Archive

Volume 75 (2024), Issue 2

Dimensional Stability Properties of Medium-Density Fiberboards Produced Using Silicone-Based Chemicals

Authors:

Meryem Ondaral, Mustafa Usta, Sedat Ondaral

Keywords:

MDF; hydrophobic; silicone-based chemical; water repellent; dimensional stability

Volume 75 (2024), Issue 2

The Effect of Type of Reinforcement, Type of Glue and Reinforcement Place on Mechanical and Physical Properties of LVL

Authors:

İlkay Atar, Fatih Mengeloğlu

Keywords:

reinforced LVL; glass fiber; basalt; epoxy; phenol formaldehyde

Volume 75 (2024), Issue 1

Effect of Natural Weathering on Performance of Wood Flour-Recycled Polypropylene Composites

Authors:

Saeed Kazemi Najafi, Sima Hatami Naderloo, Behbood Mohebby

Keywords:

wood plastic composites; recycled polypropylene; natural weathering; discoloration, surface roughness

Volume 74 (2023), Issue 1

Effects of Medium Density Fiberboards (MDF) Recycling Methods on Fiber Dimensions and Some Reconstructed Board Properties

Authors:

Çagri Olgun, Saim Ateş, Emre Uzer

Keywords:

waste MDF; recycling; recycled fibers; fiber properties; board strenght

Volume 74 (2023), Issue 4

Effect of Epoxy Resin Reinforcement on Screw Withdrawal Strength of Fiberboard and Particleboard Used in Furniture Industry

Authors:

Mesut Uysal, Cagatay Tasdemir, Memis Dogan

Keywords:

epoxy resin; reinforcement; screw withdrawal strength; medium density fiberboard; particleboard

Volume 73 (2022), Issue 1

Multivariate Hotelling T2 Control Chart for Monitoring Some Quality Characteristics in Medium Density Fiberboard Manufacturing Process

Authors:

Sebahattin Tiryaki, Aytaç Aydın

Keywords:

wood based panel industry; Hotelling T2; quality improvement; process control

Volume 73 (2022), Issue 1

Reinforcement of Joints Between LVL Members with GFRP and Finite Element Analysis

Authors:

Mosayeb Dalvand, Ghanbar Ebrahimi, Kambiz Pourtahmasi

Keywords:

veneer lumber; glass fiber reinforced polymer; finite element method; failure modes

Volume 73 (2022), Issue 4

Determination of Physical and Mechanical Properties of Waste Paper Boards Supported by Wood Chips and Chopped E-glass Fiber

Authors:

Eser Sozen

Keywords:

office waste paper; paper board; wood chips; chopped glass fiber

Volume 72 (2021), Issue 3

Investigation of the Effect of Using Activated Sludge Treated with Acetic Acid on Physical and Strength Properties of Recycled Pulp

Authors:

Naghmeh Amani, Ramin Vaysi, Abdollah Najafi, Seyed Eshagh Ebadi

Keywords:

activated sludge; acetic acid; newsprint paper; eco-friendly bio composite; resistance features

Volume 72 (2021), Issue 2

Fiberglass Plaster Mesh as Reinforcement for Cement Bonded Particleboard

Authors:

Hasan Hüseyin Taş

Keywords:

cement bonded particleboard; fiberglass plaster mesh; physical and mechanical properties

Volume 72 (2021), Issue 3

Thermal Behavior of Insulation Fiberboards Made from MDF and Paper Wastes

Authors:

Bita Moezzipour, Aida Moezzipour

Keywords:

insulation fiberboards; recycling; thermal stability; MDF wastes; waste paper

Volume 71 (2020), Issue 4

Effects of Recycled Fiber Fines on Hand Sheet Properties of Different Unbeaten and Beaten Pulps

Authors:

Sezgin Koray Gülsoy, Saffet Uysal

Keywords:

Populus tremula L.; Pinus brutia Ten.; recycled fiber; kraft; fines; pulp and paper properties

Volume 71 (2020), Issue 4

Finite Element Modeling of Fiber Reinforced Polymer-Based Wood Composites Used in Furniture Construction Considering Semi-Rigid Connections

Authors:

Mustafa Zor, Murat Emre Kartal

Keywords:

fiber reinforced polymer (FRP); furniture; glue; diagonal tension loading; finite element method (FEM)

