TiO2 and Nano Boron Nitride on Mechanical, Morphological and Thermal Properties of WF/PP Composites

The Effect of Nanoboron Nitride on Some Properties of Biopolymer Nanocomposites with Cellulose Nanofibrils and Nanoclays

The Effects of Press Method and Coating Material Differences on the Properties of Medium Density Fiberboard

Effects of Nano-Clay on Physical and Mechanical Properties of Medium-Density Fiberboards Made from Wood and Chicken-Feather Fibers and Two Types of Resins

Investigation of the Effects of Heat Treatment Applied to Beech Plywood

Effects of Catalysts on Modulus of Rupture and Chemical Structure of Heat – Treated Wood

Effect of Thermal Treatment on Combustion Process of Spruce Wood (Picea abies)

Effect of Extraction Technique on Composition of Volatile Constituents of Oleoresin from Pinus Brutia Ten.

Production Management Model in Small and Medium Enterprises in Croatia

The Effect of Heat Modification and Densification on Physical Properties of Poplar Wood

Determination of the Effect of Liquid Glass (SiO2) on Color Stability of Wood Stained by Natural Dyes

The Effects of Lignocellulosic Fillers on Mechanical, Morphological and Thermal Properties of Wood Polymer Composites

Effects of Industrial Heat Treatment on Some Physical and Mechanical Properties of Iroko Wood

Effect of Press Cycle Time on Application Behavior of Board Made from Chemically Modified Particles

Effect of Climatic Conditions on Tree-Ring Widths in Black Locust (Robinia pseudoacacia L.) in the city of Wrocław

The Effect of Altitude Difference on Physical and Mechanical Properties of Scots Pine Wood Grown in Turkey - Sinop Province

Surface Roughness and Wettability Variation: The effect of Cutting Distance during Milling of Pinus Radiata Wood

Effects of Different Kinds of Coating Materials on Properties of Flat Pressed WPC Panels

The Effects of Poly(vinyl acetate) Filled with Nanoclay and Cellulose Nanofibrils on Adhesion Strength of Poplar and Scots Pine Wood

Effects of Machining Conditions on Surface Roughness in Planing and Sanding of Solid Wood

Effect of Heat Treatment of Wild Cherry Wood on Abrasion Resistance and Withdrawal Capacity of Screws

Effects of Nanosilver-Impregnation and Heat Treatment on Coating Pulloff Adhesion Strength on Solid Wood

Study on Energy Requirement of Wood Chip Compaction

Effect of Refiner Plate Pattern Design on Refined Fibre Size Distribution – a Time Series Study

Effectiveness of Asymmetrical Veneering with Hardwood Species of Varying Shrinkage and Porosity

An Innovative Approach to the Forecasting of Energetic Effects While Wood Sawing

Effect of Temperature on Radial Growth of Beech and Pine Saplings in the First and Second Year of the Experiment: a Comparison

The Effect of Aging on Various Physical and Mechanical Properties of Scotch Pine Wood Used in Construction of Historical Safranbolu Houses

Effect of Cultivation Methods on Wood Static Bending Properties in Alnus Glutinosa

Effect of Seed Source on Physical Properties of Scots Pine (a Case Study in Neka, Iran)

Effects of Aging of Polyurethane Foams in the Context of Furniture Design

The Dilemma Whether to Produce Glued or Sawn Wooden Beams?

CE Marking of Structural Timber: the European Standardization Framework and its Effects on Italian Manufacturers

The Effect of Residual Swelling after Drying on Internal Bond in OSB

Drying Kinetics of Poplar (Populus Deltoides) Wood Particles by a Convective Thin Layer Dryer

Effect of Hydro- and Hygro-Thermal Treatments on Some Wood Properties of Pinus Radiata and Pseudotsuga Menziesii

Determinants of Effects of Foreign Direct Investment in Terms of Slovak Republic and Wood-Processing Industry of Slovakia

Effect of Sanding on Surface Properties of Medium Density Fiberboard

Effect of Thermal Modification of Oak Wood on Sawdust Granularity

Effect of Glueline Shape on Strength of Mortise and Tenon Joint

Effect of Feed Speed and Wood Species on Roughness of Machined Surface

Effect of technological parameters and wood properties on cutting power in plane milling of juvenile poplar wood