Volume 71 (2020), Issue 1

Hygrothermal Treatment of Tepa (Laureliopsis philippiana Looser) Fibers: Effects on Chemical and Physical Properties

Authors:

Rommel Crespo Gutiérrez, Marco Torres Uribe, Hernán Wilson

Keywords:

hygrothermal treatment; Laureliopsis philippiana; fibers; physical and chemical properties; acidity; fiberboards

Volume 70 (2019), Issue 3

Application of Artificial Neural Network to Predict the Effect of Paraffin Addition on Water Absorption and Thickness Swelling of MDF

Authors:

Ayşenur Gürgen, Derya Ustaömer, Sibel Yildiz

Keywords:

artificial neural network; water absorption; thickness swelling; medium density fiberboard; paraffin

Volume 70 (2019), Issue 2

Thermal Stability of Wood Fibers Produced from Recycled Medium Density Fiberboards

Authors:

Mohammad Ahmadi, Bita Moezzipour, Aida Moezzipour

Keywords:

thermal stability; recycled fibers; MDF; electrical heating; hydrothermal

Volume 69 (2018), Issue 4

Effects of Nano-Clay on Physical and Mechanical Properties of Medium-Density Fiberboards Made from Wood and Chicken-Feather Fibers and Two Types of Resins

Authors:

Pantea Omrani, Hamid Reza Taghiyari, Mostafa Zolghadr

Keywords:

feather fibers; mineral materials; nano-composites; clay nanofibers; wood fiber

Volume 69 (2018), Issue 4

Screw Withdrawal Resistance and Surface Soundness of Three-Layer Fiberboard Having Coarse Fibers in Core Layer

Authors:

Nadir Ayrilmis, Turgay Akbulut

Keywords:

coarse fiber; resin; surface soundness; screw withdrawal resistance; three-layer fibreboard

Volume 69 (2018), Issue 2

Assessment of Mechanical and Morphological Properties of New Poly Lactic Acid (PLA) / Wood Fibers / Nanographene Composite

Authors:

Mojtaba Asadi, Behzad Bazyar, Amir Hooman Hemmasi, Ismail Ghsemi, Mohammad Talaeipoor

Keywords:

Polylactic acid; wood fiber; nanographene; mechanical properties

Volume 69 (2018), Issue 2

Sudanese Dicots as Alternative Fiber Sources for Pulp and Papermaking

Authors:

Haroon Saeed, Yu Liu, Lucian Lucia, Honglei Chen

Keywords:

Sudanese annual plants; castor bean; Leptadenia pyrotechnica; pulp and paper

Volume 69 (2018), Issue 1

Chemical Composition, Fiber Morphology, and Kraft Pulping of Bracken Stalks (Pteridium aquilinum (L.) Kuhn)

Authors:

Sezgin Koray Gülsoy, Serhat Şimşir

Keywords:

bracken; KBH4; kraft; NaBH4; Pteridium aquilinum (L.) Kuhn.; paper properties

Volume 69 (2018), Issue 1

Lightweight Flat Pressed Wood Plastic Composites: Possibility of Manufacture and Properties

Authors:

Pavlo Lyutyy, Pavlo Bekhta, Galyna Ortynska

Keywords:

lightweight wood plastic composites; recycled low density polyethylene; expanded polystyrene; wood particles; lamination

Volume 69 (2018), Issue 1

The Effects of Press Method and Coating Material Differences on the Properties of Medium Density Fiberboard

Authors:

Songül Kayış, İbrahim Bektaş, Ayşenur Kılıç

Keywords:

MDF; wrapping method; membrane method; high gloss PVC; mat PVC

Volume 68 (2017), Issue 3

Fiber Characteristics of White Poplar (Populus alba L.) Juvenile Wood along the Drava River

Authors:

Iva Ištok, Bogoslav Šefc, Marin Hasan, Gordana Popović, Tomislav Sedlar

Keywords:

Populus alba L.; juvenile wood; fiber characteristics; wood anatomical properties variation

Volume 67 (2016), Issue 2

Effects of Different Kinds of Coating Materials on Properties of Flat Pressed WPC Panels

Authors:

Pavlo Bekhta, Pavlo Lyutyy, Galyna Ortynska

Keywords:

coating materials; flat pressing; recycled polyethylene; veneer; wood plastic composites

Volume 66 (2015), Issue 1

Laccase Application for Upgrading of Lignocellulose Fibers

Authors:

Maja Vaukner Gabrič, Franc Pohleven

Keywords:

laccase; laccases mediators; lignocellulose material; lignin functionalization

Volume 65 (2014), Issue 2

Mode I Critical Stress Intensity Factor of Medium - Density Fiberboard Obtained by Single-Edge - Notched Bending Test

Authors:

Hiroshi Yoshihara, Hikaru Mizuno

Keywords:

additional crack length; Mode I critical stress intensity factor; medium-density fi berboard (MDF); western hemlock; single-edge-notched bending (SENB) test

Volume 64 (2013), Issue 4

Effect of Cultivation Methods on Wood Static Bending Properties in Alnus Glutinosa

Authors:

Majid Kiaei

Keywords:

Alnus glutinosa; modulus of elasticity; modulus of rupture; Fiber stress at elastic limit; cultivation methods (natural and plantation forest)

Volume 64 (2013), Issue 3

Oxidative Activation of Bagasse Fibers Surfaces in Medium Density Fiberboard Manufacturing

Authors:

Kazem Doosthosseini, Hamid Zarea Hosseinabadi, Payam Moradpour

Keywords:

medium density fiberboard; bagasse; oxidative activation; nitric acid; potassium dichromate

Volume 62 (2011), Issue 4

Extraction Methods of Spanish Broom (Spartium Junceum L.)

Authors:

Drago Katović, Andrea Katović, Alan Antonović

Keywords:

Spanish Broom fibers; fiber extraction; chemical composition; FTIR; MW

Volume 61 (2010), Issue 4

Influence of Synthetic Fibers Angle Orientation on Bending Properties of Composite Plywood

Authors:

Mladen Brezović, Jaroslav Kljak, Stjepan Pervan, Alan Antonović

Keywords:

veneer; carbon fibers; angle of orientation; plywood; bending properties

Volume 61 (2010), Issue 3

Effect of Sanding on Surface Properties of Medium Density Fiberboard

Authors:

Nadir Ayrilmis, Zeki Candan, Turgay Akbulut, Ozgur Balkiz

Keywords:

contact angle; medium density fiberboard (MDF); rhododendron (R.)ponticum L.; sanding; surface absorption; surface roughness; wettability

Volume 61 (2010), Issue 3

MDF/HDF Production from Plantation Wood Species

Authors:

Tibor Alpár, Tibor Fáczán, István Rácz, Gabor Kátoli

Keywords:

MDF; HDF; wood plantation; Pannonia poplar; I214 poplar; black locust; Austrian pine; fiberboard production; physical aspects of MDF/HDF boards

Volume 59 (2008), Issue 4

Fibers of secondary ligno-cellulose materials and their influence on properties of insulating fiberboards

Authors:

Henrich Lübke, Vlastimil Borùvka, Marian Babiak

Keywords:

insulating fiberboards; secondary ligno-cellulose materials; abraded fiber

Volume 53 (2002), Issue 4

Recycled paper – the influence of digital prints

Authors:

Branka Lozo, Ivana Bolanča, Zdenka Bolanča, Damir Modrić

Keywords:

Recycled fibres; mechanical properties; tensile strength; tearing resistance; bursting resistance; digital offset printing; conventional offset printing

Volume 53 (2002), Issue 1

Influence of carbon fibers on some relevant properties of veneer plywood

Authors:

Mladen Brezović, Vladimir Jambreković, Jaroslav Kljak

Keywords:

veneer plywood; carbon fibres; mechanical properties; resorcine phenol formaldehyde adhesive

Volume 48 (1997), Issue 1

Effect of Resin and Wax on Mechanical and Physical Properties of Hardboard From Air-Laid Mats

Authors:

James H. Muehl, Andrzej M. Krzysik

Keywords:

wood fiber; polyester fiber; composites; dry-process; harboard; phenolic resin; wax; dimensional stability; mechanical properties; physical properties

Volume 42 (1991), Issue 1-2

Some physical properties of fir-wood from Gorski kotar

Authors:

Tomislav Sinković

Keywords:

fir-wood; density of oven dry wood; fiber saturation point; volumetric shrinkage; moisture content after felling

Volume 41 (1990), Issue 3-4

Effect of height of fir sample on shrinkage progression and on hygroscopic line (the fiber saturation point))

Authors:

Izet Horman

Keywords:

fir; shrinkage of wood; hygroscopic line (the fiber saturation point)

Volume 37 (1986), Issue 1-2

Saturation points of the bark fiber of beech, hornbeam, oak, ash, poplar and fir

Authors:

Stanislav Bađun

Keywords:

bark; hygroscopic features

Dimensional Stability Properties of Medium-Density Fiberboards Produced Using Silicone-Based Chemicals

The Effect of Type of Reinforcement, Type of Glue and Reinforcement Place on Mechanical and Physical Properties of LVL

Effect of Natural Weathering on Performance of Wood Flour-Recycled Polypropylene Composites

Effects of Medium Density Fiberboards (MDF) Recycling Methods on Fiber Dimensions and Some Reconstructed Board Properties

Effect of Epoxy Resin Reinforcement on Screw Withdrawal Strength of Fiberboard and Particleboard Used in Furniture Industry

Multivariate Hotelling T2 Control Chart for Monitoring Some Quality Characteristics in Medium Density Fiberboard Manufacturing Process

Reinforcement of Joints Between LVL Members with GFRP and Finite Element Analysis

Determination of Physical and Mechanical Properties of Waste Paper Boards Supported by Wood Chips and Chopped E-glass Fiber

Investigation of the Effect of Using Activated Sludge Treated with Acetic Acid on Physical and Strength Properties of Recycled Pulp

Fiberglass Plaster Mesh as Reinforcement for Cement Bonded Particleboard

Thermal Behavior of Insulation Fiberboards Made from MDF and Paper Wastes

Effects of Recycled Fiber Fines on Hand Sheet Properties of Different Unbeaten and Beaten Pulps

Finite Element Modeling of Fiber Reinforced Polymer-Based Wood Composites Used in Furniture Construction Considering Semi-Rigid Connections

Hygrothermal Treatment of Tepa (Laureliopsis philippiana Looser) Fibers: Effects on Chemical and Physical Properties

Application of Artificial Neural Network to Predict the Effect of Paraffin Addition on Water Absorption and Thickness Swelling of MDF

Thermal Stability of Wood Fibers Produced from Recycled Medium Density Fiberboards

Effects of Nano-Clay on Physical and Mechanical Properties of Medium-Density Fiberboards Made from Wood and Chicken-Feather Fibers and Two Types of Resins

Screw Withdrawal Resistance and Surface Soundness of Three-Layer Fiberboard Having Coarse Fibers in Core Layer

Assessment of Mechanical and Morphological Properties of New Poly Lactic Acid (PLA) / Wood Fibers / Nanographene Composite

Sudanese Dicots as Alternative Fiber Sources for Pulp and Papermaking

Chemical Composition, Fiber Morphology, and Kraft Pulping of Bracken Stalks (Pteridium aquilinum (L.) Kuhn)

Lightweight Flat Pressed Wood Plastic Composites: Possibility of Manufacture and Properties

The Effects of Press Method and Coating Material Differences on the Properties of Medium Density Fiberboard

Fiber Characteristics of White Poplar (Populus alba L.) Juvenile Wood along the Drava River

Effects of Different Kinds of Coating Materials on Properties of Flat Pressed WPC Panels

Laccase Application for Upgrading of Lignocellulose Fibers

Mode I Critical Stress Intensity Factor of Medium - Density Fiberboard Obtained by Single-Edge - Notched Bending Test

Effect of Cultivation Methods on Wood Static Bending Properties in Alnus Glutinosa

Oxidative Activation of Bagasse Fibers Surfaces in Medium Density Fiberboard Manufacturing

Extraction Methods of Spanish Broom (Spartium Junceum L.)

Influence of Synthetic Fibers Angle Orientation on Bending Properties of Composite Plywood

Effect of Sanding on Surface Properties of Medium Density Fiberboard

MDF/HDF Production from Plantation Wood Species

Fibers of secondary ligno-cellulose materials and their influence on properties of insulating fiberboards

Recycled paper – the influence of digital prints

Influence of carbon fibers on some relevant properties of veneer plywood

Effect of Resin and Wax on Mechanical and Physical Properties of Hardboard From Air-Laid Mats

Some physical properties of fir-wood from Gorski kotar

Effect of height of fir sample on shrinkage progression and on hygroscopic line (the fiber saturation point))

Saturation points of the bark fiber of beech, hornbeam, oak, ash, poplar and fir

Publisher